saved work

firmware/src/board/ain.cpp

@@ -0,0 +1,35 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "ain.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::AnalogIn::AnalogIn(uint8_t adc_ch)
+{
+	this->adc_ch = adc_ch;
+	this->mul = DEF_AIN_MUL;
+	this->div = DEF_AIN_DIV;
+	this->offset = DEF_AIN_OFFSET;
+	this->last_read = 0;
+}
+
+uint16_t board::AnalogIn::read(void)
+{
+	//Read ADC
+	uint16_t raw = mcu::adc_read(this->adc_ch);
+	
+	//Convert to mV
+	this->last_read = util::convert_muldivoff(raw, this->mul, this->div, this->offset);
+	
+	return this->last_read;
+}
+
+/**** Private function definitions ****/
+

firmware/src/board/ain.h

@@ -0,0 +1,37 @@
+#ifndef ANALOG_IN_H_
+#define ANALOG_IN_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace board {
+
+/**** Public definitions ****/
+static const uint8_t DEF_AIN_MUL = 215;
+static const uint8_t DEF_AIN_DIV = 44;
+static const int16_t DEF_AIN_OFFSET = 0;
+
+class AnalogIn
+{
+	protected:
+	uint8_t adc_ch;
+	
+	public:
+	AnalogIn(uint8_t adc_ch);
+	
+	uint8_t mul;
+	uint8_t div;
+	int16_t offset;
+	uint16_t last_read;
+	
+	uint16_t read(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* ANALOG_IN_H_ */

firmware/src/board/din.cpp

@@ -0,0 +1,40 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "din.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::DigitalIn::DigitalIn(uint8_t gpio_ch, uint8_t inverted, uint8_t init_value)
+{
+	this->gpio_ch = gpio_ch;
+	this->invert = inverted;
+	
+	if(init_value) this->last_read = DIN_HIGH;
+	else this->last_read = DIN_LOW;
+}
+
+board::DigitalIn::~DigitalIn(void)
+{
+	return;
+}
+
+uint8_t board::DigitalIn::read(void)
+{
+	uint8_t lvl = mcu::gpio_read(this->gpio_ch);
+	
+	if(this->invert) lvl = util::invert(lvl);
+	
+	if(lvl>0) this->last_read = DIN_HIGH;
+	else this->last_read = DIN_LOW;
+	
+	return this->last_read;
+}
+
+/**** Private function definitions ****/

firmware/src/board/din.h

@@ -0,0 +1,35 @@
+#ifndef DIGITAL_INPUT_H_
+#define DIGITAL_INPUT_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace board {
+
+/**** Public definitions ****/
+const uint8_t DIN_LOW  = 0;
+const uint8_t DIN_HIGH = 1;
+
+class DigitalIn
+{
+	protected:
+	uint8_t gpio_ch;
+	uint8_t invert;
+	
+	public:
+	DigitalIn(uint8_t gpio_ch, uint8_t inverted, uint8_t init_value);
+	~DigitalIn(void);
+	
+	uint8_t last_read;
+	
+	uint8_t read(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* DIGITAL_INPUT_H_ */

firmware/src/board/dio.cpp

@@ -0,0 +1,34 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "dio.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::DigitalIO::DigitalIO(uint8_t gpio_ch, uint8_t init_value) : DigitalIn(gpio_ch, 0, init_value), DigitalOut(gpio_ch, 0)
+{
+	return;
+}
+
+board::DigitalIO::~DigitalIO(void)
+{
+	this->write(DOUT_HIZ);
+}
+
+uint8_t board::DigitalIO::is_io_match(void)
+{
+	if(this->last_set == DOUT_HIZ) return 1;
+	
+	uint8_t read_lvl = this->read();
+	
+	if(read_lvl == (uint8_t)this->last_set) return 1;
+	else return 0;
+}
+
+/**** Private function definitions ****/

firmware/src/board/dio.h

@@ -0,0 +1,32 @@
+#ifndef DIGITAL_IO_H_
+#define DIGITAL_IO_H_
+
+/**** Includes ****/
+#include <stdint.h>
+#include "din.h"
+#include "dout.h"
+
+namespace board {
+
+/**** Public definitions ****/
+const int8_t DIO_LOW  = 0;
+const int8_t DIO_HIGH = 1;
+const int8_t DIO_HIZ   = -1;
+
+class DigitalIO : public DigitalIn, public DigitalOut
+{
+	public:
+	DigitalIO(uint8_t gpio_ch, uint8_t init_value);
+	~DigitalIO(void);
+	
+	uint8_t is_io_match(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* DIGITAL_IO_H_ */

firmware/src/board/dout.cpp

@@ -0,0 +1,52 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "dout.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::DigitalOut::DigitalOut(uint8_t gpio_ch, uint8_t inverted)
+{
+	this->gpio_ch = gpio_ch;
+	this->invert = inverted;
+	this->write(DOUT_HIZ);
+}
+
+board::DigitalOut::~DigitalOut(void)
+{
+	this->write(DOUT_HIZ);
+}
+
+void board::DigitalOut::write(int8_t level)
+{
+	if(level > 0)
+	{
+		this->last_set = DOUT_HIGH;
+		if(this->invert) mcu::gpio_write(this->gpio_ch, mcu::LEVEL_LOW);
+		else mcu::gpio_write(this->gpio_ch, mcu::LEVEL_HIGH);
+	}
+	else if(level == 0)
+	{
+		this->last_set = DOUT_LOW;
+		if(this->invert) mcu::gpio_write(this->gpio_ch, mcu::LEVEL_HIGH);
+		else mcu::gpio_write(this->gpio_ch, mcu::LEVEL_LOW);
+	}
+	else
+	{
+		this->last_set = DOUT_HIZ;
+		mcu::gpio_write(this->gpio_ch, mcu::LEVEL_HIZ);
+	}
+}
+
+int8_t board::DigitalOut::get_set_level(void)
+{
+	return this->last_set;
+}
+
+/**** Private function definitions ****/

firmware/src/board/dout.h

@@ -0,0 +1,36 @@
+#ifndef DIGITAL_OUTPUT_H_
+#define DIGITAL_OUTPUT_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace board {
+
+/**** Public definitions ****/
+const int8_t DOUT_LOW  = 0;
+const int8_t DOUT_HIGH = 1;
+const int8_t DOUT_HIZ = -1;
+
+class DigitalOut
+{
+	protected:
+	uint8_t gpio_ch;
+	uint8_t invert;
+	int8_t last_set;
+	
+	public:
+	DigitalOut(uint8_t gpio_ch, uint8_t inverted);
+	~DigitalOut(void);
+	
+	void write(int8_t level);
+	int8_t get_set_level(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* DIGITAL_OUTPUT_H_ */

firmware/src/board/halfbridge.cpp

@@ -0,0 +1,68 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "halfbridge.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::Hafbridge::Hafbridge(uint8_t hs_pwm_ch, uint8_t ls_gpio_ch, uint8_t max_dc)
+{
+	this->pwm_ch  = hs_pwm_ch;	
+	this->gpio_ch = ls_gpio_ch;
+	
+	if(max_dc>100) this->max_dc = 100;
+	else this->max_dc = max_dc;
+	this->disable();
+}
+
+board::Hafbridge::~Hafbridge(void)
+{
+	this->last_duty = 0;
+	this->disable();
+}
+
+void board::Hafbridge::write(uint8_t duty)
+{
+	// Limit duty
+	if(duty > this->max_dc) duty = this->max_dc;
+	this->last_duty = duty;
+	
+	if(this->enabled == 0) return;
+	
+	// Convert percent to 16b duty cycle
+	uint16_t dc = util::percent_to_16b(duty);
+	// Set PWM
+	mcu::pwm_write(this->pwm_ch, dc);
+}
+
+void board::Hafbridge::enable(void)
+{
+	mcu::gpio_write(this->gpio_ch, mcu::LEVEL_HIGH);
+	this->enabled = 1;
+	this->write(this->last_duty);
+}
+
+void board::Hafbridge::disable(void)
+{
+	mcu::pwm_write(this->pwm_ch, 0);
+	mcu::gpio_write(this->gpio_ch, mcu::LEVEL_LOW);
+	this->enabled = 0;
+}
+
+uint8_t board::Hafbridge::get_set_duty(void)
+{
+	return this->last_duty;
+}
+
+uint8_t board::Hafbridge::is_enabled(void)
+{
+	return this->enabled;
+}
+
+/**** Private function definitions ****/

firmware/src/board/halfbridge.h

@@ -0,0 +1,37 @@
+#ifndef HALFBRIDGE_H_
+#define HALFBRIDGE_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace board {
+
+/**** Public definitions ****/
+class Hafbridge
+{
+	protected:
+	uint8_t pwm_ch;
+	uint8_t gpio_ch;
+	uint8_t last_duty;
+	uint8_t enabled;
+	uint8_t max_dc;
+	
+	public:
+	Hafbridge(uint8_t hs_pwm_ch, uint8_t ls_gpio_ch, uint8_t max_dc);
+	~Hafbridge(void);
+	
+	void write(uint8_t duty);
+	void enable(void);
+	void disable(void);
+	uint8_t get_set_duty(void);
+	uint8_t is_enabled(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* HALFBRIDGE_H_ */

firmware/src/board/mcu/mcu_hal.h

@@ -0,0 +1,125 @@
+#ifndef MCU_HAL_H_
+#define MCU_HAL_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace mcu {
+
+/**** Public definitions ****/
+/*
+GPIO0	Down
+GPIO1	Up
+GPIO2	Mode
+GPIO3	Handbrake
+GPIO4	Brakes
+GPIO5	Dimm
+GPIO6	LED0
+GPIO7	LED1
+GPIO8	LED2
+GPIO9	LED3
+GPIO10	LED4
+GPIO11	LED5
+GPIO12	DCCD Enable
+GPIO13	Handbrake pull
+GPIO14	Speed pull
+GPIO15	DCCD PWM
+GPIO16	LED PWM
+
+ADC0	Output current
+ADC1	Output voltage
+ADC2	Battery current
+ADC3	Battery voltage
+ADC4	Potentiometer
+ADC5	Mode
+ADC8	MCU temperature
+ADC14	MCU internal reference
+ADC15	MCU ground
+*/
+
+const uint8_t GPIO0 = 0;	//PC5 Mode
+const uint8_t GPIO1 = 1;	//PC4 Pot  
+const uint8_t GPIO2 = 2;	//PE1 Down
+const uint8_t GPIO3 = 3;	//PE3 Up
+const uint8_t GPIO4 = 4;	//PD7 Dimm
+const uint8_t GPIO5 = 5;	//PB7 Brakes
+const uint8_t GPIO6 = 6;	//PB6 Handbrake
+const uint8_t GPIO7 = 7;	//PB5 Handbrake pull
+const uint8_t GPIO8 = 8;	//PD6 Speed pull
+const uint8_t GPIO9 = 9;	//PD0 LED0
+const uint8_t GPIO10 = 10;	//PD1 LED1
+const uint8_t GPIO11 = 11;	//PD2 LED2
+const uint8_t GPIO12 = 12;	//PD3 LED3
+const uint8_t GPIO13 = 13;	//PD4 LED4
+const uint8_t GPIO14 = 14;	//PD5 LED5
+const uint8_t GPIO15 = 15;	//PB0 DCCD Enable
+const uint8_t GPIO16 = 16;	//PB1 DCCD PWM
+const uint8_t GPIO17 = 17;	//PB2 LED PWM
+
+const uint8_t LEVEL_LOW  = 0;
+const uint8_t LEVEL_HIGH = 1;
+const int8_t LEVEL_HIZ   = -1;
+
+const uint8_t ADC0 = 0;	//Output current
+const uint8_t ADC1 = 1;	//Output voltage
+const uint8_t ADC2 = 2;	//Battery voltage
+const uint8_t ADC3 = 3;	//Battery current
+const uint8_t ADC4 = 4;	//Potentiometer
+const uint8_t ADC5 = 5;	//Mode
+const uint8_t ADC8 = 8;	//MCU temperature
+const uint8_t ADC14 = 14;	//MCU internal reference
+const uint8_t ADC15 = 15;	//MCU ground
+
+const uint8_t PWM0 = 0;	//DCCD
+const uint8_t PWM1 = 1;	//LED
+
+//ADC definitions
+typedef enum {
+	ADC_DIV2 = 0x01,
+	ADC_DIV4 = 0x02,
+	ADC_DIV8 = 0x03,
+	ADC_DIV16 = 0x04,
+	ADC_DIV32 = 0x05,
+	ADC_DIV64 = 0x06,
+	ADC_DIV128 = 0x07
+} adcClkDiv_t;
+
+//Timer definitions
+typedef enum {
+	TIM_DIV1 = 0x01,
+	TIM_DIV8 = 0x02,
+	TIM_DIV64 = 0x03,
+	TIM_DIV256 = 0x04,
+	TIM_DIV1024 = 0x05
+} timerClkDiv_t;
+
+typedef struct {
+	adcClkDiv_t adc_clk;
+	timerClkDiv_t pwm_clk;
+	uint16_t pwm_top;
+	uint8_t pwm_ch1_en;
+} startupCfg_t;
+
+/**** Public function declarations ****/
+void startup(startupCfg_t* hwCfg);
+
+uint8_t gpio_read(uint8_t ch);
+void gpio_write(uint8_t ch, int8_t lvl);
+void gpio_write_pull(uint8_t ch, int8_t lvl);
+
+uint16_t adc_read(uint8_t ch);
+
+void pwm_write(uint8_t ch, uint16_t dc);
+uint16_t pwm_read(uint8_t ch);
+
+uint8_t eeprom_read8b(uint16_t address);
+uint16_t eeprom_read16b(uint16_t address);
+uint32_t eeprom_read32b(uint16_t address);
+
+void eeprom_write8b(uint16_t address, uint8_t value);
+void eeprom_write16b(uint16_t address, uint16_t value);
+void eeprom_write32b(uint16_t address, uint32_t value);
+
+} //namespace
+
+#endif /* MCU_HAL_H_ */

firmware/src/board/mcu/mcu_hal_r8.cpp

@@ -3,16 +3,18 @@
 #include <avr/eeprom.h>
 #include "mcu_hal.h"
 
+using namespace mcu;
+
 /**** Private definitions ****/
 /**** Private constants ****/
 /**** Private variables ****/
 /**** Private function declarations ****/
-static uint8_t gpio_read(uint8_t pin_reg, uint8_t mask);
+static uint8_t gpio_read_level(uint8_t pin_reg, uint8_t mask);
 static void pwm_write_ocx(uint8_t ch, uint16_t value);
 static uint16_t pwm_read_ocx(uint8_t ch);
 
 /**** Public function definitions ****/
-void mcu_startup(startupCfg_t* hwCfg)
+void mcu::startup(startupCfg_t* hwCfg)
 {
 	// Fail-safe GPIO init
 	PORTB = 0xF8;  // Set PORTB pull-ups
@@ -32,7 +34,7 @@ void mcu_startup(startupCfg_t* hwCfg)
 	DDRB |= 0x03;   //Set as output
 	
 	// Common OD PWM pin
-	if(hwCfg->pwm_chb_en) PORTB &= ~0x04; //Set low
+	if(hwCfg->pwm_ch1_en) PORTB &= ~0x04; //Set low
 	else PORTB |= 0x04;                   //Set high
 	DDRB |= 0x04;                         //Set as output
 	
@@ -78,7 +80,7 @@ void mcu_startup(startupCfg_t* hwCfg)
 	//DCCD and LED PWM configuration
 	PRR0 &= ~0x80;  //Enable Timer1 power
 	TCCR1A = 0xC2; //Connect OC1A, inverted mode
-	if(hwCfg->pwm_chb_en) TCCR1A |= 0x30; //Connect OC1B, inverted mode
+	if(hwCfg->pwm_ch1_en) TCCR1A |= 0x30; //Connect OC1B, inverted mode
 	TCCR1B = 0x18; //PWM, Phase & Frequency Correct ICR1 top, no clock, WGM:0xE
 	TCCR1C = 0x00;
 	TCNT1 = 0x0000;
@@ -93,7 +95,7 @@ void mcu_startup(startupCfg_t* hwCfg)
 }
 
 // ADC Interface functions 
-uint16_t mcu_adc_read(uint8_t ch)
+uint16_t mcu::adc_read(uint8_t ch)
 {
 	//check if ADC is enabled
 	if(!(ADCSRA&0x80)) return 0xFFFF;
@@ -111,7 +113,7 @@ uint16_t mcu_adc_read(uint8_t ch)
 }
 
 // PWM Timer Interface functions
-void mcu_pwm_write(uint8_t ch, uint16_t dc)
+void mcu::pwm_write(uint8_t ch, uint16_t dc)
 {
 	dc = 0xFFFF - dc;
 	
@@ -128,7 +130,7 @@ void mcu_pwm_write(uint8_t ch, uint16_t dc)
 	pwm_write_ocx(ch, ocrx);
 }
 
-uint16_t mcu_pwm_read(uint8_t ch)
+uint16_t mcu::pwm_read(uint8_t ch)
 {
 	uint16_t ocrx = pwm_read_ocx(ch);
 	
@@ -146,74 +148,74 @@ uint16_t mcu_pwm_read(uint8_t ch)
 	return (uint16_t)temp;
 }
 
-uint8_t mcu_gpio_read(uint8_t ch)
+uint8_t mcu::gpio_read(uint8_t ch)
 {
 	switch(ch)
 	{
-		case MCU_GPIO0:  // Mode DIN1
-		return gpio_read(PINC,0x20);
+		case GPIO0:  // Mode DIN1
+		return gpio_read_level(PINC,0x20);
 		
-		case MCU_GPIO1:  // Pot DIN2
-		return gpio_read(PINC,0x10);
+		case GPIO1:  // Pot DIN2
+		return gpio_read_level(PINC,0x10);
 		
-		case MCU_GPIO2:  // Down DIN3
-		return gpio_read(PINE,0x02);
+		case GPIO2:  // Down DIN3
+		return gpio_read_level(PINE,0x02);
 		
-		case MCU_GPIO3:  // Up DIN4
-		return gpio_read(PINE,0x08);
+		case GPIO3:  // Up DIN4
+		return gpio_read_level(PINE,0x08);
 		
-		case MCU_GPIO4:  // Dimm DIN5
-		return gpio_read(PIND,0x80);
+		case GPIO4:  // Dimm DIN5
+		return gpio_read_level(PIND,0x80);
 		
-		case MCU_GPIO5:  // Brakes DIN6
-		return gpio_read(PINB,0x80);
+		case GPIO5:  // Brakes DIN6
+		return gpio_read_level(PINB,0x80);
 		
-		case MCU_GPIO6:  // Handbrake DIN7
-		return gpio_read(PINB,0x40);
+		case GPIO6:  // Handbrake DIN7
+		return gpio_read_level(PINB,0x40);
 		
-		case MCU_GPIO7:  // Handbrake pull DIN8
-		return gpio_read(PINB,0x20);
+		case GPIO7:  // Handbrake pull DIN8
+		return gpio_read_level(PINB,0x20);
 		
-		case MCU_GPIO8:  // Speed-pull
-		return gpio_read(PIND,0x40);
+		case GPIO8:  // Speed-pull
+		return gpio_read_level(PIND,0x40);
 		
-		case MCU_GPIO9:  // LED 0
-		return gpio_read(PIND,0x01);
+		case GPIO9:  // LED 0
+		return gpio_read_level(PIND,0x01);
 		
-		case MCU_GPIO10:  // LED 1
-		return gpio_read(PIND,0x02);
+		case GPIO10:  // LED 1
+		return gpio_read_level(PIND,0x02);
 		
-		case MCU_GPIO11:  // LED 2
-		return gpio_read(PIND,0x04);
+		case GPIO11:  // LED 2
+		return gpio_read_level(PIND,0x04);
 		
-		case MCU_GPIO12:  // LED 3
-		return gpio_read(PIND,0x08);
+		case GPIO12:  // LED 3
+		return gpio_read_level(PIND,0x08);
 		
-		case MCU_GPIO13:  // LED 4
-		return gpio_read(PIND,0x10);
+		case GPIO13:  // LED 4
+		return gpio_read_level(PIND,0x10);
 		
-		case MCU_GPIO14:  // LED 5
-		return gpio_read(PIND,0x20);
+		case GPIO14:  // LED 5
+		return gpio_read_level(PIND,0x20);
 		
-		case MCU_GPIO15:  // DCCD Enable
-		return gpio_read(PINB,0x01);	
+		case GPIO15:  // DCCD Enable
+		return gpio_read_level(PINB,0x01);	
 		
-		case MCU_GPIO16:  // DCCD PWM
-		return gpio_read(PINB,0x02);
+		case GPIO16:  // DCCD PWM
+		return gpio_read_level(PINB,0x02);
 		
-		case MCU_GPIO17:  // LED PWM
-		return gpio_read(PINB,0x04);	
+		case GPIO17:  // LED PWM
+		return gpio_read_level(PINB,0x04);	
 		
 		default:
 		return 0;
 	}
 }
 
-void mcu_gpio_write(uint8_t ch, int8_t lvl)
+void mcu::gpio_write(uint8_t ch, int8_t lvl)
 {
 	switch(ch)
 	{		
-		case MCU_GPIO0:  // Mode DIN1
+		case GPIO0:  // Mode DIN1
 		if(lvl>0)
 		{
 			PORTC |= 0x20;
@@ -231,7 +233,7 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 		}
 		return;
 		
-		case MCU_GPIO1:  // Pot DIN2
+		case GPIO1:  // Pot DIN2
 		if(lvl>0)
 		{
 			PORTC |= 0x10;
@@ -249,7 +251,7 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 		}
 		return;
 		
-		case MCU_GPIO2:  // Down DIN3
+		case GPIO2:  // Down DIN3
 		if(lvl>0)
 		{
 			PORTE |= 0x02;
@@ -267,7 +269,7 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 		}
 		return;
 		
-		case MCU_GPIO3:  // Up DIN4
+		case GPIO3:  // Up DIN4
 		if(lvl>0)
 		{
 			PORTE |= 0x08;
@@ -285,7 +287,7 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 		}
 		return;
 		
-		case MCU_GPIO7:  // Handbrake pull DIN
+		case GPIO7:  // Handbrake pull DIN
 		if(lvl>0)
 		{
 			PORTB |= 0x20;
@@ -303,42 +305,42 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 		}
 		return;
 		
-		case MCU_GPIO8:  // Speed-pull
+		case GPIO8:  // Speed-pull
 		if(lvl>0) PORTD |= 0x40;
 		else PORTD &= ~0x40;
 		return;
 		
-		case MCU_GPIO9:  // LED 0
+		case GPIO9:  // LED 0
 		if(lvl>0) PORTD |= 0x01;
 		else PORTD &= ~0x01;
 		return;
 		
-		case MCU_GPIO10:  // LED 1
+		case GPIO10:  // LED 1
 		if(lvl>0) PORTD |= 0x02;
 		else PORTD &= ~0x02;
 		return;
 		
-		case MCU_GPIO11:  // LED 2
+		case GPIO11:  // LED 2
 		if(lvl>0) PORTD |= 0x04;
 		else PORTD &= ~0x04;
 		return;
 		
-		case MCU_GPIO12:  // LED 3
+		case GPIO12:  // LED 3
 		if(lvl>0) PORTD |= 0x08;
 		else PORTD &= ~0x08;
 		return;
 		
-		case MCU_GPIO13:  // LED 4
+		case GPIO13:  // LED 4
 		if(lvl>0) PORTD |= 0x10;
 		else PORTD &= ~0x10;
 		return;
 		
-		case MCU_GPIO14:  // LED 5
+		case GPIO14:  // LED 5
 		if(lvl>0) PORTD |= 0x20;
 		else PORTD &= ~0x20;
 		return;
 		
-		case MCU_GPIO15:  // DCCD Enable
+		case GPIO15:  // DCCD Enable
 		if(lvl>0) PORTB |= 0x01;
 		else PORTB &= ~0x01;
 		return;
@@ -348,52 +350,96 @@ void mcu_gpio_write(uint8_t ch, int8_t lvl)
 	}
 }
 
-uint8_t mcu_ee_read8b(uint16_t address)
+void mcu::gpio_write_pull(uint8_t ch, int8_t lvl)
+{
+	switch(ch)
+	{
+		case GPIO0:  // Mode DIN1
+		if(lvl>0) PORTC |= 0x20;
+		else PORTC &= ~0x20;
+		return;
+		
+		case GPIO1:  // Pot DIN2
+		if(lvl>0) PORTC |= 0x10;
+		else PORTC &= ~0x10;
+		return;
+		
+		case GPIO2:  // Down DIN3
+		if(lvl>0) PORTE |= 0x02;
+		else PORTE &= ~0x02;
+		return;
+		
+		case GPIO3:  // Up DIN4
+		if(lvl>0) PORTE |= 0x08;
+		else PORTE &= ~0x08;
+		return;
+		
+		case GPIO4:  // Dimm
+		if(lvl>0) PORTD |= 0x80;
+		else PORTD &= ~0x80;
+		return;
+		
+		case GPIO5:  // Brakes
+		if(lvl>0) PORTB |= 0x80;
+		else PORTB &= ~0x80;
+		return;
+		
+		case GPIO6:  // Handbrake
+		if(lvl>0) PORTB |= 0x40;
+		else PORTB &= ~0x40;
+		return;
+		
+		default:
+		return;
+	}
+}
+
+uint8_t mcu::eeprom_read8b(uint16_t address)
 {
 	return eeprom_read_byte((uint8_t*)address);
 }
 
-uint16_t mcu_ee_read16b(uint16_t address)
+uint16_t mcu::eeprom_read16b(uint16_t address)
 {
 	return eeprom_read_word((uint16_t*)address);
 }
 
-uint32_t mcu_ee_read32b(uint16_t address)
+uint32_t mcu::eeprom_read32b(uint16_t address)
 {
 	return eeprom_read_dword((uint32_t*)address);
 }
 
-void mcu_ee_write8b(uint16_t address, uint8_t value)
+void mcu::eeprom_write8b(uint16_t address, uint8_t value)
 {
 	eeprom_write_byte((uint8_t*)address, value);
 }
 
-void mcu_ee_write16b(uint16_t address, uint16_t value)
+void mcu::eeprom_write16b(uint16_t address, uint16_t value)
 {
 	eeprom_write_word((uint16_t*)address, value);
 }
 
-void mcu_ee_write32b(uint16_t address, uint32_t value)
+void mcu::eeprom_write32b(uint16_t address, uint32_t value)
 {
 	eeprom_write_dword((uint32_t*)address, value);
 }
 
 /**** Private function definitions ****/
-static uint8_t gpio_read(uint8_t pin_reg, uint8_t mask)
+static uint8_t gpio_read_level(uint8_t pin_reg, uint8_t mask)
 {
-	if(pin_reg&mask) return MCU_GPIO_HIGH;
-	else return MCU_GPIO_LOW;
+	if(pin_reg&mask) return LEVEL_HIGH;
+	else return LEVEL_LOW;
 }
 
 static void pwm_write_ocx(uint8_t ch, uint16_t value)
 {
 	switch(ch)
 	{
-		case MCU_PWM0:
+		case PWM0:
 		OCR1A = value;
 		return;
 		
-		case MCU_PWM1:
+		case PWM1:
 		OCR1B = value;
 		return;
 		
@@ -406,13 +452,13 @@ static uint16_t pwm_read_ocx(uint8_t ch)
 {
 	switch(ch)
 	{
-		case MCU_PWM0:
+		case PWM0:
 		return OCR1A;
 		
-		case MCU_PWM1:
+		case PWM1:
 		return OCR1B ;
 		
 		default:
 		return 0x0000;
 	}
-}
+}

firmware/src/board/pwm.cpp

@@ -0,0 +1,40 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "mcu/mcu_hal.h"
+#include "pwm.h"
+
+using namespace board;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+board::PWMout::PWMout(uint8_t pwm_ch)
+{
+	this->pwm_ch = pwm_ch;
+	this->write(0);
+}
+
+board::PWMout::~PWMout(void)
+{
+	this->write(0);
+}
+
+void board::PWMout::write(uint8_t duty)
+{
+	// Convert percent to 16b duty cycle
+	uint16_t dc = util::percent_to_16b(duty);
+	
+	// Set PWM
+	mcu::pwm_write(this->pwm_ch, dc);
+	this->last_duty = duty;
+}
+
+uint8_t board::PWMout::get_set_duty(void)
+{
+	return this->last_duty;
+}
+
+/**** Private function definitions ****/

firmware/src/board/pwm.h

@@ -0,0 +1,31 @@
+#ifndef PWM_H_
+#define PWM_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace board {
+
+/**** Public definitions ****/
+class PWMout
+{
+	protected:
+	uint8_t pwm_ch;
+	uint8_t last_duty;
+	
+	public:
+	PWMout(uint8_t pwm_ch);
+	~PWMout(void);
+	
+	void write(uint8_t duty);
+	uint8_t get_set_duty(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* PWM_H_ */

firmware/src/board/udccd_board.h

@@ -0,0 +1,44 @@
+#ifndef UDCCD_BOARD_H_
+#define UDCCD_BOARD_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+using namespace board;
+
+/**** Public definitions ****/
+static AnalogIn dccd_i(mcu::ADC0);
+static AnalogIn dccd_u(mcu::ADC1);
+static AnalogIn bat_u(mcu::ADC2);
+static AnalogIn bat_i(mcu::ADC3);
+
+static Hafbridge hbridge(mcu::PWM0, mcu::GPIO15, 95);
+
+static AnalogIn ain1(mcu::ADC5);
+static AnalogIn ain2(mcu::ADC4);
+
+static DigitalIn din1(mcu::GPIO0, 0, board::DIN_HIGH);
+static DigitalIn din2(mcu::GPIO1, 0, board::DIN_HIGH);
+static DigitalIn din3(mcu::GPIO2, 0, board::DIN_HIGH);
+static DigitalIn din4(mcu::GPIO3, 0, board::DIN_HIGH);
+
+static DigitalIn hvdin1(mcu::GPIO4, 1, board::DIN_LOW);
+static DigitalIn hvdin2(mcu::GPIO5, 1, board::DIN_LOW);
+static DigitalIn hvdin3(mcu::GPIO6, 1, board::DIN_LOW); 
+static DigitalIO hvdin3_pull(mcu::GPIO3, board::DIN_HIGH);
+	
+static DigitalOut odout1(mcu::GPIO9,  1);
+static DigitalOut odout2(mcu::GPIO10, 1);
+static DigitalOut odout3(mcu::GPIO11, 1);
+static DigitalOut odout4(mcu::GPIO12, 1);
+static DigitalOut odout5(mcu::GPIO13, 1);
+static DigitalOut odout6(mcu::GPIO14, 1);
+	
+static PWMout od_pwm(mcu::PWM1);
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+#endif /* UDCCD_BOARD_H_ */

firmware/src/hw/analog.c

@@ -1,45 +0,0 @@
-/**** Includes ****/
-#include "board/utils/utils.h"
-#include "board/ain.h"
-#include "analog.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t ain_mapping(uint8_t analog_ch,  uint8_t* ain_ch);
-
-/**** Public function definitions ****/
-uint16_t analog_ch_get(uint8_t analog_ch)
-{
-	uint8_t ain_ch;
-	// Get channel config
-	if(ain_mapping(analog_ch, &ain_ch)) return 0;
-	
-	// Read input as mV
-	uint16_t ch_mv = bsp_ain_read(ain_ch);
-	
-	// Return result
-	return ch_mv;
-}
-
-/**** Private function definitions ****/
-static uint8_t ain_mapping(uint8_t analog_ch,  uint8_t* ain_ch)
-{
-	switch(analog_ch)
-	{
-		case ANALOG_1: // Pot
-		*ain_ch = BSP_AIN2;
-		return 0;
-		
-		case ANALOG_2: // Mode
-		*ain_ch = BSP_AIN1;
-		return 0;
-		
-		default: //Invalid channel
-		*ain_ch = BSP_AIN5;
-		return 1;
-	}
-	
-	return 1;
-}

firmware/src/hw/analog.h

@@ -1,20 +0,0 @@
-#ifndef ANALOG_H_
-#define ANALOG_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define ANALOG_1	1  //Potentiometer
-#define ANALOG_2	2  //Mode
-
-/**** Public function declarations ****/
-uint16_t analog_ch_get(uint8_t analog_ch);
-
-#ifdef TESTING
-#endif
-
-#endif /* ANALOG_H_ */

firmware/src/hw/board/ain.c

@@ -1,77 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "ain.h"
-
-/**** Private definitions ****/
-typedef struct {
-	uint8_t adc_ch;
-	uint8_t mul;
-	uint8_t div;
-	int16_t offset;
-} ainchcfg_t;
-
-/**** Private constants ****/
-static const uint8_t MV_MUL = BSP_AIN_DEF_MV_MUL;
-static const uint8_t MV_DIV = BSP_AIN_DEF_MV_DIV;
-static const int16_t MV_OFFSET = BSP_AIN_DEF_MV_OFFSET;
-
-/**** Private variables ****/
-
-/**** Private function declarations ****/
-static uint8_t ain_mapping(uint8_t ain_ch, ainchcfg_t* ain_ch_cfg);
-
-/**** Public function definitions ****/
-uint16_t bsp_ain_read(uint8_t ch)
-{
-	ainchcfg_t cfg;
-	// Get analog input config, and check validity
-	if(ain_mapping(ch, &cfg)) return 0;
-	
-	//Read ADC
-	uint16_t raw = mcu_adc_read(cfg.adc_ch);
-	
-	//Convert to mV
-	raw = util_convert_muldivoff(raw, cfg.mul, cfg.div, cfg.offset);
-	
-	// Return result
-	return raw;
-}
-
-/**** Private function definitions ****/
-static uint8_t ain_mapping(uint8_t ain_ch, ainchcfg_t* ain_ch_cfg)
-{
-	// Default 10bit ADC with 5V reference to mV conversion
-	ain_ch_cfg->mul = MV_MUL;
-	ain_ch_cfg->div = MV_DIV;
-	ain_ch_cfg->offset = MV_OFFSET;
-	
-	switch(ain_ch)
-	{
-		case BSP_AIN1: // Mode
-		ain_ch_cfg->adc_ch = MCU_ADC5;
-		return 0;
-		
-		case BSP_AIN2: // Pot
-		ain_ch_cfg->adc_ch = MCU_ADC4;
-		return 0;;
-		
-		case BSP_AIN3: // MCU Temp
-		ain_ch_cfg->adc_ch = MCU_ADC8;
-		return 0;
-		
-		case BSP_AIN4: // MCU Internal reference
-		ain_ch_cfg->adc_ch = MCU_ADC14;
-		return 0;
-		
-		case BSP_AIN5: // MCU Ground
-		ain_ch_cfg->adc_ch = MCU_ADC15;
-		return 0;
-		
-		default: // Invalid channel
-		ain_ch_cfg->adc_ch = MCU_ADC15;
-		return 1;
-	}
-	
-	return 1;
-}

firmware/src/hw/board/ain.h

@@ -1,26 +0,0 @@
-#ifndef AIN_H_
-#define AIN_H_
-
-/*
-AIN1	MODE
-AIN2	POT
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-#include "config.h"
-
-/**** Public definitions ****/
-#define BSP_AIN1	1  // Mode
-#define BSP_AIN2	2  // Pot
-#define BSP_AIN3	3  // MCU Temp
-#define BSP_AIN4	4  // MCU Internal reference
-#define BSP_AIN5	5  // MCU Ground
-
-/**** Public function declarations ****/
-uint16_t bsp_ain_read(uint8_t ch);
-
-#ifdef TESTING
-#endif
-
-#endif /* AIN_H_ */

firmware/src/hw/board/config.h

@@ -1,32 +0,0 @@
-#ifndef BSP_CONFIG_H_
-#define BSP_CONFIG_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define BSP_AIN_DEF_MV_MUL		215
-#define BSP_AIN_DEF_MV_DIV		44
-#define BSP_AIN_DEF_MV_OFFSET	0
-
-#define BSP_HB_MV_MUL		BSP_AIN_DEF_MV_MUL
-#define BSP_HB_MV_DIV		BSP_AIN_DEF_MV_DIV
-#define BSP_HB_MV_OFFSET	BSP_AIN_DEF_MV_OFFSET
-
-#define BSP_HB_UDIV_MUL		20
-#define BSP_HB_UDIV_DIV		1
-#define BSP_HB_UDIV_OFFSET	0
-
-#define BSP_HB_ISUP_MUL		235
-#define BSP_HB_ISUP_DIV		6
-#define BSP_HB_ISUP_OFFSET	0
-
-#define BSP_HB_IOUT_MUL		215
-#define BSP_HB_IOUT_DIV		22
-#define BSP_HB_IOUT_OFFSET	0
-
-/**** Public function declarations ****/
-#ifdef TESTING
-#endif
-
-#endif /* BSP_CONFIG_H_ */

firmware/src/hw/board/din.c

@@ -1,83 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "din.h"
-
-/**** Private definitions ****/
-typedef struct {
-	uint8_t gpio_ch;
-	uint8_t invert;
-} dinchcfg_t;
-
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t din_mapping(uint8_t din_ch, dinchcfg_t* din_ch_cfg);
-
-/**** Public function definitions ****/
-uint8_t bsp_din_read(uint8_t ch)
-{
-	dinchcfg_t cfg;
-	// Get digital input config, and check validity
-	if(din_mapping(ch, &cfg)) return BSP_DIN_LOW;
-	
-	//Read GPIO
-	uint8_t raw = mcu_gpio_read(cfg.gpio_ch);
-	
-	// Check config and invert
-	if(cfg.invert) raw = util_invert_8b(raw);
-	
-	// Return result
-	return raw;
-}
-
-/**** Private function definitions ***/
-static uint8_t din_mapping(uint8_t din_ch, dinchcfg_t* din_ch_cfg)
-{
-	// By default ch is not inverted
-	din_ch_cfg->invert = 0;
-	
-	switch(din_ch)
-	{
-		case BSP_DIN1: //Mode
-		din_ch_cfg->gpio_ch = MCU_GPIO0;
-		return 0;
-		
-		case BSP_DIN2: //Pot
-		din_ch_cfg->gpio_ch = MCU_GPIO1;
-		return 0;
-		
-		case BSP_DIN3: //Down
-		din_ch_cfg->gpio_ch = MCU_GPIO2;
-		return 0;
-		
-		case BSP_DIN4: //Up
-		din_ch_cfg->gpio_ch = MCU_GPIO3;
-		return 0;
-		
-		case BSP_DIN5: //Dimm
-		din_ch_cfg->gpio_ch = MCU_GPIO4;
-		din_ch_cfg->invert = 1;
-		return 0;
-		
-		case BSP_DIN6: //Brakes
-		din_ch_cfg->gpio_ch = MCU_GPIO5;
-		din_ch_cfg->invert = 1;
-		return 0;
-		
-		case BSP_DIN7: //Handbrake
-		din_ch_cfg->gpio_ch = MCU_GPIO6;
-		din_ch_cfg->invert = 1;
-		return 0;
-		
-		case BSP_DIN7N: //Handbrake pull
-		din_ch_cfg->gpio_ch = MCU_GPIO7;
-		return 0;
-		
-		default: //Invalid channel
-		din_ch_cfg->gpio_ch = 0;
-		return 1;
-	}
-	
-	return 1;
-}

firmware/src/hw/board/din.h

@@ -1,37 +0,0 @@
-#ifndef DIN_H_
-#define DIN_H_
-
-/*
-DIN1		MODE
-DIN2		POT
-DIN3		DOWN
-DIN4		UP
-DIN5 HV		DIM
-DIN6 HV		BRAKES
-DIN7 HV		HANDBRAKE
-DIN8		HBRAKE PULL
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define BSP_DIN1	1
-#define BSP_DIN2	2
-#define BSP_DIN3	3
-#define BSP_DIN4	4
-#define BSP_DIN5	5
-#define BSP_DIN6	6
-#define BSP_DIN7	7
-#define BSP_DIN7N	8
-
-#define BSP_DIN_LOW		0
-#define BSP_DIN_HIGH	1
-
-/**** Public function declarations ****/
-uint8_t bsp_din_read(uint8_t ch);
-
-#ifdef TESTING
-#endif
-
-#endif /* DIN_H_ */

firmware/src/hw/board/dout.c

@@ -1,58 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "dout.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t dout_mapping(uint8_t dout_ch, uint8_t* gpio_ch);
-
-/**** Public function definitions ****/
-void bsp_dout_write(uint8_t ch, int8_t lvl)
-{
-	uint8_t gpio_ch;
-	// Get digital input config, and check validity
-	if(dout_mapping(ch, &gpio_ch)) return;
-	
-	// Write GPIO
-	mcu_gpio_write(gpio_ch, lvl);
-}
-
-/**** Private function definitions ***/
-static uint8_t dout_mapping(uint8_t dout_ch, uint8_t* gpio_ch)
-{
-	switch(dout_ch)
-	{
-		case BSP_DOUT1: //Mode
-		*gpio_ch = MCU_GPIO0;
-		return 0;
-		
-		case BSP_DOUT2: //Pot
-		*gpio_ch = MCU_GPIO1;
-		return 0;
-		
-		case BSP_DOUT3: //Down
-		*gpio_ch = MCU_GPIO2;
-		return 0;
-		
-		case BSP_DOUT4: //Up
-		*gpio_ch = MCU_GPIO3;
-		return 0;
-		
-		case BSP_DOUT5: //Handbrake pull
-		*gpio_ch = MCU_GPIO7;
-		return 0;
-		
-		case BSP_DOUT6: //Speed pull
-		*gpio_ch = MCU_GPIO8;
-		return 0;
-		
-		default: //Invalid channel
-		*gpio_ch = 0;
-		return 1;
-	}
-	
-	return 1;
-}

firmware/src/hw/board/dout.h

@@ -1,34 +0,0 @@
-#ifndef DOUT_H_
-#define DOUT_H_
-
-/*
-DOUT1		MODE
-DOUT2		POT
-DOUT3		DOWN
-DOUT4		UP
-DOUT5		HBRAKE PULL
-DOUT6		SPEED PULL
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define BSP_DOUT1	1
-#define BSP_DOUT2	2
-#define BSP_DOUT3	3
-#define BSP_DOUT4	4
-#define BSP_DOUT5	5
-#define BSP_DOUT6	6
-
-#define BSP_DOUT_LOW	0
-#define BSP_DOUT_HIGH	1
-#define BSP_DOUT_HIZ   -1
-
-/**** Public function declarations ****/
-void bsp_dout_write(uint8_t ch, int8_t lvl);
-
-#ifdef TESTING
-#endif
-
-#endif /* DOUT_H_ */

firmware/src/hw/board/halfbridge.c

@@ -1,179 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "halfbridge.h"
-
-/**** Private definitions ****/
-typedef struct {
-	uint8_t adc_ch;
-	uint8_t mul;
-	uint8_t div;
-	int16_t offset;
-} ainchcfg_t;
-
-typedef enum {
-	AIN_OUT_VOLTAGE,
-	AIN_OUT_CURRENT,
-	AIN_SUP_VOLTAGE,
-	AIN_SUP_CURRENT
-} hb_ainch_t;
-
-/**** Private constants ****/
-// Analog channels conversion coefficients
-static const uint8_t MV_MUL = BSP_HB_MV_MUL;
-static const uint8_t MV_DIV = BSP_HB_MV_DIV;
-static const int16_t MV_OFFSET = BSP_HB_MV_OFFSET;
-
-static const uint8_t UDIV_MUL = BSP_HB_UDIV_MUL;
-static const uint8_t UDIV_DIV = BSP_HB_UDIV_DIV;
-static const int16_t UDIV_OFFSET = BSP_HB_UDIV_OFFSET;
-
-static const uint8_t ISUP_MUL = BSP_HB_ISUP_MUL;
-static const uint8_t ISUP_DIV = BSP_HB_ISUP_DIV;
-static const int16_t ISUP_OFFSET = BSP_HB_ISUP_OFFSET;
-
-static const uint8_t IOUT_MUL = BSP_HB_IOUT_MUL;
-static const uint8_t IOUT_DIV = BSP_HB_IOUT_DIV;
-static const int16_t IOUT_OFFSET = BSP_HB_IOUT_OFFSET;
-
-/**** Private variables ****/
-
-/**** Mapping function declarations ****/
-static uint8_t hb_pwm_mapping(uint8_t* pwm_ch);
-static uint8_t hb_low_side_mapping(uint8_t* gpio_ch);
-static uint8_t hb_ain_mapping(hb_ainch_t ain_ch, ainchcfg_t* ain_ch_cfg);
-
-/**** Private function declarations ****/
-static uint16_t limit_pwm(uint16_t pwm_in);
-static uint16_t read_ain(hb_ainch_t ch);
-
-/**** Public function definitions ****/
-void bsp_hb_write_low(uint8_t state)
-{
-	uint8_t gpio_ch;
-	// Get GPIO channel, and check validity
-	if(hb_low_side_mapping(&gpio_ch)) return;
-	
-	// Set low side on or off
-	if(state) mcu_gpio_write(gpio_ch, MCU_GPIO_HIGH);
-	else mcu_gpio_write(gpio_ch, MCU_GPIO_LOW);
-}
-
-void bsp_hb_write_pwm(uint16_t pwm)
-{
-	uint8_t pwm_ch;
-	// Get PWM channel, and check validity
-	if(hb_pwm_mapping(&pwm_ch)) return;
-	
-	// Limit PWM, because of charge pump
-	pwm = limit_pwm(pwm);
-	
-	// Set pwm
-	mcu_pwm_write(pwm_ch, pwm);
-}
-
-void bsp_hb_read_meas(hb_meas_t* measurements)
-{
-	// Read analog inputs
-	measurements->out_voltage = read_ain(AIN_OUT_VOLTAGE);
-	measurements->out_current = read_ain(AIN_OUT_CURRENT);
-	measurements->sup_voltage = read_ain(AIN_SUP_VOLTAGE);
-	measurements->sup_current = read_ain(AIN_SUP_CURRENT);
-	
-	// Calculate secondary measurements
-	measurements->out_power = util_sat_mul_kilo(measurements->out_voltage, measurements->out_current);
-	measurements->sup_power = util_sat_mul_kilo(measurements->sup_voltage, measurements->sup_current);
-	
-	measurements->out_impedance = util_sat_div_kilo(measurements->out_voltage, measurements->out_current);
-	
-	uint8_t ch;
-	//Read low side control GPIO level
-	if(hb_low_side_mapping(&ch)) measurements->low_side_ctrl = 0;
-	else measurements->low_side_ctrl = mcu_gpio_read(ch);
-	
-	//Read PWM duty cycle in 16b format
-	if(hb_pwm_mapping(&ch)) measurements->pwm = 0;
-	else measurements->pwm = mcu_pwm_read(ch);
-}
-
-/**** Private function declarations ****/
-static uint16_t read_ain(hb_ainch_t ch)
-{
-	ainchcfg_t cfg;
-	// Get analog input config, and check validity
-	if(hb_ain_mapping(ch, &cfg)) return 0;
-	
-	//Read ADC
-	uint16_t raw = mcu_adc_read(cfg.adc_ch);
-	
-	//Convert to target units
-	raw = util_convert_muldivoff(raw, cfg.mul, cfg.div, cfg.offset);
-	
-	// Return result
-	return raw;
-}
-
-static uint16_t limit_pwm(uint16_t pwm_in)
-{
-	// Limit to ~95%
-	if (pwm_in > 0xFC00) return 0xFC00;
-	else return pwm_in;
-}
-
-/**** Mapping function definitions ****/
-static uint8_t hb_pwm_mapping(uint8_t* pwm_ch)
-{
-	*pwm_ch = MCU_PWM0;
-	return 0;
-}
-
-static uint8_t hb_low_side_mapping(uint8_t* gpio_ch)
-{
-	*gpio_ch = MCU_GPIO15;
-	return 0;
-}
-
-static uint8_t hb_ain_mapping(hb_ainch_t ain_ch, ainchcfg_t* ain_ch_cfg)
-{
-	switch(ain_ch)
-	{
-		case AIN_OUT_VOLTAGE:
-		ain_ch_cfg->adc_ch = MCU_ADC1;
-		ain_ch_cfg->mul = UDIV_MUL;
-		ain_ch_cfg->div = UDIV_DIV;
-		ain_ch_cfg->offset = UDIV_OFFSET;
-		return 0;
-		
-		case AIN_OUT_CURRENT:
-		ain_ch_cfg->adc_ch = MCU_ADC0;
-		ain_ch_cfg->mul = IOUT_MUL;
-		ain_ch_cfg->div = IOUT_DIV;
-		ain_ch_cfg->offset = IOUT_OFFSET;
-		return 0;
-		
-		case AIN_SUP_VOLTAGE:
-		ain_ch_cfg->adc_ch = MCU_ADC2;
-		ain_ch_cfg->mul = UDIV_MUL;
-		ain_ch_cfg->div = UDIV_DIV;
-		ain_ch_cfg->offset = UDIV_OFFSET;
-		return 0;
-		
-		case AIN_SUP_CURRENT:
-		ain_ch_cfg->adc_ch = MCU_ADC3;
-		ain_ch_cfg->mul = ISUP_MUL;
-		ain_ch_cfg->div = ISUP_DIV;
-		ain_ch_cfg->offset = ISUP_OFFSET;
-		return 0;
-		
-		default: //Invalid channel
-		ain_ch_cfg->adc_ch = MCU_ADC15;
-		// Default 10bit ADC with 5V reference to mV conversion
-		ain_ch_cfg->mul = MV_MUL;
-		ain_ch_cfg->div = MV_DIV;
-		ain_ch_cfg->offset = MV_OFFSET;
-		return 1;
-	}
-	
-	return 1;
-}
-

firmware/src/hw/board/halfbridge.h

@@ -1,34 +0,0 @@
-#ifndef HALFBRIDGE_H_
-#define HALFBRIDGE_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-#include "config.h"
-
-/**** Public definitions ****/
-typedef struct {
-	uint16_t out_voltage;
-	uint16_t out_current;
-	uint16_t sup_voltage;
-	uint16_t sup_current;
-	uint16_t out_power;
-	uint16_t sup_power;
-	uint16_t out_impedance;
-	uint8_t low_side_ctrl;
-	uint16_t pwm;
-} hb_meas_t;
-
-/**** Public function declarations ****/
-void bsp_hb_write_low(uint8_t state);
-void bsp_hb_write_pwm(uint16_t pwm);
-
-// Feedback functions
-void bsp_hb_read_meas(hb_meas_t* measurements);
-
-#ifdef TESTING
-#endif
-
-#endif /* HALFBRIDGE_H_ */

firmware/src/hw/board/mcu/mcu_hal.h

@@ -1,120 +0,0 @@
-#ifndef MCU_HAL_H_
-#define MCU_HAL_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-/*
-GPIO0	Down
-GPIO1	Up
-GPIO2	Mode
-GPIO3	Handbrake
-GPIO4	Brakes
-GPIO5	Dimm
-GPIO6	LED0
-GPIO7	LED1
-GPIO8	LED2
-GPIO9	LED3
-GPIO10	LED4
-GPIO11	LED5
-GPIO12	DCCD Enable
-GPIO13	Handbrake pull
-GPIO14	Speed pull
-GPIO15	DCCD PWM
-GPIO16	LED PWM
-
-ADC0	Output current
-ADC1	Output voltage
-ADC2	Battery current
-ADC3	Battery voltage
-ADC4	Potentiometer
-ADC5	Mode
-ADC8	MCU temperature
-ADC14	MCU internal reference
-ADC15	MCU ground
-*/
-
-#define MCU_GPIO0	0	//Mode
-#define MCU_GPIO1	1	//Pot
-#define MCU_GPIO2	2	//Down
-#define MCU_GPIO3	3	//Up
-#define MCU_GPIO4	4	//Dimm
-#define MCU_GPIO5	5	//Brakes
-#define MCU_GPIO6	6	//Handbrake
-#define MCU_GPIO7	7	//Handbrake pull
-#define MCU_GPIO8	8	//Speed pull
-#define MCU_GPIO9	9	//LED0
-#define MCU_GPIO10	10	//LED1
-#define MCU_GPIO11	11	//LED2
-#define MCU_GPIO12	12	//LED3
-#define MCU_GPIO13	13	//LED4
-#define MCU_GPIO14	14	//LED5
-#define MCU_GPIO15	15	//DCCD Enable
-#define MCU_GPIO16	16	//DCCD PWM
-#define MCU_GPIO17	17	//LED PWM
-
-#define MCU_GPIO_LOW	0
-#define MCU_GPIO_HIGH	1
-#define MCU_GPIO_HIZ	-1
-
-#define MCU_ADC0	0	//Output current
-#define MCU_ADC1	1	//Output voltage
-#define MCU_ADC2	2	//Battery voltage
-#define MCU_ADC3	3	//Battery current
-#define MCU_ADC4	4	//Potentiometer
-#define MCU_ADC5	5	//Mode
-#define MCU_ADC8	8	//MCU temperature
-#define MCU_ADC14	14	//MCU internal reference
-#define MCU_ADC15	15	//MCU ground
-
-#define MCU_PWM0	0	//DCCD
-#define MCU_PWM1	1	//LED
-
-//ADC definitions
-typedef enum {
-	MCU_ADC_DIV2 = 0x01,
-	MCU_ADC_DIV4 = 0x02,
-	MCU_ADC_DIV8 = 0x03,
-	MCU_ADC_DIV16 = 0x04,
-	MCU_ADC_DIV32 = 0x05,
-	MCU_ADC_DIV64 = 0x06,
-	MCU_ADC_DIV128 = 0x07
-} adcClkDiv_t;
-
-//Timer definitions
-typedef enum {
-	MCU_TIM_DIV1 = 0x01,
-	MCU_TIM_DIV8 = 0x02,
-	MCU_TIM_DIV64 = 0x03,
-	MCU_TIM_DIV256 = 0x04,
-	MCU_TIM_DIV1024 = 0x05
-} timerClkDiv_t;
-
-typedef struct {
-	adcClkDiv_t adc_clk;
-	timerClkDiv_t pwm_clk;
-	uint16_t pwm_top;
-	uint8_t pwm_chb_en;
-} startupCfg_t;
-
-/**** Public function declarations ****/
-void mcu_startup(startupCfg_t* hwCfg);
-
-uint8_t mcu_gpio_read(uint8_t ch);
-void mcu_gpio_write(uint8_t ch, int8_t lvl);
-
-uint16_t mcu_adc_read(uint8_t ch);
-
-void mcu_pwm_write(uint8_t ch, uint16_t dc);
-uint16_t mcu_pwm_read(uint8_t ch);
-
-uint8_t mcu_ee_read8b(uint16_t address);
-uint16_t mcu_ee_read16b(uint16_t address);
-uint32_t mcu_ee_read32b(uint16_t address);
-
-void mcu_ee_write8b(uint16_t address, uint8_t value);
-void mcu_ee_write16b(uint16_t address, uint16_t value);
-void mcu_ee_write32b(uint16_t address, uint32_t value);
-
-#endif /* MCU_HAL_H_ */

firmware/src/hw/board/odout.c

@@ -1,80 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "odout.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t odout_pwm_mapping(uint8_t* pwm_ch);
-static uint8_t odout_mapping(uint8_t od_ch, uint8_t* gpio_ch);
-
-
-/**** Public function definitions ****/
-void bsp_odout_write(uint8_t ch, int8_t lvl)
-{
-	uint8_t gpio_ch;
-	// Get GPIO channel config, and check validity
-	if(odout_mapping(ch, &gpio_ch)) return;
-	
-	// Set output level
-	if(lvl==0) mcu_gpio_write(gpio_ch, 1);	// Output active
-	else mcu_gpio_write(gpio_ch, 0);	    // Output off
-}
-
-void bsp_odout_write_common(uint8_t percent)
-{
-	uint8_t pwm_ch;
-	// Get PWM channel config, and check validity
-	if(odout_pwm_mapping(&pwm_ch)) return;
-	
-	// Convert percent to 16b duty cycle
-	uint16_t dc = util_percent_to_16b(percent);
-	
-	// Set PWM
-	mcu_pwm_write(pwm_ch, dc);
-}
-
-/**** Private function definitions ****/
-static uint8_t odout_pwm_mapping(uint8_t* pwm_ch)
-{
-	*pwm_ch = MCU_PWM1;
-	return 0;
-}
-
-static uint8_t odout_mapping(uint8_t od_ch, uint8_t* gpio_ch)
-{	
-	switch(od_ch)
-	{
-		case BSP_OD1: // LED0
-		*gpio_ch = MCU_GPIO9;
-		return 0;
-		
-		case BSP_OD2: // LED1
-		*gpio_ch = MCU_GPIO10;
-		return 0;
-		
-		case BSP_OD3: // LED2
-		*gpio_ch = MCU_GPIO11;
-		return 0;
-		
-		case BSP_OD4: // LED3
-		*gpio_ch = MCU_GPIO12;
-		return 0;
-		
-		case BSP_OD5: // LED4
-		*gpio_ch = MCU_GPIO13;
-		return 0;
-		
-		case BSP_OD6: // LED5
-		*gpio_ch = MCU_GPIO14;
-		return 0;
-		
-		default: //Invalid channel
-		*gpio_ch = 0;
-		return 1;
-	}
-	
-	return 1;
-}

firmware/src/hw/board/odout.h

@@ -1,37 +0,0 @@
-#ifndef ODOUT_H_
-#define ODOUT_H_
-
-/*
-OD1		LED 0
-OD2		LED 1
-OD3		LED 2
-OD4		LED 3
-OD5		LED 4
-OD6		LED 5
-
-COMMON	LED PWM
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define BSP_OD1		1
-#define BSP_OD2		2
-#define BSP_OD3		3
-#define BSP_OD4		4
-#define BSP_OD5		5
-#define BSP_OD6		6
-
-#define BSP_ODOUT_LOW	0
-#define BSP_ODOUT_HIGH	1
-#define BSP_ODOUT_HIZ   -1
-
-/**** Public function declarations ****/
-void bsp_odout_write(uint8_t ch, int8_t lvl);
-void bsp_odout_write_common(uint8_t percent);
-
-#ifdef TESTING
-#endif
-
-#endif /* ODOUT_H_ */

firmware/src/hw/board/setup.c

@@ -1,23 +0,0 @@
-/**** Includes ****/
-#include "utils/utils.h"
-#include "mcu/mcu_hal.h"
-#include "setup.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-
-/**** Private function definitions ****/
-void bsp_startup(void)
-{
-	startupCfg_t mcu_cfg;
-	
-	mcu_cfg.adc_clk = MCU_ADC_DIV2;
-	mcu_cfg.pwm_clk = MCU_TIM_DIV1;
-	mcu_cfg.pwm_top = 511;
-	mcu_cfg.pwm_chb_en = 1;
-	
-	mcu_startup(&mcu_cfg);
-}

firmware/src/hw/board/setup.h

@@ -1,14 +0,0 @@
-#ifndef BSP_SETUP_H_
-#define BSP_SETUP_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-/**** Public function declarations ****/
-void bsp_startup(void);
-
-#ifdef TESTING
-#endif
-
-#endif /* BSP_SETUP_H_ */

firmware/src/hw/board/utils/faults.c

@@ -1,67 +0,0 @@
-/**** Includes ****/
-#include "faults.h"
-#include "utils.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Mapping function declarations ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-#ifdef TESTING
-#endif
-
-uint8_t fault_process(fault_t* fault, uint8_t w_trig, uint8_t f_trig, fault_cfg_t* cfg)
-{
-	// Override warning trigger in case of fault trigger
-	if(f_trig) w_trig = 1;
-	
-	// Increase warning time, if reoccurring
-	if((w_trig)&&(fault->severity != FAULT_LVL_OK)) fault->w_time = util_sat_add_16b(fault->w_time, 1);
-	else fault->w_time = 0;
-	
-	// Check if waring can be considered fault
-	if((cfg->wtof > 0)&&(fault->w_time > cfg->wtof)) f_trig = 1;
-	
-	// Increase fault time, if reoccurring
-	if((f_trig)&&(fault->severity != FAULT_LVL_OK)) fault->f_time = util_sat_add_16b(fault->f_time, 1);
-	else fault->f_time = 0;
-	
-	// Modify fault trigger
-	if((cfg->delay)&&(fault->f_time < cfg->delay)) f_trig = 0;
-	
-	// Process fault level
-	if(f_trig)
-	{
-		fault->severity = FAULT_LVL_FAULT;
-		return 1;
-	}
-	else
-	{
-		if(w_trig) fault->severity = FAULT_LVL_WARNING;
-		else fault->severity = FAULT_LVL_OK;
-	}
-	
-	return 0;	
-}
-
-uint8_t fault_is_active(fault_t* fault)
-{
-	if(fault->severity == FAULT_LVL_FAULT) return 1;
-	else return 0;
-}
-
-uint8_t fault_is_warning(fault_t* fault)
-{
-	if(fault->severity != FAULT_LVL_OK) return 1;
-	else return 0;
-}
-
-void fault_reset(fault_t* fault)
-{
-	fault->severity = FAULT_LVL_OK;
-	fault->w_time = 0;
-	fault->f_time = 0;
-}
-
-/**** Private function definitions ****/

firmware/src/hw/board/utils/faults.h

@@ -1,37 +0,0 @@
-#ifndef FAULTS_H_
-#define FAULTS_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-typedef enum {
-	FAULT_LVL_OK,
-	FAULT_LVL_WARNING,
-	FAULT_LVL_FAULT
-} fault_lvl_t;
-
-typedef struct {
-	fault_lvl_t severity;
-	uint16_t w_time;
-	uint16_t f_time;
-} fault_t;
-
-typedef struct {
-	uint16_t delay;
-	uint16_t wtof;
-} fault_cfg_t;
-
-/**** Public function declarations ****/
-uint8_t fault_process(fault_t* fault, uint8_t w_trig, uint8_t f_trig, fault_cfg_t* cfg);
-uint8_t fault_is_active(fault_t* fault);
-uint8_t fault_is_warning(fault_t* fault);
-void fault_reset(fault_t* fault);
-
-#ifdef TESTING
-#endif
-
-#endif /* FAULTS_H_ */

firmware/src/hw/board/utils/fuses.c

@@ -1,81 +0,0 @@
-/**** Includes ****/
-#include "fuses.h"
-#include "utils.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Mapping function declarations ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-#ifdef TESTING
-#endif
-
-void fuse_reset(fuse_t* fuse)
-{
-	fuse->state = FUSE_OFF;
-	fuse->timer = 0;
-	fuse->count = 0;
-}
-
-uint8_t fuse_process(fuse_t* fuse, uint8_t fault, fuse_cfg_t* cfg)
-{
-	// Active fault condition
-	if(fault)
-	{
-		// Note fuse time count
-		if((fuse->state == FUSE_OFF)||(fuse->state == FUSE_RETRY)) fuse->count++;
-		
-		// Go to fused state in any case
-		fuse->state = FUSE_ACTIVE;
-		fuse->timer = 0;
-		return 1;
-	};
-	
-	// No active fault condition
-	if(fuse->state==FUSE_ACTIVE)
-	{
-		// Go to cooldown
-		fuse->state = FUSE_COOLDOWN;
-		fuse->timer = cfg->cooldown_time;
-	};
-	
-	// Wait for timeout
-	if(fuse->timer)
-	{
-		fuse->timer--;
-		if(fuse->state == FUSE_RETRY) return 0;
-		else return 1;
-	};
-	
-	// Timeout end, transition logic
-	switch(fuse->state)
-	{
-		case FUSE_COOLDOWN:
-		// Cooldown end
-		if(cfg->retry_time)
-		{
-			fuse->state = FUSE_RETRY;
-			fuse->timer = cfg->retry_time;
-		}
-		else
-		{
-			fuse->state = FUSE_OFF;
-			fuse->timer = 0;
-		}
-		break;
-		
-		case FUSE_RETRY:
-		// Go back to normal
-		fuse->state = FUSE_OFF;
-		break;
-		
-		default:
-		// Nothing to do
-		break;
-	}
-	
-	return 0;
-}
-
-/**** Private function definitions ****/

firmware/src/hw/board/utils/fuses.h

@@ -1,36 +0,0 @@
-#ifndef FUSES_H_
-#define FUSES_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-typedef enum {
-	FUSE_OFF,
-	FUSE_ACTIVE,
-	FUSE_COOLDOWN,
-	FUSE_RETRY
-} fuse_state_t;
-
-typedef struct {
-	fuse_state_t state;
-	uint8_t count;
-	uint16_t timer;
-} fuse_t;
-
-typedef struct {
-	uint16_t cooldown_time;
-	uint16_t retry_time;
-} fuse_cfg_t;
-
-/**** Public function declarations ****/
-void fuse_reset(fuse_t* fuse);
-uint8_t fuse_process(fuse_t* fuse, uint8_t fault, fuse_cfg_t* cfg);
-
-#ifdef TESTING
-#endif
-
-#endif /* FUSES_H_ */

firmware/src/hw/board/utils/utils.c

@@ -1,272 +0,0 @@
-/**** Includes ****/
-#include "utils.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-#ifndef TESTING
-static uint8_t find_interval_end_index(uint16_t val, uint16_t* axis_values, uint8_t len_axis);
-static uint16_t interpolate_u16b(uint16_t x, uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1);
-static uint16_t index2d_to_index1d(uint8_t ix, uint8_t iy, uint8_t len_x);
-#endif
-
-/**** Public function definitions ****/
-uint8_t util_invert_8b(uint8_t x)
-{
-	if(x!=0) return 0;
-	else return 1;
-}
-
-uint8_t util_sat_add_8b(uint8_t x, uint8_t y)
-{
-	uint8_t z = x + y;
-	// Check for overflow
-	if((z < x)||(z < y)) return 0xFF;
-	else return z;
-}
-
-uint8_t util_sat_subtract_8b(uint8_t x, uint8_t y)
-{
-	uint8_t z = x - y;
-	// Check for underflow
-	if(z > x) return 0;
-	else return z;
-}
-
-uint16_t util_sat_add_16b(uint16_t x, uint16_t y)
-{
-	uint16_t z = x + y;
-	// Check for overflow
-	if((z < x)||(z < y)) return 0xFFFF;
-	else return z;
-}
-
-uint16_t util_sat_subtract_16b(uint16_t x, uint16_t y)
-{
-	uint16_t z = x - y;
-	// Check for underflow
-	if(z > x) return 0;
-	else return z;
-}
-
-uint16_t util_limit_u32b_to_u16b(uint32_t in)
-{
-	if(in == 0) return 0;
-	else if(in >= 0x0000FFFF) return 0xFFFF;
-	else return (uint16_t)in;
-}
-
-uint16_t util_limit_s32b_to_u16b(int32_t in)
-{
-	if(in <= 0) return 0;
-	else if(in >= 0x0000FFFF) return 0xFFFF;
-	else return (uint16_t)in;
-}
-
-uint16_t util_convert_muldivoff(uint16_t raw, uint8_t mul, uint8_t div, int16_t offset)
-{
-	int32_t temp = (int32_t)raw;
-
-	temp = temp * mul;
-	if(div>1) temp /= div;
-	temp += offset;
-
-	return util_limit_s32b_to_u16b(temp);
-}
-
-uint16_t util_sat_mul_kilo(uint16_t xk, uint16_t yk)
-{
-	uint32_t temp = (uint32_t)xk * (uint32_t)yk;
-	temp /= 1000;
-
-	return util_limit_u32b_to_u16b(temp);
-}
-
-uint16_t util_sat_div_kilo(uint16_t top, uint16_t bot)
-{
-	//Sanity check bot
-	if(bot==0) return 0xFFFF; //aka infinity
-
-	uint32_t temp = (uint32_t)top * 1000;
-	temp /= (uint32_t)bot;
-
-	return util_limit_u32b_to_u16b(temp);
-}
-
-uint16_t util_sat_ratio_16b(uint16_t top, uint16_t bot)
-{
-	//Sanity check bot
-	if(bot==0) return 0xFFFF; //aka infinity
-
-	//Easy option
-	if(top>=bot) return 0xFFFF;
-
-	uint32_t temp = (uint32_t)top * 0x0000FFFF;
-	temp /= (uint32_t)bot;
-
-	return util_limit_u32b_to_u16b(temp);
-}
-
-uint16_t util_percent_to_16b(uint8_t percent)
-{
-	uint32_t temp = (uint32_t)percent * 0x0000FFFF;
-	temp /= 100;
-
-	// Limit to 16 bits
-	uint16_t pwm = util_limit_u32b_to_u16b(temp);
-
-	return pwm;
-}
-
-uint16_t util_interpolate_1d_u16b(uint16_t x, uint16_t* x_axis, uint16_t* y_values, uint8_t len_axis)
-{
-	// validate axis length
-	if(len_axis==0) return 0;			// Empty data set
-	if(len_axis==1) return y_values[0];	// Only one data point
-
-	uint16_t y;
-
-	uint8_t i = find_interval_end_index(x, x_axis, len_axis);
-	if(i==0)
-	{
-		//Less then start
-		y = y_values[0];
-	}
-	else if(i==len_axis)
-	{
-		//More than end
-		y = y_values[len_axis-1];
-	}
-	else
-	{
-		// Do interpolate
-		y = interpolate_u16b(x, x_axis[i-1], x_axis[i], y_values[i-1], y_values[i]);
-	}
-
-	return y;
-}
-
-uint16_t util_interpolate_2d_u16b(uint16_t x, uint16_t y, uint16_t* x_axis, uint8_t len_x_axis, uint16_t* y_axis, uint8_t len_y_axis, uint16_t* z_values)
-{
-	// validate axis length
-	if((len_x_axis==0)&&(len_y_axis==0)) return 0;				// Empty data set
-	if((len_x_axis==1)&&(len_y_axis==1)) return z_values[0];	// Only one data point
-
-	uint8_t ix = find_interval_end_index(x, x_axis, len_x_axis);
-	uint8_t iy = find_interval_end_index(y, y_axis, len_y_axis);
-
-	// Check corners - easy answers
-	if((ix==0)&&(iy==0))
-	{
-		return z_values[0];  //[0][0]  [Y][X]
-	}
-	else if((ix==len_x_axis)&&(iy==0))
-	{
-		return z_values[len_x_axis-1]; //[0][end]
-	}
-	else if((ix==0)&&(iy==len_y_axis))
-	{
-		uint16_t i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
-		return z_values[i]; //[end][0]
-	}
-	else if((ix==len_x_axis)&&(iy==len_y_axis))
-	{
-		uint16_t i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
-		return z_values[i];  //[end][end]
-	};
-
-	// Check boundaries - 1D interpolation
-	if(ix==0)
-    {
-        // On ix=0 line
-        uint16_t i = 0;
-        uint16_t z0 = z_values[i];
-        i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
-        uint16_t z1 = z_values[i];
-        return interpolate_u16b(y, y_axis[0], y_axis[len_y_axis-1], z0, z1);
-    }
-    else if(ix==len_x_axis)
-    {
-        // On ix=END line
-        uint16_t i = len_x_axis-1;
-        uint16_t z0 = z_values[i];
-        i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
-        uint16_t z1 = z_values[i];
-        return interpolate_u16b(y, y_axis[0], y_axis[len_y_axis-1], z0, z1);
-    }
-    else if(iy==0)
-    {
-        // On iy=0 line
-        uint16_t i = 0;
-        uint16_t z0 = z_values[i];
-        i = len_x_axis-1;
-        uint16_t z1 = z_values[i];
-        return interpolate_u16b(x, x_axis[0], x_axis[len_x_axis-1], z0, z1);
-    }
-    else if(iy==len_y_axis)
-    {
-        // On iy=END line
-        uint16_t i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
-        uint16_t z0 = z_values[i];
-        i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
-        uint16_t z1 = z_values[i];
-        return interpolate_u16b(x, x_axis[0], x_axis[len_x_axis-1], z0, z1);
-    }
-
-	// Do interpolation
-	// Get axis values
-	uint16_t x0 = x_axis[ix-1];
-	uint16_t x1 = x_axis[ix];
-	uint16_t y0 = y_axis[iy-1];
-	uint16_t y1 = y_axis[iy];
-
-	// Do y0 line calculation
-	// Get z values at x0 and x1 points on y0 line
-	uint16_t i = index2d_to_index1d(ix-1, iy-1, len_x_axis);
-	uint16_t z0 = z_values[i];
-	uint16_t z1 = z_values[i+1];
-	// Interpolate z value on y0 line
-	uint16_t zy0 = interpolate_u16b(x, x0, x1, z0, z1);
-
-	// Do y1 line calculation
-	// Get z values at x0 and x1 points on y1 line
-	i = index2d_to_index1d(ix-1, iy, len_x_axis);
-	z0 = z_values[i];
-	z1 = z_values[i+1];
-	// Interpolate z value on y0 line
-	uint16_t zy1 = interpolate_u16b(x, x0, x1, z0, z1);
-
-	// Do calculation in y axis on xz line
-	return interpolate_u16b(y, y0, y1, zy0, zy1);
-}
-
-/**** Private function definitions ****/
-static uint16_t interpolate_u16b(uint16_t x, uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1)
-{
-	int32_t dy = (int32_t)y1 - (int32_t)y0;
-	int32_t dx = (int32_t)x1 - (int32_t)x0;
-	int32_t d = (int32_t)x - (int32_t)x0;
-
-	int32_t y = dy * d;
-	y /= dx;
-	y += y0;
-
-	return util_limit_s32b_to_u16b(y);
-}
-
-static uint8_t find_interval_end_index(uint16_t val, uint16_t* axis_values, uint8_t len_axis)
-{
-	for(uint8_t i=0; i<len_axis; i++)
-	{
-		if(val < axis_values[i]) return i;
-		continue;
-	}
-
-	return len_axis;
-}
-
-static uint16_t index2d_to_index1d(uint8_t ix, uint8_t iy, uint8_t len_x)
-{
-	return ((uint16_t)len_x * iy) + ix;
-}

firmware/src/hw/board/utils/utils.h

@@ -1,37 +0,0 @@
-#ifndef UTILS_H_
-#define UTILS_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-
-/**** Public function declarations ****/
-uint8_t util_invert_8b(uint8_t x);
-
-uint16_t util_limit_u32b_to_u16b(uint32_t in);
-uint16_t util_limit_s32b_to_u16b(int32_t in);
-
-uint16_t util_convert_muldivoff(uint16_t raw, uint8_t mul, uint8_t div, int16_t offset);
-uint16_t util_sat_mul_kilo(uint16_t xk, uint16_t yk);
-uint16_t util_sat_div_kilo(uint16_t top, uint16_t bot);
-uint16_t util_sat_ratio_16b(uint16_t top, uint16_t bot);
-uint16_t util_percent_to_16b(uint8_t percent);
-
-uint8_t util_sat_add_8b(uint8_t x, uint8_t y);
-uint8_t util_sat_subtract_8b(uint8_t x, uint8_t y);
-
-uint16_t util_sat_add_16b(uint16_t x, uint16_t y);
-uint16_t util_sat_subtract_16b(uint16_t x, uint16_t y);
-
-uint16_t util_interpolate_1d_u16b(uint16_t x, uint16_t* x_axis, uint16_t* y_values, uint8_t len_axis);
-uint16_t util_interpolate_2d_u16b(uint16_t x, uint16_t y, uint16_t* x_axis, uint8_t len_x_axis, uint16_t* y_axis, uint8_t len_y_axis, uint16_t* z_values);
-
-#ifdef TESTING
-// Access to private functions for unit testing
-static uint8_t find_interval_end_index(uint16_t val, uint16_t* axis_values, uint8_t len_axis);
-static uint16_t interpolate_u16b(uint16_t x, uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1);
-static uint16_t index2d_to_index1d(uint8_t ix, uint8_t iy, uint8_t len_x);
-#endif
-
-#endif /* UTILS_H_ */

firmware/src/hw/button.cpp

@@ -0,0 +1,85 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "button.h"
+
+using namespace hw;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+hw::Button::Button(board::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state)
+{
+	this->din_ch = din_ch;
+	
+	if(act_lvl) this->act_lvl = board::DIN_HIGH;
+	else this->act_lvl = board::DIN_LOW;
+	
+	this->dbnc_cnter = 0;
+	this->dbnc_lim = dbnc_lim;
+	
+	if(init_state) this->state = BUTTON_ON;
+	else this->state = BUTTON_OFF;
+	
+	this->time = 0;
+	this->is_new = 0;
+}
+
+hw::Button::~Button(void)
+{
+	return;
+}
+
+uint8_t hw::Button::read(void)
+{
+	// Read din level
+	uint8_t lvl = this->din_ch->read();
+	
+	// Increase state counter
+	this->time = util::sat_add(this->time, 1);
+	
+	// Determine next state
+	uint8_t next_state = BUTTON_OFF;
+	if(lvl==this->act_lvl) next_state = BUTTON_ON;
+	
+	// Advance debounce sample counter
+	if(next_state != this->state) this->dbnc_cnter++;
+	else this->dbnc_cnter = 0;
+	
+	// Check for debounce end
+	if(this->dbnc_cnter < this->dbnc_lim) return this->state;
+	
+	// Debounce end. Apply new state.
+	this->state = next_state;
+	this->time = 0;
+	this->is_new = 1;
+	this->dbnc_cnter = 0;
+	
+	return this->state;
+}
+
+uint8_t hw::Button::force_read(void)
+{
+	// Read din level
+	uint8_t lvl = this->din_ch->read();
+	
+	// Cancels active debounce
+	this->dbnc_cnter = 0;
+	
+	// Determine next state
+	uint8_t next_state = BUTTON_OFF;
+	if(lvl==this->act_lvl) next_state = BUTTON_ON;
+	
+	if(next_state != this->state)
+	{
+		this->state = next_state;
+		this->time = 0;
+		this->is_new = 1;
+	};
+	
+	return this->state;
+}
+
+/**** Private function definitions ****/

firmware/src/hw/button.h

@@ -0,0 +1,41 @@
+#ifndef BUTTON_H_
+#define BUTTON_H_
+
+/**** Includes ****/
+#include <stdint.h>
+#include "../board/din.h"
+
+namespace hw {
+
+/**** Public definitions ****/
+const uint8_t BUTTON_OFF  = 0;
+const uint8_t BUTTON_ON = 1;
+
+class Button
+{
+	protected:
+	board::DigitalIn* din_ch;
+	uint8_t act_lvl;
+	uint8_t dbnc_cnter;
+	
+	public:
+	Button(board::DigitalIn* din_ch, uint8_t act_lvl, uint8_t dbnc_lim, uint8_t init_state);
+	~Button(void);
+	
+	uint8_t state;
+	uint16_t time;
+	uint8_t dbnc_lim;
+	uint8_t is_new;
+	
+	uint8_t read(void);
+	uint8_t force_read(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* BUTTON_H_ */

firmware/src/hw/buttons.c

@@ -1,173 +0,0 @@
-/**** Includes ****/
-#include "board/utils/utils.h"
-#include "board/din.h"
-#include "board/dout.h"
-#include "buttons.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-static const uint8_t DEF_DBNC_LIM = HW_BTN_DEF_DBNC_LIM;
-static const uint16_t DEF_REPEAT_TIME = HW_BTN_DEF_REPEAT_TIME;
-
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t buttons_mapping(uint8_t btn_ch,  uint8_t* din_ch, btn_cfg_t* cfg);
-static uint8_t buttons_pull_mapping(uint8_t btn_ch,  uint8_t* dout_ch);
-
-/**** Public function definitions ****/
-void btn_reset(btn_t* btn)
-{
-	btn->state = BTN_INACTIVE;
-	btn->new_state = 0;
-	btn->state_time = 0;
-	btn->transition_cntr = 0;
-	btn->dbnc_active = 1;
-}
-
-uint8_t btn_ch_process(uint8_t btn_ch, btn_t* btn)
-{
-	// Get channel config
-	uint8_t din_ch;
-	btn_cfg_t cfg;
-	if(buttons_mapping(btn_ch, &din_ch, &cfg)) return BTN_INACTIVE;
-
-	// Read din level
-	uint8_t lvl = bsp_din_read(din_ch);
-
-	// Process button logic
-	uint8_t btn_act = btn_process(lvl, btn, &cfg);
-	return btn_act;
-}
-
-uint8_t btn_process(uint8_t lvl, btn_t* btn, btn_cfg_t* cfg)
-{
-	// Increase state time
-	btn->state_time = util_sat_add_16b(btn->state_time, 1);
-
-	// Check repeated new flag
-	if((cfg->repeat_time)&&(btn->state_time < 0xFFFF))
-	{
-		if((btn->state_time)%(cfg->repeat_time) == 0) btn->new_state = 1;
-	};
-
-	// Calculate saved level from state and active level cfg
-	uint8_t prev_lvl = 0;
-	if(((btn->dbnc_active)&&(btn->state))||((!btn->dbnc_active)&&(!btn->state))) prev_lvl = util_invert_8b(cfg->act_lvl);
-	else prev_lvl = cfg->act_lvl;
-
-	// Check if level changed
-	uint8_t lvl_chnaged = 0;
-	if(lvl!=prev_lvl) lvl_chnaged = 1;
-
-	//Process debounce logic
-	if(lvl_chnaged)
-	{
-		// Changed debounce state
-		if(!btn->dbnc_active) btn->dbnc_active = 1; // Start debounce
-		else btn->dbnc_active = 0; // Stop debounce
-		// Reset debounce counter
-		btn->transition_cntr = 0;
-	}
-	else
-	{
-		// Continue debounce
-		if(btn->dbnc_active) btn->transition_cntr += 1;
-	}
-
-	// Check for debounce end
-	if((btn->dbnc_active)&&(btn->transition_cntr >= cfg->dbnc_lim))
-	{
-		// Reset debounce
-		btn->dbnc_active = 0; //End debounce
-		btn->transition_cntr = 0;
-		// Set new state
-		if(lvl==cfg->act_lvl) btn->state = BTN_ACTIVE;
-		else btn->state = BTN_INACTIVE;
-		btn->state_time = 0;	//Reset timer
-		btn->new_state = 1;     //Set new flag
-	};
-
-	return btn->state;
-}
-
-void btn_ch_set_pull(uint8_t btn_ch, int8_t lvl)
-{
-	// Get channel config
-	uint8_t dout_ch;
-	if(buttons_pull_mapping(btn_ch, &dout_ch)) return;
-
-	// Set button pull
-	bsp_dout_write(dout_ch, lvl);
-}
-
-/**** Private function definitions ****/
-static uint8_t buttons_mapping(uint8_t btn_ch,  uint8_t* din_ch, btn_cfg_t* cfg)
-{
-	// Default, most common config
-	cfg->act_lvl = BSP_DIN_LOW;
-	cfg->dbnc_lim = DEF_DBNC_LIM;
-	cfg->repeat_time = DEF_REPEAT_TIME;
-
-	switch(btn_ch)
-	{
-		case BTN_1: // Mode
-		*din_ch = BSP_DIN1;
-		return 0;
-
-		case BTN_2: // Down
-		*din_ch = BSP_DIN3;
-		return 0;
-
-		case BTN_3: // Up
-		*din_ch = BSP_DIN4;
-		return 0;
-
-		case BTN_4: // Dimm
-		*din_ch = BSP_DIN5;
-		cfg->act_lvl = BSP_DIN_HIGH;
-		cfg->repeat_time = 0;
-		return 0;
-
-		case BTN_5: // Brakes
-		*din_ch = BSP_DIN6;
-		cfg->act_lvl = BSP_DIN_HIGH;
-		cfg->repeat_time = 0;
-		return 0;
-
-		case BTN_6: // Handbrake
-		*din_ch = BSP_DIN7;
-		cfg->repeat_time = 0;
-		return 0;
-
-		case BTN_6N: // Handbrake inverted
-		*din_ch = BSP_DIN7N;
-		cfg->repeat_time = 0;
-		return 0;
-
-		default: //Invalid channel
-		*din_ch = 0;
-		return 1;
-	}
-
-	return 1;
-}
-
-static uint8_t buttons_pull_mapping(uint8_t btn_ch,  uint8_t* dout_ch)
-{
-	switch(btn_ch)
-	{
-		case BTN_6: // Handbrake
-		*dout_ch = BSP_DOUT5;
-		return 0;
-
-		case BTN_6N: // Handbrake inverted
-		*dout_ch = BSP_DOUT5;
-		return 0;
-
-		default: //Invalid channel
-		*dout_ch = 0;
-		return 1;
-	}
-
-	return 1;
-}

firmware/src/hw/buttons.h

@@ -1,54 +0,0 @@
-#ifndef BUTTONS_H_
-#define BUTTONS_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-#include "config.h"
-
-/**** Public definitions ****/
-typedef struct {
-	uint8_t act_lvl;
-	uint8_t dbnc_lim;
-	uint16_t repeat_time;
-} btn_cfg_t;
-
-typedef struct {
-	uint8_t state;
-	uint8_t new_state;
-	uint16_t state_time;
-	uint8_t transition_cntr;
-	uint8_t dbnc_active;
-} btn_t;
-
-#define BTN_1	1  //DIN1 Mode
-#define BTN_2	2  //DIN3 Down
-#define BTN_3	3  //DIN4 Up
-#define BTN_4	4  //DIN5 Dimm
-#define BTN_5	5  //DIN6 Brakes
-#define BTN_6	6  //DIN7 Handbrake
-#define BTN_6N	7  //DIN7N Direct handbrake
-
-#define BTN_INACTIVE	0
-#define BTN_ACTIVE		1
-
-#define BTN_PULL_LOW	0
-#define BTN_PULL_HIGH	1
-#define BTN_PULL_NONE  -1
-
-/**** Public function declarations ****/
-void btn_reset(btn_t* btn);
-
-// Using internal map
-uint8_t btn_ch_process(uint8_t btn_ch, btn_t* btn);
-void btn_ch_set_pull(uint8_t btn_ch, int8_t lvl);
-
-// Manual process
-uint8_t btn_process(uint8_t lvl, btn_t* btn, btn_cfg_t* cfg);
-
-#ifdef TESTING
-#endif
-
-#endif /* BUTTONS_H_ */

firmware/src/hw/config.h

@@ -1,45 +0,0 @@
-#ifndef HW_CONFIG_H_
-#define HW_CONFIG_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define HW_BTN_DEF_DBNC_LIM		10
-#define HW_BTN_DEF_REPEAT_TIME	1000
-
-#define HW_HB_SUPPLY_VOLT_MIN_W		10000
-#define HW_HB_SUPPLY_VOLT_MIN_F		8000
-
-#define HW_HB_SUPPLY_VOLT_MAX_W		16000
-#define HW_HB_SUPPLY_VOLT_MAX_F		19500
-
-#define HW_HB_SUPPLY_CURRENT_MAX_W	6000
-#define HW_HB_SUPPLY_CURRENT_MAX_F	8000
-
-#define HW_HB_SUPPLY_POWER_MAX_W	30000
-#define HW_HB_SUPPLY_POWER_MAX_F	45000
-
-#define HW_HB_OUT_CURRENT_MAX_W		6000
-#define HW_HB_OUT_CURRENT_MAX_F		8000
-
-#define HW_HB_OUT_VOLTAGE_MAX_W		8000
-#define HW_HB_OUT_VOLTAGE_MAX_F		10000
-
-#define HW_HB_OUT_POWER_MAX_W		30000
-#define HW_HB_OUT_POWER_MAX_F		40000
-
-#define HW_HB_OUT_RESISTANCE_MIN_W	750
-#define HW_HB_OUT_RESISTANCE_MIN_F	500
-
-#define HW_HB_OUT_RESISTANCE_MAX_W	5000
-#define HW_HB_OUT_RESISTANCE_MAX_F	10000
-
-#define HW_HB_FAULT_DELAY			500
-#define HW_HB_WTOF_DELAY			0
-
-/**** Public function declarations ****/
-#ifdef TESTING
-#endif
-
-#endif /* HW_CONFIG_H_ */

firmware/src/hw/cv_driver.cpp

@@ -0,0 +1,40 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "cv_driver.h"
+
+using namespace hw;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+hw::CVdriver::CVdriver(board::AnalogIn* sup_voltage, board::AnalogIn* out_voltage, board::Hafbridge* hbridge)
+{
+	this->sup_voltage = sup_voltage;
+	this->hbridge = hbridge;
+	this->target = 0;
+	this->off = 1;
+}
+
+hw::CVdriver::~CVdriver(void)
+{
+	return;
+}
+
+void hw::CVdriver::update(void)
+{
+	// Update all inputs
+	this->sup_voltage->read();
+	
+	// Calculate ratio
+	uint16_t ratio = util::sat_ratio(this->target, this->sup_voltage->last_read);
+	
+	// Set output
+	this->hbridge->write(ratio);
+}
+
+
+
+/**** Private function definitions ****/

firmware/src/hw/cv_driver.h

@@ -0,0 +1,37 @@
+#ifndef CONST_VOLTAGE_DRIVER_H_
+#define CONST_VOLTAGE_DRIVER_H_
+
+/**** Includes ****/
+#include <stdint.h>
+#include "../board/ain.h"
+#include "../board/halfbridge.h"
+
+namespace hw {
+
+/**** Public definitions ****/
+
+class CVdriver
+{
+	protected:
+	board::AnalogIn* sup_voltage;
+	
+	board::Hafbridge* hbridge;
+	
+	public:
+	CVdriver(board::AnalogIn* sup_voltage, board::Hafbridge* hbridge);
+	~CVdriver(void);
+	
+	uint16_t target = 0;
+	uint8_t off = 0;
+	
+	void process(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* CONST_VOLTAGE_DRIVER_H_ */

firmware/src/hw/display_led.cpp

@@ -0,0 +1,180 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "display_led.h"
+
+using namespace hw;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+static uint8_t img_gen_dot10(uint8_t percent);
+static uint8_t img_gen_dot20(uint8_t percent);
+static uint8_t img_gen_bar(uint8_t percent);
+
+/**** Public function definitions ****/
+hw::DisplayLed::DisplayLed(board::DigitalOut* led0, board::DigitalOut* led1, board::DigitalOut* led2, board::DigitalOut* led3, board::DigitalOut* led4, board::DigitalOut* led5, board::PWMout* common)
+{
+	this->led0 = led0;
+	this->led1 = led1;
+	this->led2 = led2;
+	this->led3 = led3;
+	this->led4 = led4;
+	this->led5 = led5;
+	this->common = common;
+	
+	this->led0->write(0);
+	this->led1->write(0);
+	this->led2->write(0);
+	this->led3->write(0);
+	this->led4->write(0);
+	this->led5->write(0);
+	this->common->write(0);
+}
+
+hw::DisplayLed::~DisplayLed(void)
+{
+	this->led0->write(0);
+	this->led1->write(0);
+	this->led2->write(0);
+	this->led3->write(0);
+	this->led4->write(0);
+	this->led5->write(0);
+	this->common->write(0);
+}
+
+void hw::DisplayLed::show_percent(uint8_t percent, style_t style)
+{
+	uint8_t image = 0x00;
+	
+	switch(style)
+	{
+		case LED_DSP_BAR:
+		image = img_gen_bar(percent);
+		break;
+		
+		case LED_DSP_DOT10:
+		image = img_gen_dot10(percent);
+		break;
+		
+		default:
+		image = img_gen_dot20(percent);
+		break;
+	}
+	
+	this->write(image);
+}
+
+void hw::DisplayLed::write(uint8_t image)
+{
+	if(image&0x01) this->led0->write(1);
+	else this->led0->write(0);
+	
+	if(image&0x02) this->led1->write(1);
+	else this->led1->write(0);
+	
+	if(image&0x04) this->led2->write(1);
+	else this->led2->write(0);
+	
+	if(image&0x08) this->led3->write(1);
+	else this->led3->write(0);
+	
+	if(image&0x10) this->led4->write(1);
+	else this->led4->write(0);
+	
+	if(image&0x20) this->led5->write(1);
+	else this->led5->write(0);
+}
+
+void hw::DisplayLed::set_brigthness(uint8_t percent)
+{
+	this->common->write(percent);
+}
+
+/**** Private function definitions ****/
+static uint8_t img_gen_dot10(uint8_t percent)
+{
+	switch(percent)
+	{
+		case 0 ... 5:
+		return 0x01;
+		
+		case 6 ... 15:
+		return 0x03;
+		
+		case 16 ... 25:
+		return 0x02;
+		
+		case 26 ... 35:
+		return 0x06;
+		
+		case 36 ... 45:
+		return 0x04;
+		
+		case 46 ... 55:
+		return 0x0C;
+		
+		case 56 ... 65:
+		return 0x08;
+		
+		case 66 ... 75:
+		return 0x18;
+		
+		case 76 ... 85:
+		return 0x10;
+		
+		case 86 ... 95:
+		return 0x30;
+		
+		default:
+		return 0x20;
+	}
+}
+
+static uint8_t img_gen_dot20(uint8_t percent)
+{
+	switch(percent)
+	{
+		case 0 ... 10:
+		return 0x01;
+		
+		case 11 ... 30:
+		return 0x02;
+		
+		case 31 ... 50:
+		return 0x04;
+		
+		case 51 ... 70:
+		return 0x08;
+		
+		case 71 ... 90:
+		return 0x10;
+		
+		default:
+		return 0x20;
+	}
+}
+
+static uint8_t img_gen_bar(uint8_t percent)
+{
+	switch(percent)
+	{
+		case 0 ... 10:
+		return 0x01;
+		
+		case 11 ... 30:
+		return 0x03;
+		
+		case 31 ... 50:
+		return 0x07;
+		
+		case 51 ... 70:
+		return 0x0F;
+		
+		case 71 ... 90:
+		return 0x1F;
+		
+		default:
+		return 0x3F;
+	}
+}

firmware/src/hw/display_led.h

@@ -0,0 +1,47 @@
+#ifndef DISPLAY_LED_H_
+#define DISPLAY_LED_H_
+
+/**** Includes ****/
+#include <stdint.h>
+#include "../board/dout.h"
+#include "../board/pwm.h"
+
+namespace hw {
+
+/**** Public definitions ****/
+
+class DisplayLed
+{
+	protected:
+	board::DigitalOut* led0;
+	board::DigitalOut* led1;
+	board::DigitalOut* led2;
+	board::DigitalOut* led3;
+	board::DigitalOut* led4;
+	board::DigitalOut* led5;
+	board::PWMout* common;
+	
+	public:
+	typedef enum {
+		LED_DSP_DOT20,
+		LED_DSP_DOT10,
+		LED_DSP_BAR
+	} style_t;
+	
+	DisplayLed(board::DigitalOut* led0, board::DigitalOut* led1, board::DigitalOut* led2, board::DigitalOut* led3, board::DigitalOut* led4, board::DigitalOut* led5, board::PWMout* common);
+	~DisplayLed(void);
+	
+	void show_percent(uint8_t percent, style_t style);
+	void write(uint8_t image);
+	
+	void set_brigthness(uint8_t percent);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* DISPLAY_LED_H_ */

firmware/src/hw/hb_control.c

@@ -1,399 +0,0 @@
-/**** Includes ****/
-#include "board/utils/utils.h"
-#include "board/halfbridge.h"
-#include "hb_control.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-// Fault condition thresholds
-static const uint16_t SUPPLY_VOLT_MIN_W = HW_HB_SUPPLY_VOLT_MIN_W;
-static const uint16_t SUPPLY_VOLT_MIN_F = HW_HB_SUPPLY_VOLT_MIN_F;
-
-static const uint16_t SUPPLY_VOLT_MAX_W = HW_HB_SUPPLY_VOLT_MAX_W;
-static const uint16_t SUPPLY_VOLT_MAX_F = HW_HB_SUPPLY_VOLT_MAX_F;
-
-static const uint16_t SUPPLY_CURRENT_MAX_W = HW_HB_SUPPLY_CURRENT_MAX_W;
-static const uint16_t SUPPLY_CURRENT_MAX_F = HW_HB_SUPPLY_CURRENT_MAX_F;
-
-static const uint16_t SUPPLY_POWER_MAX_W = HW_HB_SUPPLY_POWER_MAX_W;
-static const uint16_t SUPPLY_POWER_MAX_F = HW_HB_SUPPLY_POWER_MAX_F;
-
-static const uint16_t OUT_CURRENT_MAX_W = HW_HB_OUT_CURRENT_MAX_W;
-static const uint16_t OUT_CURRENT_MAX_F = HW_HB_OUT_CURRENT_MAX_F;
-
-static const uint16_t OUT_VOLTAGE_MAX_W = HW_HB_OUT_VOLTAGE_MAX_W;
-static const uint16_t OUT_VOLTAGE_MAX_F = HW_HB_OUT_VOLTAGE_MAX_F;
-
-static const uint16_t OUT_POWER_MAX_W = HW_HB_OUT_POWER_MAX_W;
-static const uint16_t OUT_POWER_MAX_F = HW_HB_OUT_POWER_MAX_F;
-
-static const uint16_t OUT_RESISTANCE_MIN_W = HW_HB_OUT_RESISTANCE_MIN_W;
-static const uint16_t OUT_RESISTANCE_MIN_F = HW_HB_OUT_RESISTANCE_MIN_F;
-
-static const uint16_t OUT_RESISTANCE_MAX_W = HW_HB_OUT_RESISTANCE_MAX_W;
-static const uint16_t OUT_RESISTANCE_MAX_F = HW_HB_OUT_RESISTANCE_MAX_F;
-
-static const uint16_t FAULT_DELAY = HW_HB_FAULT_DELAY;
-static const uint16_t WTOF_DELAY = HW_HB_WTOF_DELAY;
-
-/**** Private variables ****/
-
-/**** Private function declarations ****/
-// Protection functions
-static void faults_chs_reset(hb_fault_chs_t* ch_list);
-static void faults_init(hb_faults_t* faults, hb_fault_chs_t* en_list);
-static void faults_logic(hb_meas_t* measurements, hb_faults_t* faults);
-
-static uint8_t faults_check(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list, fault_lvl_t check);
-static uint8_t warnings_feedback(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list);
-static uint8_t faults_feedback(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list);
-static uint8_t faults_is_any(hb_fault_chs_t* fb_list);
-
-static uint8_t is_outside(uint16_t meas, uint16_t min, uint16_t max);
-
-static uint8_t fuse_subprocess(hb_feedback_t* hb_fb, hb_control_t* hb_ctrl);
-static void target_to_control(int16_t target, uint16_t ref_voltage, uint16_t* pwm_out, uint8_t* low_out, hb_fault_chs_t* fault_ch_en);
-
-/**** Public function definitions ****/
-void hb_init(hb_feedback_t* hb_fb, hb_control_t* hb_ctrl)
-{
-	// Initialize control
-	hb_ctrl->enabled = 0;
-
-	// Initialize protection structures
-	faults_init(&hb_ctrl->out_faults, &hb_ctrl->out_faults_en);
-
-	fuse_reset(&hb_ctrl->out_fuse);
-	hb_ctrl->out_fuse_cfg.cooldown_time = 1000;
-	hb_ctrl->out_fuse_cfg.retry_time = 1000;
-
-	// Initialize feedback structure
-	bsp_hb_read_meas(&hb_fb->analog);
-	faults_chs_reset(&hb_fb->faults);
-	faults_chs_reset(&hb_fb->warnings);
-
-	hb_fb->enabled = 0;
-	hb_fb->warning_act = 0;
-	hb_fb->fault_act = 0;
-	hb_fb->fused = 0;
-
-	bsp_hb_write_pwm(0);
-	bsp_hb_write_low(0);
-}
-
-void hb_enable(hb_control_t* hb_ctrl)
-{
-	bsp_hb_write_pwm(0);
-	bsp_hb_write_low(1);
-	hb_ctrl->enabled = 1;
-}
-
-void hb_disable(hb_control_t* hb_ctrl)
-{
-	hb_ctrl->enabled = 0;
-	bsp_hb_write_pwm(0);
-	bsp_hb_write_low(0);
-}
-
-
-void hb_process(int16_t target, hb_feedback_t* hb_fb, hb_control_t* hb_ctrl)
-{
-	uint16_t out_pwm = 0;
-	uint8_t low_on = 0;
-
-	// Read feedback
-	bsp_hb_read_meas(&hb_fb->analog);
-
-	// Process fuse
-	uint8_t fuse_act = fuse_subprocess(hb_fb, hb_ctrl);
-
-	// Act on fuse state
-	if((fuse_act)||(!hb_ctrl->enabled))
-	{
-		// Turn off output
-		bsp_hb_write_pwm(0);
-		bsp_hb_write_low(0);
-		return;
-	};
-
-	// Process new target
-	target_to_control(target, hb_fb->analog.sup_voltage, &out_pwm, &low_on, &hb_ctrl->out_faults_en);
-
-	// Apply new controls
-	bsp_hb_write_low(low_on);
-	bsp_hb_write_pwm(out_pwm);
-}
-
-/**** Private function definitions ****/
-static void target_to_control(int16_t target, uint16_t ref_voltage, uint16_t* pwm_out, uint8_t* low_out, hb_fault_chs_t* fault_ch_en)
-{
-	if(target < 0)
-	{
-		// Fast decay
-		*pwm_out = 0;
-		*low_out = 0;
-		// Set appropriate fault channels
-		fault_ch_en->out_short = 0;
-		fault_ch_en->out_ovp = 0;
-	}
-	else if(target == 0)
-	{
-		// Slow decay
-		*pwm_out = 0;
-		*low_out = 1;
-		// Set appropriate fault channels
-		fault_ch_en->out_short = 0;
-		fault_ch_en->out_ovp = 1;
-	}
-	else
-	{
-		// Calculate target PWM
-		*pwm_out =  util_sat_ratio_16b((uint16_t)target, ref_voltage);
-		*low_out = 1;
-		fault_ch_en->out_short = 1;
-		fault_ch_en->out_ovp = 1;
-	}
-}
-
-static uint8_t fuse_subprocess(hb_feedback_t* hb_fb, hb_control_t* hb_ctrl)
-{
-	// Process faults
-	faults_logic(&hb_fb->analog, &hb_ctrl->out_faults);
-
-	// Check if any enabled fault is active
-	uint8_t warn_act = warnings_feedback(&hb_ctrl->out_faults, &hb_ctrl->out_faults_en, &hb_fb->warnings);
-	uint8_t fault_act = faults_feedback(&hb_ctrl->out_faults, &hb_ctrl->out_faults_en, &hb_fb->faults);
-
-	// Process fuse state
-	uint8_t fuse_act = fuse_process(&hb_ctrl->out_fuse, fault_act, &hb_ctrl->out_fuse_cfg);
-
-	// Copy feedback data
-	hb_fb->enabled = hb_ctrl->enabled;
-	hb_fb->warning_act = warn_act;
-	hb_fb->fault_act = fault_act;
-	hb_fb->fused = fuse_act;
-
-	return fuse_act;
-}
-
-// Fault logic functions
-static void faults_chs_reset(hb_fault_chs_t* ch_list)
-{
-	// Zero all channels
-	ch_list->sup_uvp = 0;
-	ch_list->sup_ovp = 0;
-	ch_list->sup_ocp = 0;
-	ch_list->sup_opp = 0;
-	ch_list->out_ovp = 0;
-	ch_list->out_ocp = 0;
-	ch_list->out_opp = 0;
-	ch_list->out_short = 0;
-	ch_list->out_open = 0;
-}
-
-static void faults_init(hb_faults_t* faults, hb_fault_chs_t* en_list)
-{
-	// Init state
-	fault_reset(&faults->sup_uvp);
-	fault_reset(&faults->sup_ovp);
-	fault_reset(&faults->sup_ocp);
-	fault_reset(&faults->sup_opp);
-	fault_reset(&faults->out_ovp);
-	fault_reset(&faults->out_ocp);
-	fault_reset(&faults->out_opp);
-	fault_reset(&faults->out_short);
-	fault_reset(&faults->out_open);
-
-	// Init enabled channels
-	faults_chs_reset(en_list);
-	en_list->sup_ocp = 1;
-	en_list->out_ocp = 1;
-	en_list->out_short = 1;
-}
-
-static void faults_logic(hb_meas_t* measurements, hb_faults_t* faults)
-{
-	uint8_t w_trig = 0;
-	uint8_t f_trig = 0;
-
-	fault_cfg_t fault_cfg;
-	fault_cfg.delay = FAULT_DELAY;
-	fault_cfg.wtof = WTOF_DELAY;
-
-	// Check supply voltage
-	w_trig = is_outside(measurements->sup_voltage, SUPPLY_VOLT_MIN_W, 0);
-	f_trig = is_outside(measurements->sup_voltage, SUPPLY_VOLT_MIN_F, 0);
-	fault_process(&faults->sup_uvp, w_trig, f_trig, &fault_cfg);
-
-	w_trig = is_outside(measurements->sup_voltage, 0, SUPPLY_VOLT_MAX_W);
-	f_trig = is_outside(measurements->sup_voltage, 0, SUPPLY_VOLT_MAX_F);
-	fault_process(&faults->sup_ovp, w_trig, f_trig, &fault_cfg);
-
-	// Check supply current
-	w_trig = is_outside(measurements->sup_current, 0, SUPPLY_CURRENT_MAX_W);
-	f_trig = is_outside(measurements->sup_current, 0, SUPPLY_CURRENT_MAX_F);
-	fault_process(&faults->sup_ocp, w_trig, f_trig, &fault_cfg);
-
-	// Check supply power
-	w_trig = is_outside(measurements->sup_power, 0, SUPPLY_POWER_MAX_W);
-	f_trig = is_outside(measurements->sup_power, 0, SUPPLY_POWER_MAX_F);
-	fault_process(&faults->sup_opp, w_trig, f_trig, &fault_cfg);
-
-	// Check output voltage
-	w_trig = is_outside(measurements->out_voltage, 0, OUT_VOLTAGE_MAX_W);
-	f_trig = is_outside(measurements->out_voltage, 0, OUT_VOLTAGE_MAX_F);
-	fault_process(&faults->out_ovp, w_trig, f_trig, &fault_cfg);
-
-	// Check output current
-	w_trig = is_outside(measurements->out_current, 0, OUT_CURRENT_MAX_W);
-	f_trig = is_outside(measurements->out_current, 0, OUT_CURRENT_MAX_F);
-	fault_process(&faults->out_ocp, w_trig, f_trig, &fault_cfg);
-
-	// Check output power
-	w_trig = is_outside(measurements->out_power, 0, OUT_POWER_MAX_W);
-	f_trig = is_outside(measurements->out_power, 0, OUT_POWER_MAX_F);
-	fault_process(&faults->out_opp, w_trig, f_trig, &fault_cfg);
-
-	// Check output resistance
-	w_trig = is_outside(measurements->out_impedance, OUT_RESISTANCE_MIN_W, 0);
-	f_trig = is_outside(measurements->out_impedance, OUT_RESISTANCE_MIN_F, 0);
-	fault_process(&faults->out_short, w_trig, f_trig, &fault_cfg);
-
-	w_trig = is_outside(measurements->out_impedance, 0, OUT_RESISTANCE_MAX_W);
-	f_trig = is_outside(measurements->out_impedance, 0, OUT_RESISTANCE_MAX_F);
-	fault_process(&faults->out_open, w_trig, f_trig, &fault_cfg);
-}
-
-static uint8_t warnings_feedback(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list)
-{
-	return faults_check(faults, en_list, fb_list, FAULT_LVL_WARNING);
-}
-
-static uint8_t faults_feedback(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list)
-{
-	return faults_check(faults, en_list, fb_list, FAULT_LVL_FAULT);
-}
-
-// Utilities
-static uint8_t is_outside(uint16_t meas, uint16_t min, uint16_t max)
-{
-	if((meas < min)||((max!=0)&&(meas > max))) return 1;
-	else return 0;
-}
-
-static uint8_t faults_check(hb_faults_t* faults, hb_fault_chs_t* en_list, hb_fault_chs_t* fb_list, fault_lvl_t check)
-{
-	if((en_list->sup_uvp)&&(faults->sup_uvp.severity == check)) fb_list->sup_uvp = 1;
-	if((en_list->sup_ovp)&&(faults->sup_ovp.severity == check)) fb_list->sup_ovp = 1;
-	if((en_list->sup_ocp)&&(faults->sup_ocp.severity == check)) fb_list->sup_ocp = 1;
-	if((en_list->sup_opp)&&(faults->sup_opp.severity == check)) fb_list->sup_opp = 1;
-	if((en_list->out_ovp)&&(faults->out_ovp.severity == check)) fb_list->out_ovp = 1;
-	if((en_list->out_ocp)&&(faults->out_ocp.severity == check)) fb_list->out_ocp = 1;
-	if((en_list->out_opp)&&(faults->out_opp.severity == check)) fb_list->out_opp = 1;
-	if((en_list->out_short)&&(faults->out_short.severity == check)) fb_list->out_short = 1;
-	if((en_list->out_open)&&(faults->out_open.severity == check)) fb_list->out_open = 1;
-
-	return faults_is_any(fb_list);
-}
-
-static uint8_t faults_is_any(hb_fault_chs_t* fb_list)
-{
-	if(fb_list->sup_uvp) return 1;
-	if(fb_list->sup_ovp) return 1;
-	if(fb_list->sup_ocp) return 1;
-	if(fb_list->sup_opp) return 1;
-	if(fb_list->out_ovp) return 1;
-	if(fb_list->out_ocp) return 1;
-	if(fb_list->out_opp) return 1;
-	if(fb_list->out_short) return 1;
-	if(fb_list->out_open) return 1;
-
-	return 0;
-}
-
-#ifdef TESTING
-uint8_t hb_is_equal_fb_struct(hb_feedback_t* f1, hb_feedback_t* f2)
-{
-	if(f1->analog.out_voltage   != f2->analog.out_voltage   ) return 0;
-	if(f1->analog.out_current   != f2->analog.out_current   ) return 0;
-	if(f1->analog.sup_voltage   != f2->analog.sup_voltage   ) return 0;
-	if(f1->analog.sup_current   != f2->analog.sup_current   ) return 0;
-	if(f1->analog.out_power     != f2->analog.out_power     ) return 0;
-	if(f1->analog.sup_power     != f2->analog.sup_power     ) return 0;
-	if(f1->analog.out_impedance != f2->analog.out_impedance ) return 0;
-	if(f1->analog.low_side_ctrl != f2->analog.low_side_ctrl ) return 0;
-	if(f1->analog.pwm           != f2->analog.pwm           ) return 0;
-	if(f1->enabled              != f2->enabled              ) return 0;
-	if(f1->warning_act          != f2->warning_act          ) return 0;
-	if(f1->fault_act            != f2->fault_act            ) return 0;
-	if(f1->fused                != f2->fused                ) return 0;
-	if(f1->warnings.sup_uvp     != f2->warnings.sup_uvp     ) return 0;
-	if(f1->warnings.sup_ovp     != f2->warnings.sup_ovp     ) return 0;
-	if(f1->warnings.sup_ocp     != f2->warnings.sup_ocp     ) return 0;
-	if(f1->warnings.sup_opp     != f2->warnings.sup_opp     ) return 0;
-	if(f1->warnings.out_ovp     != f2->warnings.out_ovp     ) return 0;
-	if(f1->warnings.out_ocp     != f2->warnings.out_ocp     ) return 0;
-	if(f1->warnings.out_opp     != f2->warnings.out_opp     ) return 0;
-	if(f1->warnings.out_short   != f2->warnings.out_short   ) return 0;
-	if(f1->warnings.out_open    != f2->warnings.out_open    ) return 0;
-	if(f1->faults.sup_uvp       != f2->faults.sup_uvp       ) return 0;
-	if(f1->faults.sup_ovp       != f2->faults.sup_ovp       ) return 0;
-	if(f1->faults.sup_ocp       != f2->faults.sup_ocp       ) return 0;
-	if(f1->faults.sup_opp       != f2->faults.sup_opp       ) return 0;
-	if(f1->faults.out_ovp       != f2->faults.out_ovp       ) return 0;
-	if(f1->faults.out_ocp       != f2->faults.out_ocp       ) return 0;
-	if(f1->faults.out_opp       != f2->faults.out_opp       ) return 0;
-	if(f1->faults.out_short     != f2->faults.out_short     ) return 0;
-	if(f1->faults.out_open      != f2->faults.out_open      ) return 0;
-
-	return 1;
-}
-
-uint8_t hb_is_equal_ctrl_struct(hb_control_t* c1, hb_control_t* c2)
-{
-	if(c1->enabled                       != c2->enabled                       ) return 0;
-	if(c1->out_faults.sup_uvp.severity   != c2->out_faults.sup_uvp.severity   ) return 0;
-	if(c1->out_faults.sup_uvp.w_time     != c2->out_faults.sup_uvp.w_time     ) return 0;
-	if(c1->out_faults.sup_uvp.f_time     != c2->out_faults.sup_uvp.f_time     ) return 0;
-	if(c1->out_faults.sup_ovp.severity   != c2->out_faults.sup_ovp.severity   ) return 0;
-	if(c1->out_faults.sup_ovp.w_time     != c2->out_faults.sup_ovp.w_time     ) return 0;
-	if(c1->out_faults.sup_ovp.f_time     != c2->out_faults.sup_ovp.f_time     ) return 0;
-	if(c1->out_faults.sup_ocp.severity   != c2->out_faults.sup_ocp.severity   ) return 0;
-	if(c1->out_faults.sup_ocp.w_time     != c2->out_faults.sup_ocp.w_time     ) return 0;
-	if(c1->out_faults.sup_ocp.f_time     != c2->out_faults.sup_ocp.f_time     ) return 0;
-	if(c1->out_faults.sup_opp.severity   != c2->out_faults.sup_opp.severity   ) return 0;
-	if(c1->out_faults.sup_opp.w_time     != c2->out_faults.sup_opp.w_time     ) return 0;
-	if(c1->out_faults.sup_opp.f_time     != c2->out_faults.sup_opp.f_time     ) return 0;
-	if(c1->out_faults.out_ovp.severity   != c2->out_faults.out_ovp.severity   ) return 0;
-	if(c1->out_faults.out_ovp.w_time     != c2->out_faults.out_ovp.w_time     ) return 0;
-	if(c1->out_faults.out_ovp.f_time     != c2->out_faults.out_ovp.f_time     ) return 0;
-	if(c1->out_faults.out_ocp.severity   != c2->out_faults.out_ocp.severity   ) return 0;
-	if(c1->out_faults.out_ocp.w_time     != c2->out_faults.out_ocp.w_time     ) return 0;
-	if(c1->out_faults.out_ocp.f_time     != c2->out_faults.out_ocp.f_time     ) return 0;
-	if(c1->out_faults.out_opp.severity   != c2->out_faults.out_opp.severity   ) return 0;
-	if(c1->out_faults.out_opp.w_time     != c2->out_faults.out_opp.w_time     ) return 0;
-	if(c1->out_faults.out_opp.f_time     != c2->out_faults.out_opp.f_time     ) return 0;
-	if(c1->out_faults.out_short.severity != c2->out_faults.out_short.severity ) return 0;
-	if(c1->out_faults.out_short.w_time   != c2->out_faults.out_short.w_time   ) return 0;
-	if(c1->out_faults.out_short.f_time   != c2->out_faults.out_short.f_time   ) return 0;
-	if(c1->out_faults.out_open.severity  != c2->out_faults.out_open.severity  ) return 0;
-	if(c1->out_faults.out_open.w_time    != c2->out_faults.out_open.w_time    ) return 0;
-	if(c1->out_faults.out_open.f_time    != c2->out_faults.out_open.f_time    ) return 0;
-	if(c1->out_faults_en.sup_uvp         != c2->out_faults_en.sup_uvp         ) return 0;
-	if(c1->out_faults_en.sup_ovp         != c2->out_faults_en.sup_ovp         ) return 0;
-	if(c1->out_faults_en.sup_ocp         != c2->out_faults_en.sup_ocp         ) return 0;
-	if(c1->out_faults_en.sup_opp         != c2->out_faults_en.sup_opp         ) return 0;
-	if(c1->out_faults_en.out_ovp         != c2->out_faults_en.out_ovp         ) return 0;
-	if(c1->out_faults_en.out_ocp         != c2->out_faults_en.out_ocp         ) return 0;
-	if(c1->out_faults_en.out_opp         != c2->out_faults_en.out_opp         ) return 0;
-	if(c1->out_faults_en.out_short       != c2->out_faults_en.out_short       ) return 0;
-	if(c1->out_faults_en.out_open        != c2->out_faults_en.out_open        ) return 0;
-	if(c1->out_fuse.state                != c2->out_fuse.state                ) return 0;
-	if(c1->out_fuse.count                != c2->out_fuse.count                ) return 0;
-	if(c1->out_fuse.timer                != c2->out_fuse.timer                ) return 0;
-	if(c1->out_fuse_cfg.cooldown_time    != c2->out_fuse_cfg.cooldown_time    ) return 0;
-	if(c1->out_fuse_cfg.retry_time       != c2->out_fuse_cfg.retry_time       ) return 0;
-
-	return 1;
-}
-#endif

firmware/src/hw/hb_control.h

@@ -1,67 +0,0 @@
-#ifndef HB_CONTROL_H_
-#define HB_CONTROL_H_
-
-/**** Includes ****/
-#include <stdint.h>
-#include "board/utils/faults.h"
-#include "board/utils/fuses.h"
-#include "board/halfbridge.h"
-#include "config.h"
-
-/**** Public definitions ****/
-typedef struct {
-	fault_t sup_uvp;
-	fault_t sup_ovp;
-	fault_t sup_ocp;
-	fault_t sup_opp;
-	fault_t out_ovp;
-	fault_t out_ocp;
-	fault_t out_opp;
-	fault_t out_short;
-	fault_t out_open;
-} hb_faults_t;
-
-typedef struct {
-	uint8_t sup_uvp;
-	uint8_t sup_ovp;
-	uint8_t sup_ocp;
-	uint8_t sup_opp;
-	uint8_t out_ovp;
-	uint8_t out_ocp;
-	uint8_t out_opp;
-	uint8_t out_short;
-	uint8_t out_open;
-} hb_fault_chs_t;
-
-typedef struct {
-	hb_meas_t analog;
-	uint8_t enabled;
-	uint8_t warning_act;
-	uint8_t fault_act;
-	uint8_t fused;
-	hb_fault_chs_t warnings;
-	hb_fault_chs_t faults;
-} hb_feedback_t;
-
-typedef struct {
-	uint8_t enabled;
-	hb_faults_t out_faults;
-	hb_fault_chs_t out_faults_en;
-	fuse_t out_fuse;
-	fuse_cfg_t out_fuse_cfg;
-} hb_control_t;
-
-/**** Public function declarations ****/
-void hb_init(hb_feedback_t* hb_fb, hb_control_t* hb_ctrl);
-
-void hb_enable(hb_control_t* hb_ctrl);
-void hb_disable(hb_control_t* hb_ctrl);
-
-void hb_process(int16_t target, hb_feedback_t* hb_fb, hb_control_t* hb_ctrl);
-
-#ifdef TESTING
-uint8_t hb_is_equal_fb_struct(hb_feedback_t* f1, hb_feedback_t* f2);
-uint8_t hb_is_equal_ctrl_struct(hb_control_t* c1, hb_control_t* c2);
-#endif
-
-#endif /* HB_CONTROL_H_ */

firmware/src/hw/led_display.c

@@ -1,38 +0,0 @@
-/**** Includes ****/
-#include "board/odout.h"
-#include "led_display.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-
-/**** Public function definitions ****/
-void led_dsp_set_image(uint8_t image)
-{
-	if(image&0x01) bsp_odout_write(BSP_OD1, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD1, BSP_ODOUT_HIZ);
-	
-	if(image&0x02) bsp_odout_write(BSP_OD2, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD2, BSP_ODOUT_HIZ);
-	
-	if(image&0x04) bsp_odout_write(BSP_OD3, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD3, BSP_ODOUT_HIZ);
-	
-	if(image&0x08) bsp_odout_write(BSP_OD4, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD4, BSP_ODOUT_HIZ);
-	
-	if(image&0x10) bsp_odout_write(BSP_OD5, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD5, BSP_ODOUT_HIZ);
-	
-	if(image&0x20) bsp_odout_write(BSP_OD6, BSP_ODOUT_LOW);
-	else bsp_odout_write(BSP_OD6, BSP_ODOUT_HIZ);
-}
-
-void led_dsp_backligth_set(uint8_t percent)
-{
-	bsp_odout_write_common(percent);
-}
-
-/**** Private function definitions ****/
-

firmware/src/hw/led_display.h

@@ -1,19 +0,0 @@
-#ifndef LED_DISPLAY_H_
-#define LED_DISPLAY_H_
-
-/*
-*/
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-
-/**** Public function declarations ****/
-void led_dsp_set_image(uint8_t image);
-void led_dsp_backligth_set(uint8_t percent);
-
-#ifdef TESTING
-#endif
-
-#endif /* LED_DISPLAY_H_ */

firmware/src/hw/potentiometer.cpp

@@ -0,0 +1,38 @@
+/**** Includes ****/
+#include "../utils/utils.h"
+#include "../utils/interpolate.h"
+#include "potentiometer.h"
+
+using namespace hw;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+
+/**** Public function definitions ****/
+hw::Potentiometer::Potentiometer(board::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone)
+{
+	this->ain_ch = ain_ch;
+	this->low_deadzone = low_deadzone;
+	this->high_deadzone = high_deadzone;
+	this->percent = 0;
+}
+
+hw::Potentiometer::~Potentiometer(void)
+{
+	return;
+}
+
+uint8_t hw::Potentiometer::read(void)
+{
+	// Update input
+	this->ain_ch->read();
+	
+	// Calculate percent
+	this->percent = util::interpolate(this->ain_ch->last_read, this->low_deadzone, this->high_deadzone, 0, 100);
+	
+	return this->percent;
+}
+
+/**** Private function definitions ****/

firmware/src/hw/potentiometer.h

@@ -0,0 +1,35 @@
+#ifndef POTENTIOMETER_H_
+#define POTENTIOMETER_H_
+
+/**** Includes ****/
+#include <stdint.h>
+#include "../board/ain.h"
+
+namespace hw {
+
+/**** Public definitions ****/
+
+class Potentiometer
+{
+	protected:
+	board::AnalogIn* ain_ch;
+	
+	public:
+	Potentiometer(board::AnalogIn* ain_ch, uint16_t low_deadzone, uint16_t high_deadzone);
+	~Potentiometer(void);
+	
+	uint16_t low_deadzone;
+	uint16_t high_deadzone;
+	uint8_t percent;
+	
+	uint8_t read(void);
+};
+
+/**** Public function declarations ****/
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* POTENTIOMETER_H_ */

firmware/src/hw/startup.c

@@ -1,16 +0,0 @@
-/**** Includes ****/
-#include "board/utils/utils.h"
-#include "board/setup.h"
-#include "startup.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-void hw_startup(void)
-{
-	bsp_startup();
-}
-
-/**** Private function definitions ****/

firmware/src/hw/startup.h

@@ -1,14 +0,0 @@
-#ifndef HW_STARTUP_H_
-#define HW_STARTUP_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-/**** Public function declarations ****/
-void hw_startup(void);
-
-#ifdef TESTING
-#endif
-
-#endif /* HW_STARTUP_H_ */

firmware/src/logic/coil.c

@@ -1,41 +0,0 @@
-/**** Includes ****/
-#include "coil.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-static const int16_t TARGET_HANDBRAKE = COIL_TARGET_HANDBRAKE;
-static const int16_t LOCK_VOLTAGE = COIL_LOCK_VOLTAGE;
-
-/**** Private variables ****/
-/**** Private function declarations ****/
-
-/**** Public function definitions ****/
-int16_t coil_target(uint8_t force, uint8_t hbrake_act)
-{
-	if(hbrake_act)
-    {
-        return TARGET_HANDBRAKE;
-    }
-	else if(force==0)
-	{
-		return 0;
-	}
-	else if(force >= 100)
-	{
-		return LOCK_VOLTAGE;
-	}
-	else
-	{
-		// Calculate target
-		uint32_t t = (uint32_t)force * LOCK_VOLTAGE;
-		t /= 100;
-		if(t > LOCK_VOLTAGE) return LOCK_VOLTAGE;
-		else if(t < 0) return 0;
-		else return (int16_t)t;
-	}
-
-	return 0;
-}
-
-/**** Private function definitions ****/
-

firmware/src/logic/coil.h

@@ -1,17 +0,0 @@
-#ifndef COIL_H_
-#define COIL_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define COIL_TARGET_HANDBRAKE	-1
-#define COIL_LOCK_VOLTAGE		6500
-
-/**** Public function declarations ****/
-int16_t coil_target(uint8_t force, uint8_t hbrake_act);
-
-#ifdef TESTING
-#endif
-
-#endif /* COIL_H_ */

firmware/src/logic/display.c

@@ -1,108 +0,0 @@
-/**** Includes ****/
-#include "display.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-static const uint8_t BACKLIGHT_DIMM = DSP_BACKLIGHT_DIMM_PERCENT;
-static const uint8_t BACKLIGHT_BRIGTH = DSP_BACKLIGHT_BRIGTH_PERCENT;
-
-/**** Private variables ****/
-/**** Private function declarations ****/
-static uint8_t img_gen_dot10(uint8_t percent);
-static uint8_t img_gen_dot20(uint8_t percent);
-static uint8_t img_gen_bar(uint8_t percent);
-
-/**** Public function definitions ****/
-void dsp_init_ctrl(dsp_ctrl_t* ctrl)
-{
-	ctrl->img_lock = 0;
-	ctrl->act_img = 0x00;
-}
-
-void dsp_set_lock(dsp_ctrl_t* ctrl)
-{
-	ctrl->img_lock = 1;
-}
-
-void dsp_reset_lock(dsp_ctrl_t* ctrl)
-{
-	ctrl->img_lock = 0;
-}
-
-uint8_t dsp_img_percent(uint8_t value, dsp_style_t style, dsp_ctrl_t* ctrl)
-{
-	if(ctrl->img_lock) return ctrl->act_img;
-	
-	switch(style)
-	{
-		case LED_DSP_BAR:
-		ctrl->act_img = img_gen_bar(value);
-		break;
-		
-		case LED_DSP_DOT10:
-		ctrl->act_img = img_gen_dot10(value);
-		break;
-		
-		default:
-		ctrl->act_img = img_gen_dot20(value);
-		break;
-	}
-	
-	return ctrl->act_img;
-}
-
-uint8_t dsp_img_raw(uint8_t image, dsp_ctrl_t* ctrl)
-{
-	if(ctrl->img_lock) return ctrl->act_img;
-	
-	ctrl->act_img = image & 0x3F;
-	
-	return ctrl->act_img;
-}
-
-uint8_t dsp_get_act_img(dsp_ctrl_t* ctrl)
-{
-	return ctrl->act_img;
-}
-
-uint8_t dsp_backlight(uint8_t dimm_act)
-{
-	if(dimm_act) return BACKLIGHT_DIMM;
-	else return BACKLIGHT_BRIGTH;
-}
-
-/**** Private function definitions ****/
-static uint8_t img_gen_dot10(uint8_t percent)
-{
-	if(percent<6) return 0x01;
-	else if(percent<16) return 0x03;
-	else if(percent<26) return 0x02;
-	else if(percent<36) return 0x06;
-	else if(percent<46) return 0x04;
-	else if(percent<56) return 0x0C;
-	else if(percent<66) return 0x08;
-	else if(percent<76) return 0x18;
-	else if(percent<86) return 0x10;
-	else if(percent<96) return 0x30;
-	else return 0x20;
-}
-
-static uint8_t img_gen_dot20(uint8_t percent)
-{
-	if(percent<11) return 0x01;
-	else if(percent<31) return 0x02;
-	else if(percent<51) return 0x04;
-	else if(percent<71) return 0x08;
-	else if(percent<91) return 0x10;
-	else return 0x20;
-}
-
-static uint8_t img_gen_bar(uint8_t percent)
-{
-	if(percent<11) return 0x01;
-	else if(percent<31) return 0x03;
-	else if(percent<51) return 0x07;
-	else if(percent<71) return 0x0F;
-	else if(percent<91) return 0x1F;
-	else return 0x3F;
-}

firmware/src/logic/display.h

@@ -1,37 +0,0 @@
-#ifndef LOGIC_DISPLAY_H_
-#define LOGIC_DISPLAY_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define DSP_BACKLIGHT_DIMM_PERCENT		50
-#define DSP_BACKLIGHT_BRIGTH_PERCENT	100
-
-typedef enum {
-	LED_DSP_DOT20,
-	LED_DSP_DOT10,
-	LED_DSP_BAR
-} dsp_style_t;
-
-typedef struct {
-	uint8_t img_lock;
-	uint8_t act_img;
-} dsp_ctrl_t;
-
-/**** Public function declarations ****/
-void dsp_init_ctrl(dsp_ctrl_t* ctrl);
-
-void dsp_set_lock(dsp_ctrl_t* ctrl);
-void dsp_reset_lock(dsp_ctrl_t* ctrl);
-
-uint8_t dsp_img_percent(uint8_t value, dsp_style_t style, dsp_ctrl_t* ctrl);
-uint8_t dsp_img_raw(uint8_t image, dsp_ctrl_t* ctrl);
-uint8_t dsp_get_act_img(dsp_ctrl_t* ctrl);
-
-uint8_t dsp_backlight(uint8_t dimm_act);
-
-#ifdef TESTING
-#endif
-
-#endif /* LOGIC_DISPLAY_H_ */

firmware/src/logic/force.c

@@ -1,63 +0,0 @@
-/**** Includes ****/
-#include "force.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-static const uint16_t MAX_HBRAKE_HOLD_TIME = FORCE_MAX_HBRAKE_HOLD_TIME;
-
-/**** Private variables ****/
-/**** Private function declarations ****/
-
-/**** Public function definitions ****/
-#ifdef TESTING
-#endif
-
-uint8_t force_next(uint8_t handbrake, uint8_t brakes, fbrake_mode_t bmode, uint8_t user_force, uint16_t hbarke_act_time)
-{
-	// Do force logic
-	if((handbrake)&&(hbarke_act_time < MAX_HBRAKE_HOLD_TIME))
-	{
-		return 0;
-	}
-	else if(brakes)
-	{
-		switch(bmode)
-		{
-			case FORCE_BMODE_KEEP:
-			return user_force;
-			break;
-			
-			case FORCE_BMODE_LOCK:
-			return 100;
-			break;
-			
-			default: //FORCE_BMODE_OPEN
-			return 0;
-			break;
-		}
-	}
-	else
-	{
-		return user_force;
-	}
-	
-	return 0;
-}
-
-fbrake_mode_t force_cycle_bmode(fbrake_mode_t bmode)
-{
-	switch(bmode)
-	{
-		case FORCE_BMODE_OPEN:
-		return FORCE_BMODE_KEEP;
-		
-		case FORCE_BMODE_KEEP:
-		return FORCE_BMODE_LOCK;
-		
-		default:
-		return FORCE_BMODE_OPEN;
-	}
-}
-
-/**** Private function definitions ****/
-

firmware/src/logic/force.h

@@ -1,23 +0,0 @@
-#ifndef FORCE_H_
-#define FORCE_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define FORCE_MAX_HBRAKE_HOLD_TIME	1000
-
-typedef enum {
-	FORCE_BMODE_OPEN,
-	FORCE_BMODE_KEEP,
-	FORCE_BMODE_LOCK
-} fbrake_mode_t;
-
-/**** Public function declarations ****/
-uint8_t force_next(uint8_t handbrake, uint8_t brakes, fbrake_mode_t bmode, uint8_t user_force, uint16_t hbarke_act_time);
-fbrake_mode_t force_cycle_bmode(fbrake_mode_t bmode);
-
-#ifdef TESTING
-#endif
-
-#endif /* FORCE_H_ */

firmware/src/logic/pot.c

@@ -1,42 +0,0 @@
-/**** Includes ****/
-#include "pot.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-#ifdef TESTING
-#endif
-
-uint8_t pot_mv_to_percent(uint16_t value, pot_cfg_t* cfg)
-{
-	// Setup limits
-	uint16_t bottom = 0;
-	uint16_t top = cfg->reference;
-	
-	// Adjust for top and bottom deadband
-	if(bottom < cfg->deadband) bottom = cfg->deadband;
-	if(top > cfg->deadband) top -= cfg->deadband;
-	
-	// Calculate percent
-	if(value <= bottom) return 0;
-	else if(value >= top) return 100;
-	else
-	{
-		// Adjust values for offset
-		if(bottom)
-		{
-			value = value - bottom;
-			top = top - bottom;
-		};
-		
-		uint32_t y = (uint32_t)value * 100;
-		y = y/(uint32_t)top;
-		
-		return (uint16_t)y;
-	}
-}
-
-/**** Private function definitions ****/
-

firmware/src/logic/pot.h

@@ -1,19 +0,0 @@
-#ifndef POTENTIOMETER_H_
-#define POTENTIOMETER_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-typedef struct {
-	uint16_t reference;
-	uint16_t deadband;
-} pot_cfg_t;
-
-/**** Public function declarations ****/
-uint8_t pot_mv_to_percent(uint16_t value, pot_cfg_t* cfg);
-
-#ifdef TESTING
-#endif
-
-#endif /* POTENTIOMETER_H_ */

firmware/src/logic/user_force.c

@@ -1,52 +0,0 @@
-/**** Includes ****/
-#include "user_force.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-static const uint8_t MAX_PERCENT = USER_FORCE_MAX_PERCENT;
-static const uint8_t MIN_PERCENT = USER_FORCE_MIN_PERCENT;
-
-/**** Private variables ****/
-/**** Private function declarations ****/
-/**** Public function definitions ****/
-#ifdef TESTING
-#endif
-
-uint8_t user_force_btn(uint8_t prev_force, uint8_t up_act, uint8_t down_act, uint8_t delta)
-{
-	uint8_t new_froce = prev_force;
-	
-	if(up_act)
-	{
-		new_froce = prev_force + delta;
-		// Limit overflow and top value
-		if(new_froce < prev_force) new_froce = 100;
-		else if(new_froce < MIN_PERCENT) new_froce = MIN_PERCENT;
-	};
-	
-	if(down_act)
-	{
-		new_froce = prev_force - delta;
-		// Limit overflow and top value
-		if(new_froce > prev_force) new_froce = 0;
-		else if(new_froce > MAX_PERCENT) new_froce = MAX_PERCENT;
-	};
-	
-	// Do deadband
-	if(new_froce < MIN_PERCENT) new_froce = 0;
-	else if(new_froce > MAX_PERCENT) new_froce = 100;
-	
-	return new_froce;
-}
-
-uint8_t user_force_pot(uint8_t prev_force, uint8_t pot, uint8_t hyst)
-{
-	uint8_t new_froce = pot;
-	
-	if(new_froce < MIN_PERCENT) new_froce = 0;
-	else if(new_froce > MAX_PERCENT) new_froce = 100;
-	
-	return new_froce;
-}
-
-/**** Private function definitions ****/

firmware/src/logic/user_force.h

@@ -1,18 +0,0 @@
-#ifndef USER_FORCE_H_
-#define USER_FORCE_H_
-
-/**** Includes ****/
-#include <stdint.h>
-
-/**** Public definitions ****/
-#define USER_FORCE_MAX_PERCENT	90
-#define USER_FORCE_MIN_PERCENT	10
-
-/**** Public function declarations ****/
-uint8_t user_force_btn(uint8_t prev_force, uint8_t up_act, uint8_t down_act, uint8_t delta);
-uint8_t user_force_pot(uint8_t prev_force, uint8_t pot, uint8_t hyst);
-
-#ifdef TESTING
-#endif
-
-#endif /* USER_FORCE_H_ */

firmware/src/main.c

@@ -1,127 +0,0 @@
-/**** Includes ****/
-#include <stdint.h>
-
-// Hardware IO
-#include "hw/startup.h"
-#include "hw/analog.h"
-#include "hw/buttons.h"
-#include "hw/hb_control.h"
-#include "hw/led_display.h"
-
-// Logic blocks
-#include "logic/coil.h"
-#include "logic/display.h"
-#include "logic/force.h"
-#include "logic/pot.h"
-#include "logic/user_force.h"
-
-/**** Private definitions ****/
-/**** Private constants ****/
-/**** Private variables ****/
-static volatile uint8_t user_force = 0;
-static volatile uint8_t user_force_step = 10;
-
-static volatile fbrake_mode_t bmode = FORCE_BMODE_OPEN;
-
-static volatile uint8_t next_force = 0;
-static volatile int16_t next_target = 0;
-
-static volatile hb_feedback_t hb_feedback;
-static volatile hb_control_t hb_ctrl;
-
-static volatile uint8_t backlight = 0;
-static volatile dsp_ctrl_t dsp_logic_ctrl;
-
-/**** Private function declarations ****/
-
-/**** Public function definitions ****/
-int main(void)
-{
-    hw_startup();
-	
-	// Create objects for all buttons
-	btn_t btn_mode;
-	btn_t btn_down;
-	btn_t btn_up;
-	btn_t btn_dimm;
-	btn_t btn_brakes;
-	btn_t btn_handbrake;
-	btn_t btn_handbrake_dir;
-	
-	// Set button pulls
-	//btn_ch_set_pull(BTN_1, BTN_PULL_HIGH);
-	//btn_ch_set_pull(BTN_2, BTN_PULL_HIGH);
-	//btn_ch_set_pull(BTN_3, BTN_PULL_HIGH);
-	btn_ch_set_pull(BTN_6, BTN_PULL_HIGH);
-	
-	// Create object for half-bridge control
-	
-	// Initialize half-bridge
-	hb_init(&hb_feedback, &hb_ctrl);
-	hb_enable(&hb_ctrl);
-	
-	// Init display backlight
-	dsp_init_ctrl(&dsp_logic_ctrl);
-	backlight = dsp_backlight(1);
-	led_dsp_backligth_set(backlight);
-	
-	while(1)
-    {
-		// Read buttons
-		btn_ch_process(BTN_1, &btn_mode);
-		btn_ch_process(BTN_2, &btn_down);
-		btn_ch_process(BTN_3, &btn_up);
-		btn_ch_process(BTN_4, &btn_dimm);
-		btn_ch_process(BTN_5, &btn_brakes);
-		btn_ch_process(BTN_6, &btn_handbrake);
-		btn_ch_process(BTN_6N, &btn_handbrake_dir);
-		
-		// Process user force changes
-		if((btn_up.new_state)||(btn_down.new_state))
-		{
-			uint8_t up_act = btn_up.new_state & btn_up.state;
-			uint8_t down_act = btn_down.new_state & btn_down.state;
-			
-			user_force = user_force_btn(user_force, up_act, down_act, user_force_step);
-			btn_up.new_state = 0;
-			btn_down.new_state = 0;
-		};
-		
-		// Process brake mode changes
-		if(btn_mode.new_state)
-		{
-			if(btn_mode.state) bmode = force_cycle_bmode(bmode);
-			btn_mode.new_state = 0;
-		};
-		
-		// Calculate next force
-		next_force = force_next(btn_handbrake.state, btn_brakes.state, bmode, user_force, btn_handbrake.state_time);
-		
-		// Calculate next coil target
-		next_target = coil_target(next_force, btn_handbrake.state);
-		
-		// Read Half-bridge status and apply next target
-		hb_process(next_target, &hb_feedback, &hb_ctrl);
-		
-		// Generate image of current force
-		uint8_t img = 0x00;
-		
-		if(hb_feedback.fused) img = 0xAA;
-		else img = dsp_img_percent(next_force, LED_DSP_DOT10);
-		
-		// Apply image
-		led_dsp_set_image(img);
-		
-		// Process display backlight
-		if(btn_dimm.new_state)
-		{
-			backlight = dsp_backlight(btn_dimm.state);
-			led_dsp_backligth_set(backlight);
-			btn_dimm.new_state = 0;
-		};
-    }
-	
-	return 0;
-}
-
-/**** Private function definitions ****/

firmware/src/main.cpp

@@ -0,0 +1,43 @@
+/**** Includes ****/
+#include "utils/utils.h"
+
+#include "board/mcu/mcu_hal.h"
+#include "board/ain.h"
+#include "board/din.h"
+#include "board/dout.h"
+#include "board/dio.h"
+#include "board/halfbridge.h"
+#include "board/pwm.h"
+
+#include "hw/button.h"
+#include "hw/potentiometer.h"
+#include "hw/display_led.h"
+
+#include "board/udccd_board.h"
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+/**** Public function definitions ****/
+int main(void)
+{
+	mcu::startupCfg_t mcu_cfg;
+	mcu_cfg.adc_clk = mcu::ADC_DIV2;
+	mcu_cfg.pwm_clk = mcu::TIM_DIV1;
+	mcu_cfg.pwm_top = 200;
+	mcu_cfg.pwm_ch1_en = 1;
+	
+	mcu::startup(&mcu_cfg);
+
+	// Super loop
+	while(1)
+	{				
+		continue; // End of super loop
+	}
+	
+	// Escape the matrix
+	return 0;
+}
+
+/**** Private function definitions ***/

firmware/src/uDCCD.atsln

@@ -3,7 +3,7 @@ Microsoft Visual Studio Solution File, Format Version 12.00
 # Atmel Studio Solution File, Format Version 11.00
 VisualStudioVersion = 14.0.23107.0
 MinimumVisualStudioVersion = 10.0.40219.1
-Project("{54F91283-7BC4-4236-8FF9-10F437C3AD48}") = "uDCCD_Controller", "uDCCD_Controller.cproj", "{DCE6C7E3-EE26-4D79-826B-08594B9AD897}"
+Project("{E66E83B9-2572-4076-B26E-6BE79FF3018A}") = "uDCCD", "uDCCD.cppproj", "{DCE6C7E3-EE26-4D79-826B-08594B9AD897}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution

firmware/src/uDCCD.componentinfo.xml

@@ -41,7 +41,7 @@
 					<Attribute>template</Attribute>
 					<Category>source</Category>
 					<Condition>C Exe</Condition>
-					<FileContentHash>YLr2MkKo6ZooP7MhARWYNA==</FileContentHash>
+					<FileContentHash>KjvOcFWd++tbnsEMfVPd/w==</FileContentHash>
 					<FileVersion></FileVersion>
 					<Name>templates/main.c</Name>
 					<SelectString>Main file (.c)</SelectString>
@@ -52,7 +52,7 @@
 					<Attribute>template</Attribute>
 					<Category>source</Category>
 					<Condition>C Exe</Condition>
-					<FileContentHash>mkKaE95TOoATsuBGv6jmxg==</FileContentHash>
+					<FileContentHash>w5aB/d0+DbxGZ7yY0aMMjw==</FileContentHash>
 					<FileVersion></FileVersion>
 					<Name>templates/main.cpp</Name>
 					<SelectString>Main file (.cpp)</SelectString>

firmware/src/uDCCD.cppproj

@@ -3,63 +3,47 @@
   <PropertyGroup>
     <SchemaVersion>2.0</SchemaVersion>
     <ProjectVersion>7.0</ProjectVersion>
-    <ToolchainName>com.Atmel.AVRGCC8.C</ToolchainName>
+    <ToolchainName>com.Atmel.AVRGCC8.CPP</ToolchainName>
     <ProjectGuid>dce6c7e3-ee26-4d79-826b-08594b9ad897</ProjectGuid>
     <avrdevice>ATmega328PB</avrdevice>
     <avrdeviceseries>none</avrdeviceseries>
     <OutputType>Executable</OutputType>
-    <Language>C</Language>
+    <Language>CPP</Language>
     <OutputFileName>$(MSBuildProjectName)</OutputFileName>
     <OutputFileExtension>.elf</OutputFileExtension>
     <OutputDirectory>$(MSBuildProjectDirectory)\$(Configuration)</OutputDirectory>
-    <AssemblyName>uDCCD_Controller</AssemblyName>
-    <Name>uDCCD_Controller</Name>
-    <RootNamespace>uDCCD_Controller</RootNamespace>
+    <AssemblyName>uDCCD</AssemblyName>
+    <Name>uDCCD</Name>
+    <RootNamespace>uDCCD</RootNamespace>
     <ToolchainFlavour>Native</ToolchainFlavour>
     <KeepTimersRunning>true</KeepTimersRunning>
     <OverrideVtor>false</OverrideVtor>
     <CacheFlash>true</CacheFlash>
     <ProgFlashFromRam>true</ProgFlashFromRam>
-    <RamSnippetAddress>0x20000000</RamSnippetAddress>
+    <RamSnippetAddress />
     <UncachedRange />
     <preserveEEPROM>true</preserveEEPROM>
-    <OverrideVtorValue>exception_table</OverrideVtorValue>
+    <OverrideVtorValue />
     <BootSegment>2</BootSegment>
     <ResetRule>0</ResetRule>
-    <eraseonlaunchrule>1</eraseonlaunchrule>
+    <eraseonlaunchrule>0</eraseonlaunchrule>
     <EraseKey />
     <AsfFrameworkConfig>
-      <framework-data>
+      <framework-data xmlns="">
         <options />
         <configurations />
         <files />
         <documentation help="" />
         <offline-documentation help="" />
         <dependencies>
-          <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.44.1" />
+          <content-extension eid="atmel.asf" uuidref="Atmel.ASF" version="3.52.0" />
         </dependencies>
       </framework-data>
     </AsfFrameworkConfig>
-    <avrtool>com.atmel.avrdbg.tool.atmelice</avrtool>
-    <avrtoolserialnumber>J42700001490</avrtoolserialnumber>
-    <avrdeviceexpectedsignature>0x1E9516</avrdeviceexpectedsignature>
-    <com_atmel_avrdbg_tool_atmelice>
-      <ToolOptions>
-        <InterfaceProperties>
-          <IspClock>125000</IspClock>
-        </InterfaceProperties>
-        <InterfaceName>debugWIRE</InterfaceName>
-      </ToolOptions>
-      <ToolType>com.atmel.avrdbg.tool.atmelice</ToolType>
-      <ToolNumber>J42700001490</ToolNumber>
-      <ToolName>Atmel-ICE</ToolName>
-    </com_atmel_avrdbg_tool_atmelice>
-    <avrtoolinterface>debugWIRE</avrtoolinterface>
-    <avrtoolinterfaceclock>125000</avrtoolinterfaceclock>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)' == 'Release' ">
     <ToolchainSettings>
-      <AvrGcc>
+      <AvrGccCpp>
         <avrgcc.common.Device>-mmcu=atmega328pb -B "%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\gcc\dev\atmega328pb"</avrgcc.common.Device>
         <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
         <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
@@ -82,22 +66,38 @@
         <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
         <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
         <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
-        <avrgcc.linker.libraries.Libraries>
+        <avrgcccpp.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcccpp.compiler.general.ChangeDefaultCharTypeUnsigned>
+        <avrgcccpp.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcccpp.compiler.general.ChangeDefaultBitFieldUnsigned>
+        <avrgcccpp.compiler.symbols.DefSymbols>
           <ListValues>
-            <Value>libm</Value>
+            <Value>NDEBUG</Value>
           </ListValues>
-        </avrgcc.linker.libraries.Libraries>
-        <avrgcc.assembler.general.IncludePaths>
+        </avrgcccpp.compiler.symbols.DefSymbols>
+        <avrgcccpp.compiler.directories.IncludePaths>
           <ListValues>
             <Value>%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\include\</Value>
           </ListValues>
-        </avrgcc.assembler.general.IncludePaths>
-      </AvrGcc>
+        </avrgcccpp.compiler.directories.IncludePaths>
+        <avrgcccpp.compiler.optimization.level>Optimize for size (-Os)</avrgcccpp.compiler.optimization.level>
+        <avrgcccpp.compiler.optimization.PackStructureMembers>True</avrgcccpp.compiler.optimization.PackStructureMembers>
+        <avrgcccpp.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcccpp.compiler.optimization.AllocateBytesNeededForEnum>
+        <avrgcccpp.compiler.warnings.AllWarnings>True</avrgcccpp.compiler.warnings.AllWarnings>
+        <avrgcccpp.linker.libraries.Libraries>
+          <ListValues>
+            <Value>libm</Value>
+          </ListValues>
+        </avrgcccpp.linker.libraries.Libraries>
+        <avrgcccpp.assembler.general.IncludePaths>
+          <ListValues>
+            <Value>%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\include\</Value>
+          </ListValues>
+        </avrgcccpp.assembler.general.IncludePaths>
+      </AvrGccCpp>
     </ToolchainSettings>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)' == 'Debug' ">
     <ToolchainSettings>
-      <AvrGcc>
+      <AvrGccCpp>
         <avrgcc.common.Device>-mmcu=atmega328pb -B "%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\gcc\dev\atmega328pb"</avrgcc.common.Device>
         <avrgcc.common.outputfiles.hex>True</avrgcc.common.outputfiles.hex>
         <avrgcc.common.outputfiles.lss>True</avrgcc.common.outputfiles.lss>
@@ -116,161 +116,133 @@
             <Value>%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\include\</Value>
           </ListValues>
         </avrgcc.compiler.directories.IncludePaths>
+        <avrgcc.compiler.optimization.level>Optimize debugging experience (-Og)</avrgcc.compiler.optimization.level>
         <avrgcc.compiler.optimization.PackStructureMembers>True</avrgcc.compiler.optimization.PackStructureMembers>
         <avrgcc.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcc.compiler.optimization.AllocateBytesNeededForEnum>
         <avrgcc.compiler.optimization.DebugLevel>Default (-g2)</avrgcc.compiler.optimization.DebugLevel>
         <avrgcc.compiler.warnings.AllWarnings>True</avrgcc.compiler.warnings.AllWarnings>
-        <avrgcc.linker.libraries.Libraries>
+        <avrgcccpp.compiler.general.ChangeDefaultCharTypeUnsigned>True</avrgcccpp.compiler.general.ChangeDefaultCharTypeUnsigned>
+        <avrgcccpp.compiler.general.ChangeDefaultBitFieldUnsigned>True</avrgcccpp.compiler.general.ChangeDefaultBitFieldUnsigned>
+        <avrgcccpp.compiler.symbols.DefSymbols>
           <ListValues>
-            <Value>libm</Value>
+            <Value>DEBUG</Value>
           </ListValues>
-        </avrgcc.linker.libraries.Libraries>
-        <avrgcc.assembler.general.IncludePaths>
+        </avrgcccpp.compiler.symbols.DefSymbols>
+        <avrgcccpp.compiler.directories.IncludePaths>
           <ListValues>
             <Value>%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\include\</Value>
           </ListValues>
-        </avrgcc.assembler.general.IncludePaths>
-        <avrgcc.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcc.assembler.debugging.DebugLevel>
-      </AvrGcc>
+        </avrgcccpp.compiler.directories.IncludePaths>
+        <avrgcccpp.compiler.optimization.level>Optimize debugging experience (-Og)</avrgcccpp.compiler.optimization.level>
+        <avrgcccpp.compiler.optimization.PackStructureMembers>True</avrgcccpp.compiler.optimization.PackStructureMembers>
+        <avrgcccpp.compiler.optimization.AllocateBytesNeededForEnum>True</avrgcccpp.compiler.optimization.AllocateBytesNeededForEnum>
+        <avrgcccpp.compiler.optimization.DebugLevel>Default (-g2)</avrgcccpp.compiler.optimization.DebugLevel>
+        <avrgcccpp.compiler.warnings.AllWarnings>True</avrgcccpp.compiler.warnings.AllWarnings>
+        <avrgcccpp.linker.libraries.Libraries>
+          <ListValues>
+            <Value>libm</Value>
+          </ListValues>
+        </avrgcccpp.linker.libraries.Libraries>
+        <avrgcccpp.assembler.general.IncludePaths>
+          <ListValues>
+            <Value>%24(PackRepoDir)\atmel\ATmega_DFP\1.7.374\include\</Value>
+          </ListValues>
+        </avrgcccpp.assembler.general.IncludePaths>
+        <avrgcccpp.assembler.debugging.DebugLevel>Default (-Wa,-g)</avrgcccpp.assembler.debugging.DebugLevel>
+      </AvrGccCpp>
     </ToolchainSettings>
   </PropertyGroup>
   <ItemGroup>
-    <Compile Include="hw\analog.c">
+    <Compile Include="board\ain.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\analog.h">
+    <Compile Include="board\ain.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\config.h">
+    <Compile Include="board\din.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\dout.c">
+    <Compile Include="board\din.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\dout.h">
+    <Compile Include="board\dio.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\setup.c">
+    <Compile Include="board\dio.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\setup.h">
+    <Compile Include="board\halfbridge.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\faults.c">
+    <Compile Include="board\halfbridge.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\faults.h">
+    <Compile Include="board\mcu\mcu_hal.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\fuses.c">
+    <Compile Include="board\mcu\mcu_hal_r8.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\fuses.h">
+    <Compile Include="board\dout.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\buttons.c">
+    <Compile Include="board\dout.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\buttons.h">
+    <Compile Include="board\pwm.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\ain.c">
+    <Compile Include="board\pwm.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\ain.h">
+    <Compile Include="board\udccd_board.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\din.c">
+    <Compile Include="hw\button.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\din.h">
+    <Compile Include="hw\button.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\halfbridge.c">
+    <Compile Include="hw\cv_driver.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\halfbridge.h">
+    <Compile Include="hw\cv_driver.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\mcu\mcu_hal.h">
+    <Compile Include="hw\display_led.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\mcu\mcu_hal_r8.c">
+    <Compile Include="hw\display_led.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\odout.c">
+    <Compile Include="hw\potentiometer.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\odout.h">
+    <Compile Include="hw\potentiometer.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\utils.c">
+    <Compile Include="main.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\board\utils\utils.h">
+    <Compile Include="utils\interpolate.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\config.h">
+    <Compile Include="utils\interpolate.h">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\hb_control.c">
+    <Compile Include="utils\utils.cpp">
       <SubType>compile</SubType>
     </Compile>
-    <Compile Include="hw\hb_control.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="hw\led_display.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="hw\led_display.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="hw\startup.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="hw\startup.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\coil.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\coil.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\display.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\display.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\force.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\force.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\pot.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\pot.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\user_force.c">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="logic\user_force.h">
-      <SubType>compile</SubType>
-    </Compile>
-    <Compile Include="main.c">
+    <Compile Include="utils\utils.h">
       <SubType>compile</SubType>
     </Compile>
   </ItemGroup>
   <ItemGroup>
+    <Folder Include="board" />
+    <Folder Include="board\mcu" />
     <Folder Include="hw" />
-    <Folder Include="hw\board" />
-    <Folder Include="hw\board\mcu" />
-    <Folder Include="hw\board\utils" />
-    <Folder Include="logic" />
+    <Folder Include="utils" />
   </ItemGroup>
   <Import Project="$(AVRSTUDIO_EXE_PATH)\\Vs\\Compiler.targets" />
 </Project>

firmware/src/utils/interpolate.cpp

@@ -0,0 +1,163 @@
+/**** Includes ****/
+#include "utils.h"
+#include "interpolate.h"
+
+using namespace util;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+/**** Public function definitions ****/
+uint16_t util::interpolate_1d(uint16_t x, uint16_t* x_axis, uint16_t* y_values, uint8_t len_axis)
+{
+	// validate axis length
+	if(len_axis==0) return 0;			// Empty data set
+	if(len_axis==1) return y_values[0];	// Only one data point
+
+	uint16_t y;
+
+	uint8_t i = find_interval_end_index(x, x_axis, len_axis);
+	if(i==0)
+	{
+		//Less then start
+		y = y_values[0];
+	}
+	else if(i==len_axis)
+	{
+		//More than end
+		y = y_values[len_axis-1];
+	}
+	else
+	{
+		// Do interpolate
+		y = interpolate(x, x_axis[i-1], x_axis[i], y_values[i-1], y_values[i]);
+	}
+
+	return y;
+}
+
+uint16_t util::interpolate_2d(uint16_t x, uint16_t y, uint16_t* x_axis, uint8_t len_x_axis, uint16_t* y_axis, uint8_t len_y_axis, uint16_t* z_values)
+{
+	// validate axis length
+	if((len_x_axis==0)&&(len_y_axis==0)) return 0;				// Empty data set
+	if((len_x_axis==1)&&(len_y_axis==1)) return z_values[0];	// Only one data point
+
+	uint8_t ix = find_interval_end_index(x, x_axis, len_x_axis);
+	uint8_t iy = find_interval_end_index(y, y_axis, len_y_axis);
+
+	// Check corners - easy answers
+	if((ix==0)&&(iy==0))
+	{
+		return z_values[0];  //[0][0]  [Y][X]
+	}
+	else if((ix==len_x_axis)&&(iy==0))
+	{
+		return z_values[len_x_axis-1]; //[0][end]
+	}
+	else if((ix==0)&&(iy==len_y_axis))
+	{
+		uint16_t i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
+		return z_values[i]; //[end][0]
+	}
+	else if((ix==len_x_axis)&&(iy==len_y_axis))
+	{
+		uint16_t i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
+		return z_values[i];  //[end][end]
+	};
+
+	// Check boundaries - 1D interpolation
+	if(ix==0)
+    {
+        // On ix=0 line
+        uint16_t i = 0;
+        uint16_t z0 = z_values[i];
+        i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
+        uint16_t z1 = z_values[i];
+        return interpolate(y, y_axis[0], y_axis[len_y_axis-1], z0, z1);
+    }
+    else if(ix==len_x_axis)
+    {
+        // On ix=END line
+        uint16_t i = len_x_axis-1;
+        uint16_t z0 = z_values[i];
+        i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
+        uint16_t z1 = z_values[i];
+        return interpolate(y, y_axis[0], y_axis[len_y_axis-1], z0, z1);
+    }
+    else if(iy==0)
+    {
+        // On iy=0 line
+        uint16_t i = 0;
+        uint16_t z0 = z_values[i];
+        i = len_x_axis-1;
+        uint16_t z1 = z_values[i];
+        return interpolate(x, x_axis[0], x_axis[len_x_axis-1], z0, z1);
+    }
+    else if(iy==len_y_axis)
+    {
+        // On iy=END line
+        uint16_t i = index2d_to_index1d(0, len_y_axis-1, len_x_axis);
+        uint16_t z0 = z_values[i];
+        i = index2d_to_index1d(len_x_axis-1, len_y_axis-1, len_x_axis);
+        uint16_t z1 = z_values[i];
+        return interpolate(x, x_axis[0], x_axis[len_x_axis-1], z0, z1);
+    }
+
+	// Do interpolation
+	// Get axis values
+	uint16_t x0 = x_axis[ix-1];
+	uint16_t x1 = x_axis[ix];
+	uint16_t y0 = y_axis[iy-1];
+	uint16_t y1 = y_axis[iy];
+
+	// Do y0 line calculation
+	// Get z values at x0 and x1 points on y0 line
+	uint16_t i = index2d_to_index1d(ix-1, iy-1, len_x_axis);
+	uint16_t z0 = z_values[i];
+	uint16_t z1 = z_values[i+1];
+	// Interpolate z value on y0 line
+	uint16_t zy0 = interpolate(x, x0, x1, z0, z1);
+
+	// Do y1 line calculation
+	// Get z values at x0 and x1 points on y1 line
+	i = index2d_to_index1d(ix-1, iy, len_x_axis);
+	z0 = z_values[i];
+	z1 = z_values[i+1];
+	// Interpolate z value on y0 line
+	uint16_t zy1 = interpolate(x, x0, x1, z0, z1);
+
+	// Do calculation in y axis on xz line
+	return interpolate(y, y0, y1, zy0, zy1);
+}
+
+uint16_t interpolate(uint16_t x, uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1)
+{
+	int32_t dy = (int32_t)y1 - (int32_t)y0;
+	int32_t dx = (int32_t)x1 - (int32_t)x0;
+	int32_t d = (int32_t)x - (int32_t)x0;
+
+	int32_t y = dy * d;
+	y /= dx;
+	y += y0;
+
+	return util::sat_cast(y);
+}
+
+uint8_t find_interval_end_index(uint16_t val, uint16_t* axis_values, uint8_t len_axis)
+{
+	for(uint8_t i=0; i<len_axis; i++)
+	{
+		if(val < axis_values[i]) return i;
+		continue;
+	}
+
+	return len_axis;
+}
+
+uint16_t index2d_to_index1d(uint8_t ix, uint8_t iy, uint8_t len_x)
+{
+	return ((uint16_t)len_x * iy) + ix;
+}
+
+/**** Private function definitions ****/

firmware/src/utils/interpolate.h

@@ -0,0 +1,23 @@
+#ifndef UTILS_INTERPOLATE_H_
+#define UTILS_INTERPOLATE_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace util {
+
+/**** Public definitions ****/
+/**** Public function declarations ****/
+uint16_t interpolate_1d(uint16_t x, uint16_t* x_axis, uint16_t* y_values, uint8_t len_axis);
+uint16_t interpolate_2d(uint16_t x, uint16_t y, uint16_t* x_axis, uint8_t len_x_axis, uint16_t* y_axis, uint8_t len_y_axis, uint16_t* z_values);
+
+uint8_t find_interval_end_index(uint16_t val, uint16_t* axis_values, uint8_t len_axis);
+uint16_t interpolate(uint16_t x, uint16_t x0, uint16_t x1, uint16_t y0, uint16_t y1);
+uint16_t index2d_to_index1d(uint8_t ix, uint8_t iy, uint8_t len_x);
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* UTILS_INTERPOLATE_H_ */

firmware/src/utils/utils.cpp

@@ -0,0 +1,137 @@
+/**** Includes ****/
+#include "utils.h"
+
+using namespace util;
+
+/**** Private definitions ****/
+/**** Private constants ****/
+/**** Private variables ****/
+/**** Private function declarations ****/
+#ifndef TESTING
+#endif
+
+/**** Public function definitions ****/
+uint8_t util::invert(uint8_t x)
+{
+	if(x!=0) return 0;
+	else return 1;
+}
+
+uint8_t util::sat_add(uint8_t x, uint8_t y)
+{
+	uint8_t z = x + y;
+	// Check for overflow
+	if((z < x)||(z < y)) return 0xFF;
+	else return z;
+}
+
+uint16_t util::sat_add(uint16_t x, uint16_t y)
+{
+	uint16_t z = x + y;
+	// Check for overflow
+	if((z < x)||(z < y)) return 0xFF;
+	else return z;
+}
+
+uint32_t util::sat_add(uint32_t x, uint32_t y)
+
+{
+	uint32_t z = x + y;
+	// Check for overflow
+	if((z < x)||(z < y)) return 0xFF;
+	else return z;
+}
+
+uint8_t util::sat_subtract(uint8_t x, uint8_t y)
+{
+	uint8_t z = x - y;
+	// Check for underflow
+	if(z > x) return 0;
+	else return z;
+}
+
+uint16_t util::sat_subtract(uint16_t x, uint16_t y)
+{
+	uint16_t z = x - y;
+	// Check for underflow
+	if(z > x) return 0;
+	else return z;
+}
+
+uint32_t util::sat_subtract(uint32_t x, uint32_t y)
+{
+	uint32_t z = x - y;
+	// Check for underflow
+	if(z > x) return 0;
+	else return z;
+}
+
+uint16_t util::sat_cast(uint32_t x)
+{
+	if(x > 0x0000FFFF) return 0xFFFF;
+	else return (uint16_t)x;
+}
+
+uint16_t util::sat_cast(int32_t x)
+{
+	if(x < 0) return 0x0000;
+	else if(x > 0x0000FFFF) return 0xFFFF;
+	else return (uint16_t)x;
+}
+
+uint16_t util::convert_muldivoff(uint16_t raw, uint8_t mul, uint8_t div, int16_t offset)
+{
+	int32_t temp = (int32_t)raw;
+
+	temp = temp * mul;
+	if(div>1) temp /= div;
+	temp += offset;
+
+	return sat_cast(temp);
+}
+
+uint16_t util::sat_mul_kilo(uint16_t xk, uint16_t yk)
+{
+	uint32_t temp = (uint32_t)xk * (uint32_t)yk;
+	temp /= 1000;
+
+	return sat_cast(temp);
+}
+
+uint16_t util::sat_div_kilo(uint16_t top, uint16_t bot)
+{
+	//Sanity check bot
+	if(bot==0) return 0xFFFF; //aka infinity
+
+	uint32_t temp = (uint32_t)top * 1000;
+	temp /= (uint32_t)bot;
+
+	return sat_cast(temp);
+}
+
+uint16_t util::sat_ratio(uint16_t top, uint16_t bot)
+{
+	//Sanity check bot
+	if(bot==0) return 0xFFFF; //aka infinity
+
+	//Easy option
+	if(top>=bot) return 0xFFFF;
+
+	uint32_t temp = (uint32_t)top * 0x0000FFFF;
+	temp /= (uint32_t)bot;
+
+	return sat_cast(temp);
+}
+
+uint16_t util::percent_to_16b(uint8_t percent)
+{
+	uint32_t temp = (uint32_t)percent * 0x0000FFFF;
+	temp /= 100;
+
+	// Limit to 16 bits
+	uint16_t pwm = sat_cast(temp);
+
+	return pwm;
+}
+
+/**** Private function definitions ****/

firmware/src/utils/utils.h

@@ -0,0 +1,38 @@
+#ifndef UTILS_H_
+#define UTILS_H_
+
+/**** Includes ****/
+#include <stdint.h>
+
+namespace util {
+
+/**** Public definitions ****/
+/**** Public function declarations ****/
+uint8_t invert(uint8_t x);
+
+uint16_t sat_cast(uint32_t x);
+uint16_t sat_cast(int32_t x);
+
+uint16_t convert_muldivoff(uint16_t raw, uint8_t mul, uint8_t div, int16_t offset);
+uint16_t sat_mul_kilo(uint16_t xk, uint16_t yk);
+uint16_t sat_div_kilo(uint16_t top, uint16_t bot);
+uint16_t sat_ratio(uint16_t top, uint16_t bot);
+uint16_t percent_to_16b(uint8_t percent);
+
+uint8_t sat_add(uint8_t x, uint8_t y);
+uint16_t sat_add(uint16_t x, uint16_t y);
+uint32_t sat_add(uint32_t x, uint32_t y);
+
+uint8_t sat_subtract(uint8_t x, uint8_t y);
+uint16_t sat_subtract(uint16_t x, uint16_t y);
+uint32_t sat_subtract(uint32_t x, uint32_t y);
+
+uint16_t interpolate_1d(uint16_t x, uint16_t* x_axis, uint16_t* y_values, uint8_t len_axis);
+uint16_t interpolate_2d(uint16_t x, uint16_t y, uint16_t* x_axis, uint8_t len_x_axis, uint16_t* y_axis, uint8_t len_y_axis, uint16_t* z_values);
+
+#ifdef TESTING
+#endif
+
+} //namespace
+
+#endif /* UTILS_H_ */

firmware/tests/Units_Tests.workspace

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_workspace_file>
-	<Workspace title="Workspace">
-		<Project filename="uDCCD_Unit_Tests_BSP.cbp" />
-		<Project filename="uDCCD_Unit_Tests_HW.cbp" />
-		<Project filename="uDCCD_Unit_Tests_Logic.cbp" />
-	</Workspace>
-</CodeBlocks_workspace_file>

firmware/tests/Units_Tests.workspace.layout

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_workspace_layout_file>
-	<FileVersion major="1" minor="0" />
-	<ActiveProject path="uDCCD_Unit_Tests_Logic.cbp" />
-	<PreferredTarget name="Debug" />
-</CodeBlocks_workspace_layout_file>

firmware/tests/bsp_main.c

@@ -1,147 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "ut_utils/ut_utils.h"
-#include "ut_utils/ut_fault.h"
-#include "ut_utils/ut_fuses.h"
-
-#include "ut_board/ut_ain.h"
-#include "ut_board/ut_din.h"
-#include "ut_board/ut_dout.h"
-#include "ut_board/ut_halfbridge.h"
-#include "ut_board/ut_odout.h"
-#include "ut_board/ut_setup.h"
-
-int main()
-{
-    int tr;
-    int pass = 1;
-
-    /* UTILITIES TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_util_invert_8b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_add_8b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_subtract_8b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_util_sat_add_16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_subtract_16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_limit_u32b_to_u16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_limit_s32b_to_u16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_convert_muldivoff_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_mul_kilo_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_div_kilo_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_sat_ratio_16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_percent_to_16b_test();
-    if(!tr) pass = 0;
-
-    /* FAULT TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_fault_process_test();
-    if(!tr) pass = 0;
-
-    tr = ut_fault_is_active_test();
-    if(!tr) pass = 0;
-
-    tr = ut_fault_is_warning_test();
-    if(!tr) pass = 0;
-
-    tr = ut_fault_reset_test();
-    if(!tr) pass = 0;
-
-    /* FUSE TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_fuse_reset_test();
-    if(!tr) pass = 0;
-
-    /* AIN TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_ain_read_test();
-    if(!tr) pass = 0;
-
-    /* DIN TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_din_read_test();
-    if(!tr) pass = 0;
-
-    /* DOUT TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_dout_write_test();
-    if(!tr) pass = 0;
-
-    /* HALFBRIDGE TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_hb_write_low_test();
-    if(!tr) pass = 0;
-
-    tr = ut_bsp_hb_write_pwm_test();
-    if(!tr) pass = 0;
-
-    tr = ut_bsp_hb_read_meas_test();
-    if(!tr) pass = 0;
-
-    /* ODOUT TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_odout_write_test();
-    if(!tr) pass = 0;
-
-    tr = ut_bsp_odout_write_common_test();
-    if(!tr) pass = 0;
-
-    /* SETUP TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_bsp_startup_test();
-    if(!tr) pass = 0;
-
-    /* FINAL RESULT */
-    printf("******************************************************\n");
-
-    tr = ut_util_interpolate_1d_u16b_test();
-    if(!tr) pass = 0;
-
-    tr = ut_util_interpolate_2d_u16b_test();
-    if(!tr) pass = 0;
-
-
-    if(pass)
-    {
-        printf("ALL PASS\n\n");
-        return 1;
-    }
-    else
-    {
-        printf("SOME FAIL\n\n");
-        return 0;
-    }
-
-    return 0;
-}

firmware/tests/hw_main.c

@@ -1,102 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "ut_hw/ut_analog.h"
-#include "ut_hw/ut_buttons.h"
-#include "ut_hw/ut_hb_control.h"
-#include "ut_hw/ut_led_display.h"
-#include "ut_hw/ut_startup.h"
-
-int main()
-{
-    int tr;
-    int pass = 1;
-    int t_cnt = 0;
-    int f_cnt = 0;
-
-    /* ANALOG TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_analog_ch_get_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* BUTTON TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_btn_reset_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_btn_process_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_btn_ch_process_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_btn_ch_set_pull_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* HALFBRIDGE CONTROL TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_hb_is_equal_fb_struct_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_hb_is_equal_ctrl_struct_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_hb_init_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_hb_enable_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_hb_disable_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_hb_process_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* DISPLAY TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_led_dsp_set_image_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_led_dsp_backligth_set_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* STARTUP TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_hw_startup_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    printf("******************************************************\n");
-    printf("\n%d TESTS DONE\n", t_cnt);
-    if(pass)
-    {
-        printf("ALL PASS\n\n");
-        return 1;
-    }
-    else
-    {
-        printf("%d FAILED\n\n", f_cnt);
-        return 0;
-    }
-
-    return 0;
-}

firmware/tests/logic_main.c

@@ -1,98 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "ut_logic/ut_coil.h"
-#include "ut_logic/ut_display.h"
-#include "ut_logic/ut_force.h"
-#include "ut_logic/ut_pot.h"
-#include "ut_logic/ut_user_force.h"
-
-int main()
-{
-    int tr;
-    int pass = 1;
-    int t_cnt = 0;
-    int f_cnt = 0;
-
-    /* COIL TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_coil_target_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* DISPLAY TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_dsp_init_ctrl_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_set_lock_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_reset_lock_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_img_percent_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_img_raw_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_get_act_img_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_dsp_backlight_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* FORCE TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_force_cycle_bmode_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_force_next_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* POT TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_pot_mv_to_percent_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    /* USER FORCE TESTS */
-    printf("******************************************************\n");
-
-    tr = ut_user_force_btn_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    tr = ut_user_force_pot_test();
-    t_cnt++;
-    if(!tr){ pass = 0; f_cnt++;};
-
-    printf("******************************************************\n");
-    printf("\n%d TESTS DONE\n", t_cnt);
-    if(pass)
-    {
-        printf("ALL PASS\n\n");
-        return 1;
-    }
-    else
-    {
-        printf("%d FAILED\n\n", f_cnt);
-        return 0;
-    }
-
-    return 0;
-}

firmware/tests/mock_board/mock_board_ain.c

@@ -1,32 +0,0 @@
-#include "mock_board_ain.h"
-
-#define AIN_CH_CNT  5
-static uint8_t ain_ch = 0;
-static uint16_t ain_data[AIN_CH_CNT+1];
-
-uint16_t bsp_ain_read(uint8_t ch)
-{
-    if(ch > AIN_CH_CNT) return 0;
-    ain_ch = ch;
-    return ain_data[ch];
-}
-
-uint8_t mock_board_ain_read_ch(void)
-{
-    return ain_ch;
-}
-
-void mock_board_ain_write_ch(uint8_t ch)
-{
-    ain_ch = ch;
-}
-
-uint16_t mock_board_ain_read_data(uint8_t ch)
-{
-    return ain_data[ch];
-}
-
-void mock_board_ain_write_data(uint8_t ch, uint16_t value)
-{
-    ain_data[ch] = value;
-}

firmware/tests/mock_board/mock_board_ain.h

@@ -1,14 +0,0 @@
-#ifndef MOCK_BOARD_AIN_
-#define MOCK_BOARD_AIN_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\ain.h"
-
-uint8_t mock_board_ain_read_ch(void);
-void mock_board_ain_write_ch(uint8_t ch);
-uint16_t mock_board_ain_read_data(uint8_t ch);
-void mock_board_ain_write_data(uint8_t ch, uint16_t value);
-
-#endif /* MOCK_BOARD_AIN_ */

firmware/tests/mock_board/mock_board_din.c

@@ -1,32 +0,0 @@
-#include "mock_board_din.h"
-
-#define DIN_CH_CNT  9
-static uint8_t din_ch = 0;
-static uint8_t din_data[DIN_CH_CNT];
-
-uint8_t bsp_din_read(uint8_t ch)
-{
-    if(ch >= DIN_CH_CNT) return BSP_DIN_LOW;
-    din_ch = ch;
-    return din_data[ch];
-}
-
-uint8_t mock_board_din_read_ch(void)
-{
-    return din_ch;
-}
-
-void mock_board_din_write_ch(uint8_t ch)
-{
-    din_ch = ch;
-}
-
-uint8_t mock_board_din_read_data(uint8_t ch)
-{
-    return din_data[ch];
-}
-
-void mock_board_din_write_data(uint8_t ch, uint8_t value)
-{
-    din_data[ch] = value;
-}

firmware/tests/mock_board/mock_board_din.h

@@ -1,14 +0,0 @@
-#ifndef MOCK_BOARD_DIN_
-#define MOCK_BOARD_DIN_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\din.h"
-
-uint8_t mock_board_din_read_ch(void);
-void mock_board_din_write_ch(uint8_t ch);
-uint8_t mock_board_din_read_data(uint8_t ch);
-void mock_board_din_write_data(uint8_t ch, uint8_t value);
-
-#endif /* MOCK_BOARD_DIN_ */

firmware/tests/mock_board/mock_board_dout.c

@@ -1,31 +0,0 @@
-#include "mock_board_dout.h"
-
-#define DOUT_CH_CNT  7
-static uint8_t dout_ch = 0;
-static int8_t dout_data[DOUT_CH_CNT];
-
-void bsp_dout_write(uint8_t ch, int8_t lvl)
-{
-    if(ch < DOUT_CH_CNT) dout_data[ch] = lvl;
-    dout_ch = ch;
-}
-
-uint8_t mock_board_dout_read_ch(void)
-{
-    return dout_ch;
-}
-
-void mock_board_dout_write_ch(uint8_t ch)
-{
-    dout_ch = ch;
-}
-
-int8_t mock_board_dout_read_data(uint8_t ch)
-{
-    return dout_data[ch];
-}
-
-void mock_board_dout_write_data(uint8_t ch, int8_t lvl)
-{
-    dout_data[ch] = lvl;
-}

firmware/tests/mock_board/mock_board_dout.h

@@ -1,14 +0,0 @@
-#ifndef MOCK_BOARD_DOUT_
-#define MOCK_BOARD_DOUT_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\dout.h"
-
-uint8_t mock_board_dout_read_ch(void);
-void mock_board_dout_write_ch(uint8_t ch);
-int8_t mock_board_dout_read_data(uint8_t ch);
-void mock_board_dout_write_data(uint8_t ch, int8_t lvl);
-
-#endif /* MOCK_BOARD_DOUT_ */

firmware/tests/mock_board/mock_board_halfbridge.c

@@ -1,76 +0,0 @@
-#include "mock_board_halfbridge.h"
-
-#define DOUT_CH_CNT  6
-static uint8_t low_ctrl = 0;
-static uint16_t pwm_ctrl = 0;
-static hb_meas_t feedback;
-
-void bsp_hb_write_low(uint8_t state)
-{
-    low_ctrl = state;
-}
-
-void bsp_hb_write_pwm(uint16_t pwm)
-{
-    pwm_ctrl = pwm;
-}
-
-void bsp_hb_read_meas(hb_meas_t* measurements)
-{
-    measurements->out_voltage = feedback.out_voltage;
-	measurements->out_current = feedback.out_current;
-	measurements->sup_voltage = feedback.sup_voltage;
-	measurements->sup_current = feedback.sup_current;
-	measurements->out_power = feedback.out_power;
-	measurements->sup_power = feedback.sup_power;
-	measurements->out_impedance = feedback.out_impedance;
-	measurements->low_side_ctrl = feedback.low_side_ctrl;
-	measurements->pwm = feedback.pwm;
-}
-
-
-uint8_t mock_board_halfbridge_read_low(void)
-{
-    return low_ctrl;
-}
-
-void mock_board_halfbridge_write_low(uint8_t state)
-{
-    low_ctrl = state;
-}
-
-uint16_t mock_board_halfbridge_read_pwm(void)
-{
-    return pwm_ctrl;
-}
-
-void mock_board_halfbridge_write_pwm(uint16_t pwm)
-{
-    pwm_ctrl = pwm;
-}
-
-void mock_board_halfbridge_read_feedback(hb_meas_t* measurements)
-{
-    measurements->out_voltage = feedback.out_voltage;
-	measurements->out_current = feedback.out_current;
-	measurements->sup_voltage = feedback.sup_voltage;
-	measurements->sup_current = feedback.sup_current;
-	measurements->out_power = feedback.out_power;
-	measurements->sup_power = feedback.sup_power;
-	measurements->out_impedance = feedback.out_impedance;
-	measurements->low_side_ctrl = feedback.low_side_ctrl;
-	measurements->pwm = feedback.pwm;
-}
-
-void mock_board_halfbridge_write_feedback(hb_meas_t* new_fb)
-{
-    feedback.out_voltage = new_fb->out_voltage;
-	feedback.out_current = new_fb->out_current;
-	feedback.sup_voltage = new_fb->sup_voltage;
-	feedback.sup_current = new_fb->sup_current;
-	feedback.out_power = new_fb->out_power;
-	feedback.sup_power = new_fb->sup_power;
-	feedback.out_impedance = new_fb->out_impedance;
-	feedback.low_side_ctrl = new_fb->low_side_ctrl;
-	feedback.pwm = new_fb->pwm;
-}

firmware/tests/mock_board/mock_board_halfbridge.h

@@ -1,18 +0,0 @@
-#ifndef MOCK_BOARD_HALFBRIDGE_
-#define MOCK_BOARD_HALFBRIDGE_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\halfbridge.h"
-
-uint8_t mock_board_halfbridge_read_low(void);
-void mock_board_halfbridge_write_low(uint8_t state);
-
-uint16_t mock_board_halfbridge_read_pwm(void);
-void mock_board_halfbridge_write_pwm(uint16_t pwm);
-
-void mock_board_halfbridge_read_feedback(hb_meas_t* measurements);
-void mock_board_halfbridge_write_feedback(hb_meas_t* new_fb);
-
-#endif /* MOCK_BOARD_HALFBRIDGE_ */

firmware/tests/mock_board/mock_board_odout.c

@@ -1,47 +0,0 @@
-#include "mock_board_odout.h"
-
-#define ODOUT_CH_CNT  7
-static uint8_t odout_ch = 0;
-static int8_t odout_data[ODOUT_CH_CNT];
-static uint8_t common_pwm = 0;
-
-void bsp_odout_write(uint8_t ch, int8_t lvl)
-{
-    if(ch < ODOUT_CH_CNT) odout_data[ch] = lvl;
-    odout_ch = ch;
-}
-
-void bsp_odout_write_common(uint8_t percent)
-{
-    common_pwm = percent;
-}
-
-uint8_t mock_board_odout_read_ch(void)
-{
-    return odout_ch;
-}
-
-void mock_board_odout_write_ch(uint8_t ch)
-{
-    odout_ch = ch;
-}
-
-int8_t mock_board_odout_read_data(uint8_t ch)
-{
-    return odout_data[ch];
-}
-
-void mock_board_odout_write_data(uint8_t ch, int8_t lvl)
-{
-    odout_data[ch] = lvl;
-}
-
-uint8_t mock_board_odout_read_pwm(void)
-{
-    return common_pwm;
-}
-
-void mock_board_odout_write_pwm(uint8_t percent)
-{
-    common_pwm = percent;
-}

firmware/tests/mock_board/mock_board_odout.h

@@ -1,16 +0,0 @@
-#ifndef MOCK_BOARD_ODOUT_
-#define MOCK_BOARD_ODOUT_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\odout.h"
-
-uint8_t mock_board_odout_read_ch(void);
-void mock_board_odout_write_ch(uint8_t ch);
-int8_t mock_board_odout_read_data(uint8_t ch);
-void mock_board_odout_write_data(uint8_t ch, int8_t lvl);
-uint8_t mock_board_odout_read_pwm(void);
-void mock_board_odout_write_pwm(uint8_t percent);
-
-#endif /* MOCK_BOARD_ODOUT_ */

firmware/tests/mock_board/mock_board_setup.c

@@ -1,18 +0,0 @@
-#include "mock_board_setup.h"
-
-static uint8_t setup_called = 0;
-
-void bsp_startup(void)
-{
-    setup_called = 1;
-}
-
-uint8_t mock_board_setup_read_called(void)
-{
-    return setup_called;
-}
-
-void mock_board_setup_reset_called(void)
-{
-    setup_called = 0;
-}

firmware/tests/mock_board/mock_board_setup.h

@@ -1,12 +0,0 @@
-#ifndef MOCK_BOARD_SETUP_
-#define MOCK_BOARD_SETUP_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "..\..\src\hw\board\setup.h"
-
-uint8_t mock_board_setup_read_called(void);
-void mock_board_setup_reset_called(void);
-
-#endif /* MOCK_BOARD_SETUP_ */

firmware/tests/mock_mcu/mock_mcu_hal_r8.c

@@ -1,178 +0,0 @@
-#include "..\..\src\hw\board\mcu\mcu_hal.h"
-#include "mock_mcu_hal_r8.h"
-
-// Startup-Configuration functions
-static startupCfg_t saved_hwCfg;
-
-void mcu_startup(startupCfg_t* hwCfg)
-{
-    saved_hwCfg.adc_clk = hwCfg->adc_clk;
-    saved_hwCfg.pwm_clk = hwCfg->pwm_clk;
-	saved_hwCfg.pwm_top = hwCfg->pwm_top;
-	saved_hwCfg.pwm_chb_en = hwCfg->pwm_chb_en;
-}
-
-void mock_mcu_startup_read_cfg(startupCfg_t* cfg_out)
-{
-    cfg_out->adc_clk = saved_hwCfg.adc_clk;
-    cfg_out->pwm_clk = saved_hwCfg.pwm_clk;
-	cfg_out->pwm_top = saved_hwCfg.pwm_top;
-	cfg_out->pwm_chb_en = saved_hwCfg.pwm_chb_en;
-}
-
-void mock_mcu_startup_write_cfg(startupCfg_t* cfg_in)
-{
-   saved_hwCfg.adc_clk = cfg_in->adc_clk;
-    saved_hwCfg.pwm_clk = cfg_in->pwm_clk;
-	saved_hwCfg.pwm_top = cfg_in->pwm_top;
-	saved_hwCfg.pwm_chb_en = cfg_in->pwm_chb_en;
-}
-
-// ADC Interface functions
-#define ADC_CH_CNT 16
-static uint8_t adc_ch = 0;
-static uint16_t adc_raw[ADC_CH_CNT];
-
-uint16_t mcu_adc_read(uint8_t ch)
-{
-    adc_ch = ch;
-
-    //Safe guard mux
-	if(ch > (ADC_CH_CNT-1)) return 0xFFFF;
-	// Not available channels
-	if((ch > 8) && (ch<14)) return 0xFFFF;
-
-    return adc_raw[ch];
-}
-
-uint8_t mock_mcu_adc_read_ch(void)
-{
-    return adc_ch;
-}
-
-void mock_mcu_adc_set_ch(uint8_t new_ch)
-{
-    adc_ch = new_ch;
-}
-
-uint16_t mock_mcu_adc_read_raw(uint8_t ch)
-{
-    return adc_raw[ch];
-}
-
-void mock_mcu_adc_set_raw(uint16_t new_adc_out, uint8_t ch)
-{
-    adc_raw[ch] = new_adc_out;
-}
-
-// PWM Timer Interface functions
-#define PWM_CH_CNT 2
-static uint8_t pwm_ch = 0;
-static uint16_t pwm_raw[PWM_CH_CNT];
-
-void mcu_pwm_write(uint8_t ch, uint16_t dc)
-{
-    pwm_ch = ch;
-    if(ch < PWM_CH_CNT) pwm_raw[ch] = dc;
-}
-
-uint16_t mcu_pwm_read(uint8_t ch)
-{
-    pwm_ch = ch;
-    if(ch < PWM_CH_CNT) return pwm_raw[ch];
-    else return 0;
-}
-
-uint8_t mock_mcu_pwm_read_ch(void)
-{
-    return pwm_ch;
-}
-
-void mock_mcu_pwm_set_ch(uint8_t new_ch)
-{
-    pwm_ch = new_ch;
-}
-
-uint16_t mock_mcu_pwm_read_raw(uint8_t ch)
-{
-    return pwm_raw[ch];
-}
-
-void mock_mcu_pwm_set_raw(uint16_t new_pwm, uint8_t ch)
-{
-    pwm_raw[ch] = new_pwm;
-}
-
-// GPIO Functions
-#define GPIO_CH_CNT 18
-static uint8_t gpio_ch = 0;
-static uint8_t gpio_input_lvl[GPIO_CH_CNT];
-static int8_t gpio_output_lvl[GPIO_CH_CNT];
-
-uint8_t mcu_gpio_read(uint8_t ch)
-{
-    gpio_ch = ch;
-    if(ch < GPIO_CH_CNT) return gpio_input_lvl[ch];
-    else return 0;
-}
-
-void mcu_gpio_write(uint8_t ch, int8_t lvl)
-{
-    gpio_ch = ch;
-    if(ch < GPIO_CH_CNT) gpio_output_lvl[ch] = lvl;
-}
-
-uint8_t mock_mcu_gpio_read_ch(void)
-{
-    return gpio_ch;
-}
-
-void mock_mcu_gpio_set_ch(uint8_t new_ch)
-{
-    gpio_ch = new_ch;
-}
-
-int8_t mock_mcu_gpio_read_output_lvl(uint8_t ch)
-{
-    return gpio_output_lvl[ch];
-}
-
-void mock_mcu_gpio_set_output_lvl(int8_t new_output_lvl, uint8_t ch)
-{
-    gpio_output_lvl[ch] = new_output_lvl;
-}
-
-void mock_mcu_gpio_set_input_lvl(uint8_t new_in_lvl, uint8_t ch)
-{
-    gpio_input_lvl[ch] = new_in_lvl;
-}
-
-// EEPROM functions
-uint8_t mcu_ee_read8b(uint16_t address)
-{
-    return 0x00;
-}
-
-uint16_t mcu_ee_read16b(uint16_t address)
-{
-    return 0x0000;
-}
-
-uint32_t mcu_ee_read32b(uint16_t address)
-{
-    return 0x00000000;
-}
-
-void mcu_ee_write8b(uint16_t address, uint8_t value)
-{
-
-}
-
-void mcu_ee_write16b(uint16_t address, uint16_t value)
-{
-}
-
-void mcu_ee_write32b(uint16_t address, uint32_t value)
-{
-
-}

firmware/tests/mock_mcu/mock_mcu_hal_r8.h

@@ -1,28 +0,0 @@
-#ifndef MOCK_MCU_HAL_R8_
-#define MOCK_MCU_HAL_R8_
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include "../../src/hw/board/mcu/mcu_hal.h"
-
-void mock_mcu_startup_read_cfg(startupCfg_t* cfg_out);
-void mock_mcu_startup_write_cfg(startupCfg_t* cfg_in);
-
-uint8_t mock_mcu_adc_read_ch(void);
-void mock_mcu_adc_set_ch(uint8_t ch);
-uint16_t mock_mcu_adc_read_raw(uint8_t ch);
-void mock_mcu_adc_set_raw(uint16_t new_adc_out, uint8_t ch);
-
-uint8_t mock_mcu_pwm_read_ch(void);
-void mock_mcu_pwm_set_ch(uint8_t new_ch);
-uint16_t mock_mcu_pwm_read_raw(uint8_t ch);
-void mock_mcu_pwm_set_raw(uint16_t new_pwm, uint8_t ch);
-
-uint8_t mock_mcu_gpio_read_ch(void);
-void mock_mcu_gpio_set_ch(uint8_t new_ch);
-int8_t mock_mcu_gpio_read_output_lvl(uint8_t ch);
-void mock_mcu_gpio_set_output_lvl(int8_t new_output_lvl, uint8_t ch);
-void mock_mcu_gpio_set_input_lvl(uint8_t new_in_lvl, uint8_t ch);
-
-#endif /* MOCK_MCU_HAL_R8_ */

firmware/tests/uDCCD_Unit_Tests_BSP.cbp

@@ -1,106 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_project_file>
-	<FileVersion major="1" minor="6" />
-	<Project>
-		<Option title="uDCCD_Unit_Tests_BSP" />
-		<Option pch_mode="2" />
-		<Option compiler="gcc" />
-		<Build>
-			<Target title="Debug">
-				<Option output="bin/Debug/uDCCD_Unit_Tests_BSP" prefix_auto="1" extension_auto="1" />
-				<Option object_output="obj/Debug/" />
-				<Option type="1" />
-				<Option compiler="gcc" />
-				<Compiler>
-					<Add option="-g" />
-				</Compiler>
-			</Target>
-		</Build>
-		<Compiler>
-			<Add option="-Wall" />
-		</Compiler>
-		<Unit filename="../src/hw/board/ain.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/ain.h" />
-		<Unit filename="../src/hw/board/din.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/din.h" />
-		<Unit filename="../src/hw/board/dout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/dout.h" />
-		<Unit filename="../src/hw/board/halfbridge.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/halfbridge.h" />
-		<Unit filename="../src/hw/board/mcu/mcu_hal.h" />
-		<Unit filename="../src/hw/board/odout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/odout.h" />
-		<Unit filename="../src/hw/board/setup.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/setup.h" />
-		<Unit filename="../src/hw/board/utils/faults.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/faults.h" />
-		<Unit filename="../src/hw/board/utils/fuses.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/fuses.h" />
-		<Unit filename="../src/hw/board/utils/utils.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/utils.h" />
-		<Unit filename="bsp_main.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_mcu/mock_mcu_hal_r8.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_mcu/mock_mcu_hal_r8.h" />
-		<Unit filename="ut_board/ut_ain.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_ain.h" />
-		<Unit filename="ut_board/ut_din.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_din.h" />
-		<Unit filename="ut_board/ut_dout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_dout.h" />
-		<Unit filename="ut_board/ut_halfbridge.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_halfbridge.h" />
-		<Unit filename="ut_board/ut_odout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_odout.h" />
-		<Unit filename="ut_board/ut_setup.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_board/ut_setup.h" />
-		<Unit filename="ut_utils/ut_fault.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_utils/ut_fault.h" />
-		<Unit filename="ut_utils/ut_fuses.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_utils/ut_fuses.h" />
-		<Unit filename="ut_utils/ut_utils.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_utils/ut_utils.h" />
-		<Extensions>
-			<lib_finder disable_auto="1" />
-		</Extensions>
-	</Project>
-</CodeBlocks_project_file>

firmware/tests/uDCCD_Unit_Tests_BSP.depend

@@ -1,348 +0,0 @@
-# depslib dependency file v1.0
-1698696655 source:f:\microrally\udccd_controller\src\hw\board\ain.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"ain.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\utils.h
-	<stdint.h>
-
-1698776270 f:\microrally\udccd_controller\src\hw\board\mcu\mcu_hal.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\ain.h
-	<stdint.h>
-
-1698336545 source:f:\microrally\udccd_controller\src\hw\board\din.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"din.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\din.h
-	<stdint.h>
-
-1698740890 source:f:\microrally\udccd_controller\src\hw\board\dout.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"dout.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\dout.h
-	<stdint.h>
-
-1698575529 source:f:\microrally\udccd_controller\src\hw\board\halfbridge.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"halfbridge.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\halfbridge.h
-	<stdint.h>
-
-1697628825 source:f:\microrally\udccd_controller\src\hw\board\odout.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"odout.h"
-
-1699197585 f:\microrally\udccd_controller\src\hw\board\odout.h
-	<stdint.h>
-
-1698336545 source:f:\microrally\udccd_controller\src\hw\board\setup.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"setup.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\setup.h
-	<stdint.h>
-
-1699031869 source:f:\microrally\udccd_controller\src\hw\board\utils\faults.c
-	"faults.h"
-	"utils.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\faults.h
-	<stdint.h>
-
-1699031869 source:f:\microrally\udccd_controller\src\hw\board\utils\fuses.c
-	"fuses.h"
-	"utils.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\fuses.h
-	<stdint.h>
-
-1699031869 source:f:\microrally\udccd_controller\src\hw\board\utils\utils.c
-	"utils.h"
-
-1699205020 source:f:\microrally\udccd_controller\tests\bsp_main.c
-	<stdio.h>
-	<stdlib.h>
-	"ut_utils/ut_utils.h"
-	"ut_utils/ut_fault.h"
-	"ut_utils/ut_fuses.h"
-	"ut_board/ut_ain.h"
-	"ut_board/ut_din.h"
-	"ut_board/ut_dout.h"
-	"ut_board/ut_halfbridge.h"
-	"ut_board/ut_odout.h"
-	"ut_board/ut_setup.h"
-
-1699204674 f:\microrally\udccd_controller\tests\ut_utils\ut_utils.h
-	<stdio.h>
-	<stdlib.h>
-
-1698870535 f:\microrally\udccd_controller\tests\ut_utils\ut_fault.h
-	<stdio.h>
-	<stdlib.h>
-
-1698959419 f:\microrally\udccd_controller\tests\ut_utils\ut_fuses.h
-	<stdio.h>
-	<stdlib.h>
-
-1699031869 f:\microrally\udccd_controller\tests\ut_board\ut_ain.h
-	<stdio.h>
-	<stdlib.h>
-
-1699041803 f:\microrally\udccd_controller\tests\ut_board\ut_din.h
-	<stdio.h>
-	<stdlib.h>
-
-1699042443 f:\microrally\udccd_controller\tests\ut_board\ut_dout.h
-	<stdio.h>
-	<stdlib.h>
-
-1699051096 f:\microrally\udccd_controller\tests\ut_board\ut_halfbridge.h
-	<stdio.h>
-	<stdlib.h>
-
-1699200555 source:f:\microrally\udccd_controller\tests\mock_mcu\mock_mcu_hal_r8.c
-	"..\..\src\hw\board\mcu\mcu_hal.h"
-	"mock_mcu_hal_r8.h"
-
-1699200561 f:\microrally\udccd_controller\tests\mock_mcu\mock_mcu_hal_r8.h
-	<stdio.h>
-	<stdlib.h>
-	"../../src/hw/board/mcu/mcu_hal.h"
-
-1699196285 source:f:\microrally\udccd_controller\tests\ut_board\ut_ain.c
-	"ut_ain.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\ain.h"
-
-1699196304 source:f:\microrally\udccd_controller\tests\ut_board\ut_din.c
-	"ut_din.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\din.h"
-
-1699196320 source:f:\microrally\udccd_controller\tests\ut_board\ut_dout.c
-	"ut_dout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\dout.h"
-
-1699196359 source:f:\microrally\udccd_controller\tests\ut_board\ut_halfbridge.c
-	"ut_dout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\halfbridge.h"
-
-1699196427 source:f:\microrally\udccd_controller\tests\ut_utils\ut_fault.c
-	"ut_fault.h"
-	"..\..\src\hw\board\utils\faults.h"
-
-1699196445 source:f:\microrally\udccd_controller\tests\ut_utils\ut_fuses.c
-	"ut_fuses.h"
-	"..\..\src\hw\board\utils\fuses.h"
-
-1699203820 source:f:\microrally\udccd_controller\tests\ut_utils\ut_utils.c
-	"ut_utils.h"
-	"..\..\src\hw\board\utils\utils.h"
-
-1699200030 f:\microrally\udccd_controller\tests\ut_board\ut_odout.h
-	<stdio.h>
-	<stdlib.h>
-
-1699200020 source:f:\microrally\udccd_controller\tests\ut_board\ut_odout.c
-	"ut_odout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\odout.h"
-
-1699201018 f:\microrally\udccd_controller\tests\ut_board\ut_setup.h
-	<stdio.h>
-	<stdlib.h>
-
-1699201095 source:f:\microrally\udccd_controller\tests\ut_board\ut_setup.c
-	"ut_odout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\setup.h"
-
-1699018375 source:d:\microrally\udccd_controller\src\hw\board\ain.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"ain.h"
-
-1699007962 d:\microrally\udccd_controller\src\hw\board\utils\utils.h
-	<stdint.h>
-
-1699017409 d:\microrally\udccd_controller\src\hw\board\mcu\mcu_hal.h
-	<stdint.h>
-
-1699535273 d:\microrally\udccd_controller\src\hw\board\ain.h
-	<stdint.h>
-	"config.h"
-
-1698333216 source:d:\microrally\udccd_controller\src\hw\board\din.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"din.h"
-
-1699535289 d:\microrally\udccd_controller\src\hw\board\din.h
-	<stdint.h>
-
-1698673847 source:d:\microrally\udccd_controller\src\hw\board\dout.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"dout.h"
-
-1699535296 d:\microrally\udccd_controller\src\hw\board\dout.h
-	<stdint.h>
-
-1698656931 source:d:\microrally\udccd_controller\src\hw\board\halfbridge.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"halfbridge.h"
-
-1699535318 d:\microrally\udccd_controller\src\hw\board\halfbridge.h
-	<stdint.h>
-	"config.h"
-
-1697618884 source:d:\microrally\udccd_controller\src\hw\board\odout.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"odout.h"
-
-1699257917 d:\microrally\udccd_controller\src\hw\board\odout.h
-	<stdint.h>
-
-1698328348 source:d:\microrally\udccd_controller\src\hw\board\setup.c
-	"utils/utils.h"
-	"mcu/mcu_hal.h"
-	"setup.h"
-
-1699017683 d:\microrally\udccd_controller\src\hw\board\setup.h
-	<stdint.h>
-
-1699007034 source:d:\microrally\udccd_controller\src\hw\board\utils\faults.c
-	"faults.h"
-	"utils.h"
-
-1699007033 d:\microrally\udccd_controller\src\hw\board\utils\faults.h
-	<stdint.h>
-
-1699007093 source:d:\microrally\udccd_controller\src\hw\board\utils\fuses.c
-	"fuses.h"
-	"utils.h"
-
-1699007094 d:\microrally\udccd_controller\src\hw\board\utils\fuses.h
-	<stdint.h>
-
-1699264217 source:d:\microrally\udccd_controller\src\hw\board\utils\utils.c
-	"utils.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\bsp_main.c
-	<stdio.h>
-	<stdlib.h>
-	"ut_utils/ut_utils.h"
-	"ut_utils/ut_fault.h"
-	"ut_utils/ut_fuses.h"
-	"ut_board/ut_ain.h"
-	"ut_board/ut_din.h"
-	"ut_board/ut_dout.h"
-	"ut_board/ut_halfbridge.h"
-	"ut_board/ut_odout.h"
-	"ut_board/ut_setup.h"
-
-1699257917 d:\microrally\udccd_controller\tests\ut_utils\ut_utils.h
-	<stdio.h>
-	<stdlib.h>
-
-1698921312 d:\microrally\udccd_controller\tests\ut_utils\ut_fault.h
-	<stdio.h>
-	<stdlib.h>
-
-1699004735 d:\microrally\udccd_controller\tests\ut_utils\ut_fuses.h
-	<stdio.h>
-	<stdlib.h>
-
-1699018575 d:\microrally\udccd_controller\tests\ut_board\ut_ain.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 d:\microrally\udccd_controller\tests\ut_board\ut_din.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 d:\microrally\udccd_controller\tests\ut_board\ut_dout.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 d:\microrally\udccd_controller\tests\ut_board\ut_halfbridge.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 d:\microrally\udccd_controller\tests\ut_board\ut_odout.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 d:\microrally\udccd_controller\tests\ut_board\ut_setup.h
-	<stdio.h>
-	<stdlib.h>
-
-1699257917 source:d:\microrally\udccd_controller\tests\mock_mcu\mock_mcu_hal_r8.c
-	"..\..\src\hw\board\mcu\mcu_hal.h"
-	"mock_mcu_hal_r8.h"
-
-1699257917 d:\microrally\udccd_controller\tests\mock_mcu\mock_mcu_hal_r8.h
-	<stdio.h>
-	<stdlib.h>
-	"../../src/hw/board/mcu/mcu_hal.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_ain.c
-	"ut_ain.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\ain.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_din.c
-	"ut_din.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\din.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_dout.c
-	"ut_dout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\dout.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_halfbridge.c
-	"ut_dout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\halfbridge.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_odout.c
-	"ut_odout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\odout.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_board\ut_setup.c
-	"ut_odout.h"
-	"..\mock_mcu\mock_mcu_hal_r8.h"
-	"..\..\src\hw\board\setup.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_utils\ut_fault.c
-	"ut_fault.h"
-	"..\..\src\hw\board\utils\faults.h"
-
-1699257917 source:d:\microrally\udccd_controller\tests\ut_utils\ut_fuses.c
-	"ut_fuses.h"
-	"..\..\src\hw\board\utils\fuses.h"
-
-1699264250 source:d:\microrally\udccd_controller\tests\ut_utils\ut_utils.c
-	"ut_utils.h"
-	"..\..\src\hw\board\utils\utils.h"
-
-1699535389 d:\microrally\udccd_controller\src\hw\board\config.h
-	<stdint.h>
-

firmware/tests/uDCCD_Unit_Tests_BSP.layout

@@ -1,90 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_layout_file>
-	<FileVersion major="1" minor="0" />
-	<ActiveTarget name="Debug" />
-	<File name="ut_utils\ut_utils.c" open="0" top="0" tabpos="1" split="0" active="1" splitpos="0" zoom_1="-1" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="30322" topLine="1293" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_ain.c" open="0" top="0" tabpos="5" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="1582" topLine="41" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_odout.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="169" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_mcu\mock_mcu_hal_r8.c" open="0" top="0" tabpos="1" split="0" active="1" splitpos="0" zoom_1="1" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="2789" topLine="117" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_dout.c" open="0" top="0" tabpos="7" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="4236" topLine="87" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\board\mcu\mcu_hal.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="844" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_mcu\mock_mcu_hal_r8.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="231" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_setup.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="4" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="715" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\board\utils\utils.c" open="0" top="0" tabpos="2" split="0" active="1" splitpos="0" zoom_1="1" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="5492" topLine="188" />
-		</Cursor>
-	</File>
-	<File name="ut_utils\ut_utils.h" open="0" top="0" tabpos="3" split="0" active="1" splitpos="0" zoom_1="4" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="664" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_utils\ut_fuses.c" open="0" top="0" tabpos="3" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="1650" topLine="24" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_setup.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="8" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="122" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="bsp_main.c" open="0" top="0" tabpos="1" split="0" active="1" splitpos="0" zoom_1="5" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="3165" topLine="121" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_halfbridge.c" open="0" top="0" tabpos="8" split="0" active="1" splitpos="0" zoom_1="5" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="2947" topLine="90" />
-		</Cursor>
-	</File>
-	<File name="ut_utils\ut_fault.c" open="0" top="0" tabpos="4" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="29993" topLine="896" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_odout.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="6" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="5245" topLine="172" />
-		</Cursor>
-	</File>
-	<File name="ut_board\ut_din.c" open="0" top="0" tabpos="6" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="815" topLine="135" />
-		</Cursor>
-	</File>
-</CodeBlocks_layout_file>

firmware/tests/uDCCD_Unit_Tests_HW.cbp

@@ -1,105 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_project_file>
-	<FileVersion major="1" minor="6" />
-	<Project>
-		<Option title="uDCCD_Unit_Tests_HW" />
-		<Option pch_mode="2" />
-		<Option compiler="gcc" />
-		<Build>
-			<Target title="Debug">
-				<Option output="bin/Debug/uDCCD_Unit_Tests_HW" prefix_auto="1" extension_auto="1" />
-				<Option object_output="obj/Debug/" />
-				<Option type="1" />
-				<Option compiler="gcc" />
-				<Compiler>
-					<Add option="-g" />
-					<Add option="-DTESTING" />
-				</Compiler>
-			</Target>
-		</Build>
-		<Compiler>
-			<Add option="-Wall" />
-			<Add option="-DTESTING" />
-		</Compiler>
-		<Unit filename="../src/hw/analog.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/analog.h" />
-		<Unit filename="../src/hw/board/utils/faults.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/faults.h" />
-		<Unit filename="../src/hw/board/utils/fuses.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/fuses.h" />
-		<Unit filename="../src/hw/board/utils/utils.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/board/utils/utils.h" />
-		<Unit filename="../src/hw/buttons.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/buttons.h" />
-		<Unit filename="../src/hw/hb_control.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/hb_control.h" />
-		<Unit filename="../src/hw/led_display.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/led_display.h" />
-		<Unit filename="../src/hw/startup.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/hw/startup.h" />
-		<Unit filename="hw_main.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_ain.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_ain.h" />
-		<Unit filename="mock_board/mock_board_din.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_din.h" />
-		<Unit filename="mock_board/mock_board_dout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_dout.h" />
-		<Unit filename="mock_board/mock_board_halfbridge.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_halfbridge.h" />
-		<Unit filename="mock_board/mock_board_odout.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_odout.h" />
-		<Unit filename="mock_board/mock_board_setup.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="mock_board/mock_board_setup.h" />
-		<Unit filename="ut_hw/ut_analog.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_hw/ut_analog.h" />
-		<Unit filename="ut_hw/ut_buttons.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_hw/ut_buttons.h" />
-		<Unit filename="ut_hw/ut_hb_control.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_hw/ut_hb_control.h" />
-		<Unit filename="ut_hw/ut_led_display.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_hw/ut_led_display.h" />
-		<Unit filename="ut_hw/ut_startup.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_hw/ut_startup.h" />
-		<Extensions />
-	</Project>
-</CodeBlocks_project_file>

firmware/tests/uDCCD_Unit_Tests_HW.depend

@@ -1,378 +0,0 @@
-# depslib dependency file v1.0
-1699007034 source:d:\microrally\udccd_controller\src\hw\board\utils\faults.c
-	"faults.h"
-	"utils.h"
-
-1699007033 d:\microrally\udccd_controller\src\hw\board\utils\faults.h
-	<stdint.h>
-
-1699007962 d:\microrally\udccd_controller\src\hw\board\utils\utils.h
-	<stdint.h>
-
-1699007093 source:d:\microrally\udccd_controller\src\hw\board\utils\fuses.c
-	"fuses.h"
-	"utils.h"
-
-1699007094 d:\microrally\udccd_controller\src\hw\board\utils\fuses.h
-	<stdint.h>
-
-1699264217 source:d:\microrally\udccd_controller\src\hw\board\utils\utils.c
-	"utils.h"
-
-1698741271 source:d:\microrally\udccd_controller\src\hw\analog.c
-	"board/utils/utils.h"
-	"board/ain.h"
-	"analog.h"
-
-1699535273 d:\microrally\udccd_controller\src\hw\board\ain.h
-	<stdint.h>
-	"config.h"
-
-1699017683 d:\microrally\udccd_controller\src\hw\analog.h
-	<stdint.h>
-
-1699283768 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_dout.c
-	"mock_board_dout.h"
-
-1699535296 d:\microrally\udccd_controller\src\hw\board\dout.h
-	<stdint.h>
-
-1699272290 d:\microrally\udccd_controller\tests\mock_board\mock_board_dout.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\dout.h"
-
-1699283776 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_odout.c
-	"mock_board_odout.h"
-
-1699257917 d:\microrally\udccd_controller\src\hw\board\odout.h
-	<stdint.h>
-
-1699272272 d:\microrally\udccd_controller\tests\mock_board\mock_board_odout.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\odout.h"
-
-1699272265 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_setup.c
-	"mock_board_setup.h"
-
-1699017683 d:\microrally\udccd_controller\src\hw\board\setup.h
-	<stdint.h>
-
-1699272264 d:\microrally\udccd_controller\tests\mock_board\mock_board_setup.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\setup.h"
-
-1699516357 source:d:\microrally\udccd_controller\tests\hw_main.c
-	<stdio.h>
-	<stdlib.h>
-	"ut_hw/ut_analog.h"
-	"ut_hw/ut_buttons.h"
-	"ut_hw/ut_hb_control.h"
-	"ut_hw/ut_led_display.h"
-	"ut_hw/ut_startup.h"
-
-1699271694 d:\microrally\udccd_controller\tests\ut_hw\ut_analog.h
-	<stdio.h>
-	<stdlib.h>
-
-1699272372 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_ain.c
-	"mock_board_ain.h"
-
-1699272245 d:\microrally\udccd_controller\tests\mock_board\mock_board_ain.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\ain.h"
-
-1699283758 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_din.c
-	"mock_board_din.h"
-
-1699535289 d:\microrally\udccd_controller\src\hw\board\din.h
-	<stdint.h>
-
-1699272297 d:\microrally\udccd_controller\tests\mock_board\mock_board_din.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\din.h"
-
-1699535318 d:\microrally\udccd_controller\src\hw\board\halfbridge.h
-	<stdint.h>
-	"config.h"
-
-1699272285 source:d:\microrally\udccd_controller\tests\mock_board\mock_board_halfbridge.c
-	"mock_board_halfbridge.h"
-
-1699287859 d:\microrally\udccd_controller\tests\mock_board\mock_board_halfbridge.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\halfbridge.h"
-
-1699276363 source:d:\microrally\udccd_controller\tests\ut_hw\ut_analog.c
-	"ut_analog.h"
-	"..\mock_board\mock_board_ain.h"
-	"..\..\src\hw\analog.h"
-
-1699284536 source:d:\microrally\udccd_controller\tests\ut_hw\ut_buttons.c
-	"ut_buttons.h"
-	"..\mock_board\mock_board_din.h"
-	"..\mock_board\mock_board_dout.h"
-	"..\..\src\hw\buttons.h"
-
-1699284495 d:\microrally\udccd_controller\tests\ut_hw\ut_buttons.h
-	<stdio.h>
-	<stdlib.h>
-
-1699535453 d:\microrally\udccd_controller\src\hw\buttons.h
-	<stdint.h>
-	"config.h"
-
-1699516357 source:d:\microrally\udccd_controller\src\hw\buttons.c
-	"board/utils/utils.h"
-	"board/din.h"
-	"board/dout.h"
-	"buttons.h"
-
-1699373886 source:d:\microrally\udccd_controller\src\hw\hb_control.c
-	"board/utils/utils.h"
-	"board/halfbridge.h"
-	"hb_control.h"
-
-1699351840 d:\microrally\udccd_controller\src\hw\hb_control.h
-	<stdint.h>
-	"board/utils/faults.h"
-	"board/utils/fuses.h"
-	"board/halfbridge.h"
-
-1699286008 source:d:\microrally\udccd_controller\src\hw\led_display.c
-	"board/odout.h"
-	"led_display.h"
-
-1699017683 d:\microrally\udccd_controller\src\hw\led_display.h
-	<stdint.h>
-
-1698328349 source:d:\microrally\udccd_controller\src\hw\startup.c
-	"board/utils/utils.h"
-	"board/setup.h"
-	"startup.h"
-
-1699017682 d:\microrally\udccd_controller\src\hw\startup.h
-	<stdint.h>
-
-1699285771 d:\microrally\udccd_controller\tests\ut_hw\ut_startup.h
-	<stdio.h>
-	<stdlib.h>
-
-1699285777 source:d:\microrally\udccd_controller\tests\ut_hw\ut_startup.c
-	"ut_startup.h"
-	"..\mock_board\mock_board_setup.h"
-	"..\..\src\hw\startup.h"
-
-1699286754 source:d:\microrally\udccd_controller\tests\ut_hw\ut_led_display.c
-	"ut_led_display.h"
-	"..\mock_board\mock_board_odout.h"
-	"..\..\src\hw\led_display.h"
-
-1699286570 d:\microrally\udccd_controller\tests\ut_hw\ut_led_display.h
-	<stdio.h>
-	<stdlib.h>
-
-1699375169 source:d:\microrally\udccd_controller\tests\ut_hw\ut_hb_control.c
-	"ut_hb_control.h"
-	"..\mock_board\mock_board_halfbridge.h"
-	"..\..\src\hw\hb_control.h"
-
-1699371510 d:\microrally\udccd_controller\tests\ut_hw\ut_hb_control.h
-	<stdio.h>
-	<stdlib.h>
-
-1699031869 source:f:\microrally\udccd_controller\src\hw\board\utils\faults.c
-	"faults.h"
-	"utils.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\faults.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\utils.h
-	<stdint.h>
-
-1699031869 source:f:\microrally\udccd_controller\src\hw\board\utils\fuses.c
-	"fuses.h"
-	"utils.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\utils\fuses.h
-	<stdint.h>
-
-1698697335 source:f:\microrally\udccd_controller\src\hw\analog.c
-	"board/utils/utils.h"
-	"board/ain.h"
-	"analog.h"
-
-1699476816 f:\microrally\udccd_controller\src\hw\board\ain.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\analog.h
-	<stdint.h>
-
-1699298687 source:f:\microrally\udccd_controller\src\hw\board\utils\utils.c
-	"utils.h"
-
-1699298687 source:f:\microrally\udccd_controller\src\hw\buttons.c
-	"board/utils/utils.h"
-	"board/din.h"
-	"board/dout.h"
-	"buttons.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\din.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\dout.h
-	<stdint.h>
-
-1699477045 f:\microrally\udccd_controller\src\hw\buttons.h
-	<stdint.h>
-
-1699298687 source:f:\microrally\udccd_controller\src\hw\led_display.c
-	"board/odout.h"
-	"led_display.h"
-
-1699197585 f:\microrally\udccd_controller\src\hw\board\odout.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\led_display.h
-	<stdint.h>
-
-1698336545 source:f:\microrally\udccd_controller\src\hw\startup.c
-	"board/utils/utils.h"
-	"board/setup.h"
-	"startup.h"
-
-1699031869 f:\microrally\udccd_controller\src\hw\board\setup.h
-	<stdint.h>
-
-1699031869 f:\microrally\udccd_controller\src\hw\startup.h
-	<stdint.h>
-
-1699474639 source:f:\microrally\udccd_controller\tests\hw_main.c
-	<stdio.h>
-	<stdlib.h>
-	"ut_hw/ut_analog.h"
-	"ut_hw/ut_buttons.h"
-	"ut_hw/ut_hb_control.h"
-	"ut_hw/ut_led_display.h"
-	"ut_hw/ut_startup.h"
-
-1699298688 f:\microrally\udccd_controller\tests\ut_hw\ut_analog.h
-	<stdio.h>
-	<stdlib.h>
-
-1699298688 f:\microrally\udccd_controller\tests\ut_hw\ut_buttons.h
-	<stdio.h>
-	<stdlib.h>
-
-1699298688 f:\microrally\udccd_controller\tests\ut_hw\ut_startup.h
-	<stdio.h>
-	<stdlib.h>
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_ain.c
-	"mock_board_ain.h"
-
-1699298687 f:\microrally\udccd_controller\tests\mock_board\mock_board_ain.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\ain.h"
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_din.c
-	"mock_board_din.h"
-
-1699298687 f:\microrally\udccd_controller\tests\mock_board\mock_board_din.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\din.h"
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_dout.c
-	"mock_board_dout.h"
-
-1699298687 f:\microrally\udccd_controller\tests\mock_board\mock_board_dout.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\dout.h"
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_halfbridge.c
-	"mock_board_halfbridge.h"
-
-1699298687 f:\microrally\udccd_controller\tests\mock_board\mock_board_halfbridge.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\halfbridge.h"
-
-1699476970 f:\microrally\udccd_controller\src\hw\board\halfbridge.h
-	<stdint.h>
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_odout.c
-	"mock_board_odout.h"
-
-1699298687 f:\microrally\udccd_controller\tests\mock_board\mock_board_odout.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\odout.h"
-
-1699298687 source:f:\microrally\udccd_controller\tests\mock_board\mock_board_setup.c
-	"mock_board_setup.h"
-
-1699298688 f:\microrally\udccd_controller\tests\mock_board\mock_board_setup.h
-	<stdio.h>
-	<stdlib.h>
-	"..\..\src\hw\board\setup.h"
-
-1699298688 source:f:\microrally\udccd_controller\tests\ut_hw\ut_analog.c
-	"ut_analog.h"
-	"..\mock_board\mock_board_ain.h"
-	"..\..\src\hw\analog.h"
-
-1699298688 source:f:\microrally\udccd_controller\tests\ut_hw\ut_buttons.c
-	"ut_buttons.h"
-	"..\mock_board\mock_board_din.h"
-	"..\mock_board\mock_board_dout.h"
-	"..\..\src\hw\buttons.h"
-
-1699298688 source:f:\microrally\udccd_controller\tests\ut_hw\ut_led_display.c
-	"ut_led_display.h"
-	"..\mock_board\mock_board_odout.h"
-	"..\..\src\hw\led_display.h"
-
-1699298688 f:\microrally\udccd_controller\tests\ut_hw\ut_led_display.h
-	<stdio.h>
-	<stdlib.h>
-
-1699298688 source:f:\microrally\udccd_controller\tests\ut_hw\ut_startup.c
-	"ut_startup.h"
-	"..\mock_board\mock_board_setup.h"
-	"..\..\src\hw\startup.h"
-
-1699391649 source:f:\microrally\udccd_controller\src\hw\hb_control.c
-	"board/utils/utils.h"
-	"board/halfbridge.h"
-	"hb_control.h"
-
-1699382733 f:\microrally\udccd_controller\src\hw\hb_control.h
-	<stdint.h>
-	"board/utils/faults.h"
-	"board/utils/fuses.h"
-	"board/halfbridge.h"
-
-1699393539 source:f:\microrally\udccd_controller\tests\ut_hw\ut_hb_control.c
-	"ut_hb_control.h"
-	"..\mock_board\mock_board_halfbridge.h"
-	"..\..\src\hw\hb_control.h"
-
-1699382733 f:\microrally\udccd_controller\tests\ut_hw\ut_hb_control.h
-	<stdio.h>
-	<stdlib.h>
-
-1699535389 d:\microrally\udccd_controller\src\hw\board\config.h
-	<stdint.h>
-
-1699535687 d:\microrally\udccd_controller\src\hw\config.h
-	<stdint.h>
-

firmware/tests/uDCCD_Unit_Tests_HW.layout

@@ -1,145 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_layout_file>
-	<FileVersion major="1" minor="0" />
-	<ActiveTarget name="Debug" />
-	<File name="mock_board\mock_board_setup.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="228" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\hb_control.c" open="0" top="0" tabpos="4" split="0" active="1" splitpos="0" zoom_1="5" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="5123" topLine="145" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_odout.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="56" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_odout.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="366" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_hb_control.c" open="0" top="0" tabpos="1" split="0" active="1" splitpos="0" zoom_1="3" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="88492" topLine="2027" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_ain.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="357" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\buttons.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="1649" topLine="24" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_led_display.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="176" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_analog.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="496" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_led_display.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="2" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="856" topLine="60" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\hb_control.h" open="0" top="0" tabpos="4" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="391" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_startup.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="161" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_dout.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="326" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_analog.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="129" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_halfbridge.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="281" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_din.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="164" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_buttons.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="221" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_din.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="52" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_halfbridge.h" open="0" top="0" tabpos="3" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="529" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_ain.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="550" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_buttons.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="10084" topLine="798" />
-		</Cursor>
-	</File>
-	<File name="hw_main.c" open="0" top="0" tabpos="3" split="0" active="1" splitpos="0" zoom_1="3" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="2087" topLine="55" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\board\utils\utils.h" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="181" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_hb_control.h" open="0" top="0" tabpos="2" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="302" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="ut_hw\ut_startup.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="606" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_setup.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="117" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="..\src\hw\analog.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="588" topLine="0" />
-		</Cursor>
-	</File>
-	<File name="mock_board\mock_board_dout.c" open="0" top="0" tabpos="0" split="0" active="1" splitpos="0" zoom_1="0" zoom_2="0">
-		<Cursor>
-			<Cursor1 position="54" topLine="0" />
-		</Cursor>
-	</File>
-</CodeBlocks_layout_file>

firmware/tests/uDCCD_Unit_Tests_Logic.cbp

@@ -1,71 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
-<CodeBlocks_project_file>
-	<FileVersion major="1" minor="6" />
-	<Project>
-		<Option title="uDCCD_Unit_Tests_Logic" />
-		<Option pch_mode="2" />
-		<Option compiler="gcc" />
-		<Build>
-			<Target title="Debug">
-				<Option output="bin/Debug/uDCCD_Unit_Tests_Logic" prefix_auto="1" extension_auto="1" />
-				<Option object_output="obj/Debug/" />
-				<Option type="1" />
-				<Option compiler="gcc" />
-				<Compiler>
-					<Add option="-g" />
-					<Add option="-DTESTING" />
-				</Compiler>
-			</Target>
-		</Build>
-		<Compiler>
-			<Add option="-Wall" />
-			<Add option="-DTESTING" />
-		</Compiler>
-		<Unit filename="../src/logic/coil.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/logic/coil.h" />
-		<Unit filename="../src/logic/display.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/logic/display.h" />
-		<Unit filename="../src/logic/force.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/logic/force.h" />
-		<Unit filename="../src/logic/pot.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/logic/pot.h" />
-		<Unit filename="../src/logic/user_force.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="../src/logic/user_force.h" />
-		<Unit filename="logic_main.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_coil.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_coil.h" />
-		<Unit filename="ut_logic/ut_display.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_display.h" />
-		<Unit filename="ut_logic/ut_force.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_force.h" />
-		<Unit filename="ut_logic/ut_pot.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_pot.h" />
-		<Unit filename="ut_logic/ut_user_force.c">
-			<Option compilerVar="CC" />
-		</Unit>
-		<Unit filename="ut_logic/ut_user_force.h" />
-		<Extensions>
-			<lib_finder disable_auto="1" />
-		</Extensions>
-	</Project>
-</CodeBlocks_project_file>