#include "ut_led_display.h"

#include "..\mock_board\mock_board_odout.h"

#include "..\..\src\hw\led_display.h"

static uint8_t NOT_ACCESD_OD_CHANNEL = 255;
static uint8_t NOT_ACCESD_OD_LEVEL = BSP_ODOUT_HIGH;
static uint8_t NOT_ACCESD_PERCENT = 255;

static int ut_led_dsp_set_image(uint8_t image, uint8_t exp_image)
{
    printf("   Input:%x \n", image);

    // Reset image
    mock_board_odout_write_ch(NOT_ACCESD_OD_CHANNEL);
    mock_board_odout_write_data(BSP_OD1,NOT_ACCESD_OD_LEVEL);
    mock_board_odout_write_data(BSP_OD2,NOT_ACCESD_OD_LEVEL);
    mock_board_odout_write_data(BSP_OD3,NOT_ACCESD_OD_LEVEL);
    mock_board_odout_write_data(BSP_OD4,NOT_ACCESD_OD_LEVEL);
    mock_board_odout_write_data(BSP_OD5,NOT_ACCESD_OD_LEVEL);
    mock_board_odout_write_data(BSP_OD6,NOT_ACCESD_OD_LEVEL);

    led_dsp_set_image(image);

    // Read set OD output image
    uint8_t i1 = mock_board_odout_read_data(BSP_OD1);
    uint8_t i2 = mock_board_odout_read_data(BSP_OD2);
    uint8_t i3 = mock_board_odout_read_data(BSP_OD3);
    uint8_t i4 = mock_board_odout_read_data(BSP_OD4);
    uint8_t i5 = mock_board_odout_read_data(BSP_OD5);
    uint8_t i6 = mock_board_odout_read_data(BSP_OD6);

    uint8_t out_image = 0x00;
    if(i1==BSP_ODOUT_LOW) out_image |= 0x01;
    if(i2==BSP_ODOUT_LOW) out_image |= 0x02;
    if(i3==BSP_ODOUT_LOW) out_image |= 0x04;
    if(i4==BSP_ODOUT_LOW) out_image |= 0x08;
    if(i5==BSP_ODOUT_LOW) out_image |= 0x10;
    if(i6==BSP_ODOUT_LOW) out_image |= 0x20;

    printf("  Output:%x \n", out_image);
    printf("Expected:%x \n", exp_image);

    if(out_image==exp_image)
    {
        printf("PASS\n\n");
        return 1;
    }
    else
    {
        printf("FAIL\n\n");
        return 0;
    }
}

int ut_led_dsp_set_image_test(void)
{
    printf("******************************************************\n");
    printf("void led_dsp_set_image(uint8_t image) \n");

    int test_res;
    int pass = 1;

    uint8_t image;
    uint8_t exp_image;

    // Normal 1
    image = 0x00;
    exp_image = 0x00;
    test_res = ut_led_dsp_set_image(image, exp_image);
    if(!test_res) pass = 0;

    // Normal 1
    image = 0x3F;
    exp_image = 0x3F;
    test_res = ut_led_dsp_set_image(image, exp_image);
    if(!test_res) pass = 0;

    // Normal 1
    image = 0xAA;
    exp_image = 0x2A;
    test_res = ut_led_dsp_set_image(image, exp_image);
    if(!test_res) pass = 0;

    // Normal 1
    image = 0x55;
    exp_image = 0x15;
    test_res = ut_led_dsp_set_image(image, exp_image);
    if(!test_res) pass = 0;

    return pass;
}

static int ut_led_dsp_backligth_set(uint8_t percent, uint8_t exp_percent)
{
    printf("   Input:%d \n", percent);

    // Reset image
    mock_board_odout_write_pwm(NOT_ACCESD_PERCENT);

    led_dsp_backligth_set(percent);

    // Read set OD output image
    uint8_t pwm = mock_board_odout_read_pwm();

    printf("  Output:%d \n", pwm);
    printf("Expected:%d \n", exp_percent);

    if(pwm==exp_percent)
    {
        printf("PASS\n\n");
        return 1;
    }
    else
    {
        printf("FAIL\n\n");
        return 0;
    }
}

int ut_led_dsp_backligth_set_test(void)
{
    printf("******************************************************\n");
    printf("void led_dsp_backligth_set(uint8_t percent) \n");

    int test_res;
    int pass = 1;

    uint8_t percent;
    uint8_t exp_percent;

    // Normal 1
    percent = 0;
    exp_percent = 0;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    // Normal 1
    percent = 25;
    exp_percent = 25;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    // Normal 1
    percent = 50;
    exp_percent = 50;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    // Normal 1
    percent = 75;
    exp_percent = 75;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    // Normal 1
    percent = 100;
    exp_percent = 100;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    // Normal 1
    percent = 200;
    exp_percent = 200;
    test_res = ut_led_dsp_backligth_set(percent, exp_percent);
    if(!test_res) pass = 0;

    return pass;
}