firmware/src/bsp/ain.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "ain.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,7 +11,7 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::AnalogIn::AnalogIn(uint8_t adc_ch)
+bsp::AnalogIn::AnalogIn(uint8_t adc_ch)
 {
 	this->adc_ch = adc_ch;
 	this->mul = DEF_AIN_MUL;
@@ -20,7 +20,7 @@ board::AnalogIn::AnalogIn(uint8_t adc_ch)
 	this->last_read = 0;
 }
 
-uint16_t board::AnalogIn::read(void)
+uint16_t bsp::AnalogIn::read(void)
 {
 	//Read ADC
 	uint16_t raw = mcu::adc_read(this->adc_ch);

firmware/src/bsp/ain.h

@@ -4,7 +4,7 @@
 /**** Includes ****/
 #include <stdint.h>
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 static const uint8_t DEF_AIN_MUL = 215;

firmware/src/bsp/din.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "din.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,7 +11,7 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::DigitalIn::DigitalIn(uint8_t gpio_ch, uint8_t inverted, uint8_t init_value)
+bsp::DigitalIn::DigitalIn(uint8_t gpio_ch, uint8_t inverted, uint8_t init_value)
 {
 	this->gpio_ch = gpio_ch;
 	this->invert = inverted;
@@ -20,12 +20,12 @@ board::DigitalIn::DigitalIn(uint8_t gpio_ch, uint8_t inverted, uint8_t init_valu
 	else this->last_read = DIN_LOW;
 }
 
-board::DigitalIn::~DigitalIn(void)
+bsp::DigitalIn::~DigitalIn(void)
 {
 	return;
 }
 
-uint8_t board::DigitalIn::read(void)
+uint8_t bsp::DigitalIn::read(void)
 {
 	uint8_t lvl = mcu::gpio_read(this->gpio_ch);
 	

firmware/src/bsp/din.h

@@ -4,7 +4,7 @@
 /**** Includes ****/
 #include <stdint.h>
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 const uint8_t DIN_LOW  = 0;

firmware/src/bsp/dio.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "dio.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,17 +11,17 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::DigitalIO::DigitalIO(uint8_t gpio_ch, uint8_t init_value) : DigitalIn(gpio_ch, 0, init_value), DigitalOut(gpio_ch, 0)
+bsp::DigitalIO::DigitalIO(uint8_t gpio_ch, uint8_t init_value) : DigitalIn(gpio_ch, 0, init_value), DigitalOut(gpio_ch, 0)
 {
 	return;
 }
 
-board::DigitalIO::~DigitalIO(void)
+bsp::DigitalIO::~DigitalIO(void)
 {
 	this->write(DOUT_HIZ);
 }
 
-uint8_t board::DigitalIO::is_io_match(void)
+uint8_t bsp::DigitalIO::is_io_match(void)
 {
 	if(this->last_set == DOUT_HIZ) return 1;
 	

firmware/src/bsp/dio.h

@@ -6,7 +6,7 @@
 #include "din.h"
 #include "dout.h"
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 const int8_t DIO_LOW  = 0;

firmware/src/bsp/dout.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "dout.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,19 +11,19 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::DigitalOut::DigitalOut(uint8_t gpio_ch, uint8_t inverted)
+bsp::DigitalOut::DigitalOut(uint8_t gpio_ch, uint8_t inverted)
 {
 	this->gpio_ch = gpio_ch;
 	this->invert = inverted;
 	this->write(DOUT_HIZ);
 }
 
-board::DigitalOut::~DigitalOut(void)
+bsp::DigitalOut::~DigitalOut(void)
 {
 	this->write(DOUT_HIZ);
 }
 
-void board::DigitalOut::write(int8_t level)
+void bsp::DigitalOut::write(int8_t level)
 {
 	if(level > 0)
 	{
@@ -44,7 +44,7 @@ void board::DigitalOut::write(int8_t level)
 	}
 }
 
-int8_t board::DigitalOut::get_set_level(void)
+int8_t bsp::DigitalOut::get_set_level(void)
 {
 	return this->last_set;
 }

firmware/src/bsp/dout.h

@@ -4,7 +4,7 @@
 /**** Includes ****/
 #include <stdint.h>
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 const int8_t DOUT_LOW  = 0;

firmware/src/bsp/halfbridge.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "halfbridge.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,7 +11,7 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::Hafbridge::Hafbridge(uint8_t hs_pwm_ch, uint8_t ls_gpio_ch, uint8_t max_dc)
+bsp::Hafbridge::Hafbridge(uint8_t hs_pwm_ch, uint8_t ls_gpio_ch, uint8_t max_dc)
 {
 	this->pwm_ch  = hs_pwm_ch;	
 	this->gpio_ch = ls_gpio_ch;
@@ -23,13 +23,13 @@ board::Hafbridge::Hafbridge(uint8_t hs_pwm_ch, uint8_t ls_gpio_ch, uint8_t max_d
 	this->disable();
 }
 
-board::Hafbridge::~Hafbridge(void)
+bsp::Hafbridge::~Hafbridge(void)
 {
 	this->last_duty = 0;
 	this->disable();
 }
 
-void board::Hafbridge::write(uint16_t dividend)
+void bsp::Hafbridge::write(uint16_t dividend)
 {
 	// Limit duty
 	if(dividend > this->max_dc) dividend = this->max_dc;
@@ -41,32 +41,32 @@ void board::Hafbridge::write(uint16_t dividend)
 	mcu::pwm_write(this->pwm_ch, dividend);
 }
 
-void board::Hafbridge::write(uint8_t percent)
+void bsp::Hafbridge::write(uint8_t percent)
 {
 	// Convert to dividend/0xFFFF
 	this->write(util::percent_to_16b(percent));
 }
 
-void board::Hafbridge::enable(void)
+void bsp::Hafbridge::enable(void)
 {
 	mcu::gpio_write(this->gpio_ch, mcu::LEVEL_HIGH);
 	this->enabled = 1;
 	this->write(this->last_duty);
 }
 
-void board::Hafbridge::disable(void)
+void bsp::Hafbridge::disable(void)
 {
 	mcu::pwm_write(this->pwm_ch, 0);
 	mcu::gpio_write(this->gpio_ch, mcu::LEVEL_LOW);
 	this->enabled = 0;
 }
 
-uint8_t board::Hafbridge::get_set_duty(void)
+uint8_t bsp::Hafbridge::get_set_duty(void)
 {
 	return this->last_duty;
 }
 
-uint8_t board::Hafbridge::is_enabled(void)
+uint8_t bsp::Hafbridge::is_enabled(void)
 {
 	return this->enabled;
 }

firmware/src/bsp/halfbridge.h

@@ -4,7 +4,7 @@
 /**** Includes ****/
 #include <stdint.h>
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 class Hafbridge

firmware/src/bsp/pwm.cpp

@@ -3,7 +3,7 @@
 #include "mcu/mcu_hal.h"
 #include "pwm.h"
 
-using namespace board;
+using namespace bsp;
 
 /**** Private definitions ****/
 /**** Private constants ****/
@@ -11,18 +11,18 @@ using namespace board;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-board::PWMout::PWMout(uint8_t pwm_ch)
+bsp::PWMout::PWMout(uint8_t pwm_ch)
 {
 	this->pwm_ch = pwm_ch;
 	this->write(0);
 }
 
-board::PWMout::~PWMout(void)
+bsp::PWMout::~PWMout(void)
 {
 	this->write(0);
 }
 
-void board::PWMout::write(uint8_t duty)
+void bsp::PWMout::write(uint8_t duty)
 {
 	// Convert percent to 16b duty cycle
 	uint16_t dc = util::percent_to_16b(duty);
@@ -32,7 +32,7 @@ void board::PWMout::write(uint8_t duty)
 	this->last_duty = duty;
 }
 
-uint8_t board::PWMout::get_set_duty(void)
+uint8_t bsp::PWMout::get_set_duty(void)
 {
 	return this->last_duty;
 }

firmware/src/bsp/pwm.h

@@ -4,7 +4,7 @@
 /**** Includes ****/
 #include <stdint.h>
 
-namespace board {
+namespace bsp {
 
 /**** Public definitions ****/
 class PWMout

firmware/src/hw/button.cpp

@@ -10,12 +10,12 @@ using namespace hw;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-hw::Button::Button(board::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state)
+hw::Button::Button(bsp::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state)
 {
 	this->din_ch = din_ch;
 	
-	if(act_lvl) this->act_lvl = board::DIN_HIGH;
-	else this->act_lvl = board::DIN_LOW;
+	if(act_lvl) this->act_lvl = bsp::DIN_HIGH;
+	else this->act_lvl = bsp::DIN_LOW;
 	
 	this->dbnc_cnter = 0;
 	this->dbnc_lim = dbnc_lim;
@@ -32,10 +32,10 @@ hw::Button::~Button(void)
 	return;
 }
 
-uint8_t hw::Button::read(void)
+uint8_t hw::Button::update(void)
 {
 	// Read din level
-	uint8_t lvl = this->din_ch->read();
+	uint8_t lvl = this->din_ch->last_read;
 	
 	// Increase state counter
 	this->time = util::sat_add(this->time, 1);
@@ -60,7 +60,7 @@ uint8_t hw::Button::read(void)
 	return this->state;
 }
 
-uint8_t hw::Button::force_read(void)
+uint8_t hw::Button::force_update(void)
 {
 	// Read din level
 	uint8_t lvl = this->din_ch->read();

firmware/src/hw/button.h

@@ -3,7 +3,7 @@
 
 /**** Includes ****/
 #include <stdint.h>
-#include "../board/din.h"
+#include "../bsp/din.h"
 
 namespace hw {
 
@@ -14,12 +14,12 @@ const uint8_t BUTTON_ON = 1;
 class Button
 {
 	protected:
-	board::DigitalIn* din_ch;
+	bsp::DigitalIn* din_ch;
 	uint8_t act_lvl;
 	uint8_t dbnc_cnter;
 	
 	public:
-	Button(board::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state);
+	Button(bsp::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state);
 	~Button(void);
 	
 	uint8_t state;
@@ -27,8 +27,8 @@ class Button
 	uint8_t dbnc_lim;
 	uint8_t is_new;
 	
-	uint8_t read(void);
-	uint8_t force_read(void);
+	uint8_t update(void);
+	uint8_t force_update(void);
 };
 
 /**** Public function declarations ****/

firmware/src/hw/cv_otput.cpp

@@ -10,9 +10,10 @@ using namespace hw;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-hw::CVoutput::CVoutput(board::Hafbridge* hbridge)
+hw::CVoutput::CVoutput(bsp::Hafbridge* hbridge, bsp::AnalogIn* supply_u)
 {
 	this->hbridge = hbridge;
+	this->supply = supply_u;
 	this->target = 0;
 	this->min_out = 0;
 	this->hbridge->disable();
@@ -20,18 +21,18 @@ hw::CVoutput::CVoutput(board::Hafbridge* hbridge)
 
 hw::CVoutput::~CVoutput(void)
 {
-	this->hbridge->write((uint16_t)0);
+	this->hbridge->write((uint16_t)0x0000);
 	this->hbridge->disable();
 	return;
 }
 
-void hw::CVoutput::update(uint16_t supply_mv)
+void hw::CVoutput::update(void)
 {
 	// Check target	
 	if((this->target < this->min_out)&&(this->target > 0)) this->target = this->min_out;
 	
 	// Set output
-	this->hbridge->write(util::sat_ratio(this->target, supply_mv));
+	this->hbridge->write(util::sat_ratio(this->target, this->supply->last_read));
 }
 
 void hw::CVoutput::enable(void)

firmware/src/hw/cv_output.h

@@ -3,7 +3,8 @@
 
 /**** Includes ****/
 #include <stdint.h>
-#include "../board/halfbridge.h"
+#include "../bsp/ain.h"
+#include "../bsp/halfbridge.h"
 
 namespace hw {
 
@@ -12,16 +13,17 @@ namespace hw {
 class CVoutput
 {
 	protected:
-	board::Hafbridge* hbridge;
+	bsp::Hafbridge* hbridge;
+	bsp::AnalogIn* supply;
 	
 	public:
-	CVoutput(board::Hafbridge* hbridge);
+	CVoutput(bsp::Hafbridge* hbridge, bsp::AnalogIn* supply_u);
 	~CVoutput(void);
 	
 	uint16_t target;
 	uint16_t min_out;
 	
-	void update(uint16_t supply_mv);
+	void update(void);
 	void enable(void);
 	void disable(void);
 	uint8_t is_enabled(void);

firmware/src/hw/display_led.cpp

@@ -13,7 +13,7 @@ static uint8_t img_gen_dot20(uint8_t percent);
 static uint8_t img_gen_bar(uint8_t percent);
 
 /**** Public function definitions ****/
-hw::DisplayLed::DisplayLed(board::DigitalOut* led0, board::DigitalOut* led1, board::DigitalOut* led2, board::DigitalOut* led3, board::DigitalOut* led4, board::DigitalOut* led5, board::PWMout* common)
+hw::DisplayLed::DisplayLed(bsp::DigitalOut* led0, bsp::DigitalOut* led1, bsp::DigitalOut* led2, bsp::DigitalOut* led3, bsp::DigitalOut* led4, bsp::DigitalOut* led5, bsp::PWMout* common)
 {
 	this->led0 = led0;
 	this->led1 = led1;

firmware/src/hw/display_led.h

@@ -3,8 +3,8 @@
 
 /**** Includes ****/
 #include <stdint.h>
-#include "../board/dout.h"
-#include "../board/pwm.h"
+#include "../bsp/dout.h"
+#include "../bsp/pwm.h"
 
 namespace hw {
 
@@ -13,13 +13,13 @@ namespace hw {
 class DisplayLed
 {
 	protected:
-	board::DigitalOut* led0;
-	board::DigitalOut* led1;
-	board::DigitalOut* led2;
-	board::DigitalOut* led3;
-	board::DigitalOut* led4;
-	board::DigitalOut* led5;
-	board::PWMout* common;
+	bsp::DigitalOut* led0;
+	bsp::DigitalOut* led1;
+	bsp::DigitalOut* led2;
+	bsp::DigitalOut* led3;
+	bsp::DigitalOut* led4;
+	bsp::DigitalOut* led5;
+	bsp::PWMout* common;
 	
 	public:
 	typedef enum {
@@ -28,7 +28,7 @@ class DisplayLed
 		LED_DSP_BAR
 	} style_t;
 	
-	DisplayLed(board::DigitalOut* led0, board::DigitalOut* led1, board::DigitalOut* led2, board::DigitalOut* led3, board::DigitalOut* led4, board::DigitalOut* led5, board::PWMout* common);
+	DisplayLed(bsp::DigitalOut* led0, bsp::DigitalOut* led1, bsp::DigitalOut* led2, bsp::DigitalOut* led3, bsp::DigitalOut* led4, bsp::DigitalOut* led5, bsp::PWMout* common);
 	~DisplayLed(void);
 	
 	void show_percent(uint8_t percent, style_t style);

firmware/src/hw/potentiometer.cpp

@@ -11,7 +11,7 @@ using namespace hw;
 /**** Private function declarations ****/
 
 /**** Public function definitions ****/
-hw::Potentiometer::Potentiometer(board::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone)
+hw::Potentiometer::Potentiometer(bsp::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone)
 {
 	this->ain_ch = ain_ch;
 	this->low_deadzone = low_deadzone;
@@ -24,11 +24,8 @@ hw::Potentiometer::~Potentiometer(void)
 	return;
 }
 
-uint8_t hw::Potentiometer::read(void)
+uint8_t hw::Potentiometer::update(void)
 {
-	// Update input
-	this->ain_ch->read();
-	
 	// Calculate percent
 	this->percent = util::interpolate(this->ain_ch->last_read, this->low_deadzone, this->high_deadzone, 0, 100);
 	

firmware/src/hw/potentiometer.h

@@ -3,7 +3,7 @@
 
 /**** Includes ****/
 #include <stdint.h>
-#include "../board/ain.h"
+#include "../bsp/ain.h"
 
 namespace hw {
 
@@ -12,17 +12,17 @@ namespace hw {
 class Potentiometer
 {
 	protected:
-	board::AnalogIn* ain_ch;
+	bsp::AnalogIn* ain_ch;
 	
 	public:
-	Potentiometer(board::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone);
+	Potentiometer(bsp::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone);
 	~Potentiometer(void);
 	
 	uint16_t low_deadzone;
 	uint16_t high_deadzone;
 	uint8_t percent;
 	
-	uint8_t read(void);
+	uint8_t update(void);
 };
 
 /**** Public function declarations ****/

firmware/src/main.cpp

@@ -1,13 +1,13 @@
 /**** Includes ****/
 #include "utils/utils.h"
 
-#include "board/mcu/mcu_hal.h"
-#include "board/ain.h"
-#include "board/din.h"
-#include "board/dout.h"
-#include "board/dio.h"
-#include "board/halfbridge.h"
-#include "board/pwm.h"
+#include "bsp/mcu/mcu_hal.h"
+#include "bsp/ain.h"
+#include "bsp/din.h"
+#include "bsp/dout.h"
+#include "bsp/dio.h"
+#include "bsp/halfbridge.h"
+#include "bsp/pwm.h"
 
 #include "hw/button.h"
 #include "hw/potentiometer.h"
@@ -15,63 +15,49 @@
 #include "hw/cv_output.h"
 
 /**** Private definitions ****/
-static board::AnalogIn dccd_i(mcu::ADC0);
-static board::AnalogIn dccd_u(mcu::ADC1);
-static board::AnalogIn bat_u(mcu::ADC2);
-static board::AnalogIn bat_i(mcu::ADC3);
+/**** Private constants ****/
+/**** Private variables ****/
+static bsp::AnalogIn dccd_i(mcu::ADC0);
+static bsp::AnalogIn dccd_u(mcu::ADC1);
+static bsp::AnalogIn bat_u(mcu::ADC2);
+static bsp::AnalogIn bat_i(mcu::ADC3);
+static bsp::Hafbridge hbridge(mcu::PWM0, mcu::GPIO15, 95);
+static bsp::AnalogIn ain1(mcu::ADC5); // mode
+static bsp::AnalogIn ain2(mcu::ADC4); // pot
+static bsp::DigitalIn din1(mcu::GPIO0, 0, bsp::DIN_HIGH); //mode
+static bsp::DigitalIn din2(mcu::GPIO1, 0, bsp::DIN_HIGH); //pot
+static bsp::DigitalIn din3(mcu::GPIO2, 0, bsp::DIN_HIGH); //down
+static bsp::DigitalIn din4(mcu::GPIO3, 0, bsp::DIN_HIGH); //up
+static bsp::DigitalIn hvdin1(mcu::GPIO4, 1, bsp::DIN_LOW); //dimm
+static bsp::DigitalIn hvdin2(mcu::GPIO5, 1, bsp::DIN_LOW); //brakes
+static bsp::DigitalIn hvdin3(mcu::GPIO6, 1, bsp::DIN_LOW); //hbrake
+static bsp::DigitalIO hvdin3_pull(mcu::GPIO7, bsp::DIN_HIGH); //hbrake pull
+static bsp::DigitalOut odout1(mcu::GPIO9,  1);
+static bsp::DigitalOut odout2(mcu::GPIO10, 1);
+static bsp::DigitalOut odout3(mcu::GPIO11, 1);
+static bsp::DigitalOut odout4(mcu::GPIO12, 1);
+static bsp::DigitalOut odout5(mcu::GPIO13, 1);
+static bsp::DigitalOut odout6(mcu::GPIO14, 1);
+static bsp::PWMout od_pwm(mcu::PWM1);
 
-static board::Hafbridge hbridge(mcu::PWM0, mcu::GPIO15, 95);
+static hw::Button btn_mode(&din1, bsp::DIN_LOW, 10, hw::BUTTON_OFF);
+static hw::Button btn_up(&din4, bsp::DIN_LOW, 10, hw::BUTTON_OFF);
+static hw::Button btn_down(&din3, bsp::DIN_LOW, 10, hw::BUTTON_OFF);
 
-static board::AnalogIn ain1(mcu::ADC5); // mode
-static board::AnalogIn ain2(mcu::ADC4); // pot
-
-static board::DigitalIn din1(mcu::GPIO0, 0, board::DIN_HIGH); //mode
-static board::DigitalIn din2(mcu::GPIO1, 0, board::DIN_HIGH); //pot
-static board::DigitalIn din3(mcu::GPIO2, 0, board::DIN_HIGH); //down
-static board::DigitalIn din4(mcu::GPIO3, 0, board::DIN_HIGH); //up
-
-static board::DigitalIn hvdin1(mcu::GPIO4, 1, board::DIN_LOW); //dimm
-static board::DigitalIn hvdin2(mcu::GPIO5, 1, board::DIN_LOW); //brakes
-static board::DigitalIn hvdin3(mcu::GPIO6, 1, board::DIN_LOW); //hbrake
-static board::DigitalIO hvdin3_pull(mcu::GPIO7, board::DIN_HIGH); //hbrake pull
-
-static board::DigitalOut odout1(mcu::GPIO9,  1);
-static board::DigitalOut odout2(mcu::GPIO10, 1);
-static board::DigitalOut odout3(mcu::GPIO11, 1);
-static board::DigitalOut odout4(mcu::GPIO12, 1);
-static board::DigitalOut odout5(mcu::GPIO13, 1);
-static board::DigitalOut odout6(mcu::GPIO14, 1);
-
-static board::PWMout od_pwm(mcu::PWM1);
-
-static hw::Button btn_mode(&din1, board::DIN_LOW, 10, hw::BUTTON_OFF);
-static hw::Button btn_up(&din4, board::DIN_LOW, 10, hw::BUTTON_OFF);
-static hw::Button btn_down(&din3, board::DIN_LOW, 10, hw::BUTTON_OFF);
-
-static hw::Button sw_dimm(&hvdin1, board::DIN_HIGH, 10, hw::BUTTON_OFF);
-static hw::Button sw_brakes(&hvdin2, board::DIN_HIGH, 10, hw::BUTTON_OFF);
-static hw::Button sw_hbrake(&hvdin3, board::DIN_LOW, 10, hw::BUTTON_OFF);
+static hw::Button sw_dimm(&hvdin1, bsp::DIN_HIGH, 10, hw::BUTTON_OFF);
+static hw::Button sw_brakes(&hvdin2, bsp::DIN_HIGH, 10, hw::BUTTON_OFF);
+static hw::Button sw_hbrake(&hvdin3, bsp::DIN_LOW, 10, hw::BUTTON_OFF);
 
 static hw::Potentiometer pot(&ain2, 500, 4500);
 
 static hw::DisplayLed display(&odout1, &odout2, &odout3, &odout4, &odout5, &odout6, &od_pwm);
 
-static hw::CVoutput cvout(&hbridge);
+static hw::CVoutput cvout(&hbridge, &bat_u);
 
-/**** Private constants ****/
-/**** Private variables ****/
 /**** Private function declarations ****/
-static void board_setup(void);
-
 /**** Public function definitions ****/
 int main(void)
 {
-	board_setup();
-
-	cvout.target = 0;
-	cvout.min_out = 500;
-	cvout.enable();
-
 	// Super loop
 	while(1)
 	{				
@@ -83,35 +69,3 @@ int main(void)
 }
 
 /**** Private function definitions ***/
-static void board_setup(void)
-{
-	mcu::startupCfg_t mcu_cfg;
-	mcu_cfg.adc_clk = mcu::ADC_DIV2;
-	mcu_cfg.pwm_clk = mcu::TIM_DIV1;
-	mcu_cfg.pwm_top = 200;
-	mcu_cfg.pwm_ch1_en = 1;
-	
-	mcu::startup(&mcu_cfg);
-	
-	dccd_i.mul = 215;
-	dccd_i.div = 22;
-	dccd_i.offset = 0;
-	dccd_i.last_read = 0;
-	
-	dccd_u.mul = 20;
-	dccd_u.div = 1;
-	dccd_u.offset = 0;
-	dccd_u.last_read = 0;
-	
-	bat_u.mul = 20;
-	bat_u.div = 1;
-	bat_u.offset = 0;
-	bat_u.last_read = 12000;
-	
-	bat_i.mul = 235;
-	bat_i.div = 6;
-	bat_i.offset = 0;
-	bat_i.last_read = 0;
-	
-	od_pwm.write(100);
-}

firmware/src/uDCCD.cppproj

@@ -153,46 +153,46 @@
     </ToolchainSettings>
   </PropertyGroup>
   <ItemGroup>
-    <Compile Include="board\ain.cpp">
+    <Compile Include="bsp\ain.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\ain.h">
+    <Compile Include="bsp\ain.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\din.cpp">
+    <Compile Include="bsp\din.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\din.h">
+    <Compile Include="bsp\din.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\dio.cpp">
+    <Compile Include="bsp\dio.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\dio.h">
+    <Compile Include="bsp\dio.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\halfbridge.cpp">
+    <Compile Include="bsp\halfbridge.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\halfbridge.h">
+    <Compile Include="bsp\halfbridge.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\mcu\mcu_hal.h">
+    <Compile Include="bsp\mcu\mcu_hal.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\mcu\mcu_hal_r8.cpp">
+    <Compile Include="bsp\mcu\mcu_hal_r8.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\dout.cpp">
+    <Compile Include="bsp\dout.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\dout.h">
+    <Compile Include="bsp\dout.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\pwm.cpp">
+    <Compile Include="bsp\pwm.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="board\pwm.h">
+    <Compile Include="bsp\pwm.h">
       <SubType>compile</SubType>
     </Compile>
     <Compile Include="hw\button.cpp">
@@ -236,8 +236,8 @@
     </Compile>
   </ItemGroup>
   <ItemGroup>
-    <Folder Include="board" />
-    <Folder Include="board\mcu" />
+    <Folder Include="bsp" />
+    <Folder Include="bsp\mcu" />
     <Folder Include="hw" />
     <Folder Include="utils" />
   </ItemGroup>